Take away the wiper arm nuts and measure the position of the wiper arms in relation to their shafts and then remove the two wiper arms. Next, take off the upper and the bottom cowl panels. Apply a tape on the lower ends of the windshield to avoid breaking the glass. The next step is to extract the wiper motor and link assembly mounting bolts, and slide the motor and link assembly forward and off the locating pin to remove the wiper motor and link assembly. Unplug the electric connector with the wiper motor and remove the nut holding the crank arm to the shaft of the motor. Indicate the connection between the crank arm and the motor shaft and take the crank arm off the shaft. Lastly, disassemble the screwdriver on the motor that secures the motor to the mounting bracket, and remove the motor out of the mounting bracket, and install it back into the mounting bracket likewise.