How to replace the EVAP canister purge valve and Vapor Canister on Mazda 3?

To replace an EVAP canister purge valve, start by removing the battery cover and disconnecting the cable from the negative battery terminal. After it, remove the cover of the upper engine by pulling it away from each side. Next, lift the cover off its central mounting posts. Separate the electrical connector from the canister purge valve and the EVAP line quick-connect. To remove the purge valve, first take off the purge valve and mounting bracket as an assembly. Next, press the lock tab then slide the purge valve off the mounting bracket. The EVAP canister is located under the vehicle in the spare tire well. Disconnect the cable from the negative battery terminal. Loosen the lug nuts on the rear wheel. Raise the front of the vehicle. Securely support the front of the vehicle on jackstands. Remove the rear wheels. Take off the fasteners and shield of the canister protection. Detach the ABS connector at the rear wheels. Unfasten the rear caliper brake line from the bracket. Remove the lower mounting bolts of rear shock absorber. Using a floor jack, support the rear crossmember, then loosen the six rear crossmember nuts and lower the rear crossmember 5-1/2 inches. Remove the breather hose and electrical connector from the EVAP canister. Next, remove the three EVAP line quick-connect fittings. Take off the mounting fasteners which hold the canister in and remove it. Installation is the reverse of removal, and an alignment may be necessary afterwards. To access the EVAP system leak detect pump assembly, first remove the EVAP canister. Next, release the two locking tabs to remove the heat shield from the EVAP canister vent solenoid. Before removing the leak detect pump assembly, loosen the hose clamp and disconnect the fuel vapor hose from the leak detect pump. Installation is the reverse of removal.

Genuine Mazda 3 Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Vapor Canisters found

View related parts
Mazda 3 Vapor Canister Part Number: LF67-13-970C
$264.44 MSRP: $352.66
You Save: $88.22 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister
- Replaces: LF67-13-970B, LF67-13-970, LF67-13-970A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2004-2012 Mazda 3 | Mazdaspeed, S, SP23, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Vapor Canister Part Number: LF66-13-970C
$208.58 MSRP: $278.15
You Save: $69.57 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister
- Replaces: LF66-13-970B, LF66-13-970A, LF66-13-970
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2004-2009 Mazda 3 | Mazdaspeed, S, SP23, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda 3 Vapor Canister Part Number: LF3T-13-970A
$224.88 MSRP: $299.89
You Save: $75.01 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister
- Replaces: LF3T-13-970
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2010-2013 Mazda 3 | Mazdaspeed, S, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Vapor Canister Part Number: PAJ1-13-970
$114.34 MSRP: $152.49
You Save: $38.15 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2019-2025 Mazda 3 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Canister Part Number: PAJ2-13-970
$67.23 MSRP: $89.65
You Save: $22.42 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2019-2025 Mazda 3 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Vapor Canister Part Number: PE8T-13-96Z
$321.59 MSRP: $428.87
You Save: $107.28 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2018 Mazda 3 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Vapor Canister Part Number: PE2G-13-970A
$199.05 MSRP: $265.45
You Save: $66.40 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2012-2013 Mazda 3 | Mazdaspeed, S, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Vapor Canister Part Number: PE07-13-970A
$217.53 MSRP: $290.09
You Save: $72.56 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2012 Mazda 3 | Mazdaspeed, S, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Vapor Canister Part Number: PE5B-13-96Z
$321.59 MSRP: $428.87
You Save: $107.28 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2018 Mazda 3 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Vapor Canister Part Number: PE8V-13-96ZA
Product Specifications
- Other Name: Canister
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2018 Mazda 3 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Vapor Canister Part Number: PE5J-13-96ZA
Product Specifications
- Other Name: Canister
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2018 Mazda 3 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS

Mazda 3 Vapor Canister

Looking for Vapor Canister with proven quality? Choose OEM Vapor Canister. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda 3 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine 3 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda 3 Vapor Canister Parts and Q&A

Vapor Canister
LF3T-13-970A
Q:
How to replace the EVAP canister purge valve and Vapor Canister on Mazda 3?
A:
To replace an EVAP canister purge valve, start by removing the battery cover and disconnecting the cable from the negative battery terminal. After it, remove the cover of the upper engine by pulling it away from each side. Next, lift the cover off its central mounting posts. Separate the electrical connector from the canister purge valve and the EVAP line quick-connect. To remove the purge valve, first take off the purge valve and mounting bracket as an assembly. Next, press the lock tab then slide the purge valve off the mounting bracket. The EVAP canister is located under the vehicle in the spare tire well. Disconnect the cable from the negative battery terminal. Loosen the lug nuts on the rear wheel. Raise the front of the vehicle. Securely support the front of the vehicle on jackstands. Remove the rear wheels. Take off the fasteners and shield of the canister protection. Detach the ABS connector at the rear wheels. Unfasten the rear caliper brake line from the bracket. Remove the lower mounting bolts of rear shock absorber. Using a floor jack, support the rear crossmember, then loosen the six rear crossmember nuts and lower the rear crossmember 5-1/2 inches. Remove the breather hose and electrical connector from the EVAP canister. Next, remove the three EVAP line quick-connect fittings. Take off the mounting fasteners which hold the canister in and remove it. Installation is the reverse of removal, and an alignment may be necessary afterwards. To access the EVAP system leak detect pump assembly, first remove the EVAP canister. Next, release the two locking tabs to remove the heat shield from the EVAP canister vent solenoid. Before removing the leak detect pump assembly, loosen the hose clamp and disconnect the fuel vapor hose from the leak detect pump. Installation is the reverse of removal.

Related Mazda 3 Parts

Browse by Year

2025 Vapor Canister 2024 Vapor Canister 2023 Vapor Canister 2022 Vapor Canister 2021 Vapor Canister 2020 Vapor Canister 2019 Vapor Canister 2018 Vapor Canister 2017 Vapor Canister 2016 Vapor Canister 2015 Vapor Canister 2014 Vapor Canister 2013 Vapor Canister 2012 Vapor Canister 2011 Vapor Canister 2010 Vapor Canister 2009 Vapor Canister 2008 Vapor Canister 2007 Vapor Canister 2006 Vapor Canister 2005 Vapor Canister 2004 Vapor Canister

Genuine Mazda 3 Vapor Canister

11 Vapor Canisters found

Mazda 3 Vapor Canister Part Number: LF67-13-970C

Mazda 3 Vapor Canister Part Number: LF66-13-970C

Mazda 3 Vapor Canister Part Number: LF3T-13-970A

Mazda 3 Vapor Canister Part Number: PAJ1-13-970

Mazda 3 Canister Part Number: PAJ2-13-970

Mazda 3 Vapor Canister Part Number: PE8T-13-96Z

Mazda 3 Vapor Canister Part Number: PE2G-13-970A

Mazda 3 Vapor Canister Part Number: PE07-13-970A

Mazda 3 Vapor Canister Part Number: PE5B-13-96Z

Mazda 3 Vapor Canister Part Number: PE8V-13-96ZA

Mazda 3 Vapor Canister Part Number: PE5J-13-96ZA

Mazda 3 Vapor Canister

Mazda 3 Vapor Canister Parts and Q&A

Related Mazda 3 Parts

Browse by Year