How to remove and inspect the lower control arm on Mazda 626?

Lift the front of the vehicle and put on jackstands. In the case of one lower control arm removal, disconnect the damaged end of the stabilizer bar; in the case of the removal of both, completely remove the stabilizer bar. Eliminate the wheels and splash shields. Removal of control arm bushing bolts that hold the control arm on to the engine cradle. Unscrew the balljoint-to-steering knuckle nut and interlock the balljoint with the steering knuckle, a pry bar may be needed. This is accomplished by lowering the control arm of the vehicle. Check the control arm bushings, the balljoint, and dust boot, both in regards to damage and wear. The replacement of these parts needs specific tools and techniques and, therefore, the control arm assembly must be brought to the dealer or shop equipped with the right tools to do it. When attaching the lower control arm, the same procedure is involved in the removal process, with the exception that the lower control arm-to-engine cradle bushing Bolts are not tightened to their established torque until the car has been lowered to the ground and all its weight loaded to the suspension.

Genuine Mazda 626 Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Control Arms found

View related parts
Mazda 626 Control Arm Part Number: GA2B-34-300A
$21.15 MSRP: $138.56
You Save: $117.41 (85%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Right, Lower; Control Arm
- Position: Right
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1993-1997 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Control Arm Part Number: GA2B-34-350A
$106.50 MSRP: $142.03
You Save: $35.53 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm(Left), Lower; Control Arm
- Position: Left
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1993-1997 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Lower Control Arm Part Number: GG2A-34-300C
$127.08 MSRP: $169.47
You Save: $42.39 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Right, Lower
- Position: Right
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2000-2002 Mazda 626 | ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Control Arm Part Number: G030-34-300F
Product Specifications
- Other Name: Arm Right, Lower; Control Arm
- Position: Right
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1984-1987 Mazda 626 | DX, GT, LX | 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Mazda 626 Lower Control Arm Part Number: G238-28-300B
Product Specifications
- Other Name: Arm, Rear Lower; Lower Control Arm
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988 Mazda 626 | DX, LX, Turbo, Turbo 4WS | 4 Cyl 2.2 L GAS
View related parts
Mazda 626 Lower Control Arm Part Number: GG2A-34-350C
Product Specifications
- Other Name: Arm(Left), Lower
- Position: Left
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2000-2002 Mazda 626 | ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Control Arm Part Number: GJ22-34-300B
Product Specifications
- Other Name: Arm Right, Lower; Control Arm
- Position: Right
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1992 Mazda 626 | DX, GT, LE, LX, Turbo, Turbo 4WS | 4 Cyl 2.2 L GAS
View related parts
Mazda 626 Control Arm Part Number: GJ22-34-350B
Product Specifications
- Other Name: Arm(Left), Lower; Control Arm
- Position: Left
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1992 Mazda 626 | DX, GT, LE, LX, Turbo, Turbo 4WS | 4 Cyl 2.2 L GAS
View related parts
Mazda 626 Control Arm Part Number: GJ83-34-350B
Product Specifications
- Other Name: Arm(Left), Lower; Control Arm
- Position: Left
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1991 Mazda 626 | DX, GT, LE, LX, Turbo, Turbo 4WS | 4 Cyl 2.2 L GAS
View related parts
Mazda 626 Control Arm Part Number: GN9834300A
Product Specifications
- Other Name: Arm Right, Lower
- Position: Right
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1991-1992 Mazda 626 | DX, GT, LE, LX | 4 Cyl 2.2 L GAS

Mazda 626 Control Arm

Looking for Control Arm with proven quality? Choose OEM Control Arm. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda 626 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine 626 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda 626 Control Arm Parts and Q&A

Control Arm
GJ22-34-300B
Q: How to remove and inspect the lower control arm on Mazda 626?
A:
Lift the front of the vehicle and put on jackstands. In the case of one lower control arm removal, disconnect the damaged end of the stabilizer bar; in the case of the removal of both, completely remove the stabilizer bar. Eliminate the wheels and splash shields. Removal of control arm bushing bolts that hold the control arm on to the engine cradle. Unscrew the balljoint-to-Steering Knuckle nut and interlock the balljoint with the steering knuckle, a pry bar may be needed. This is accomplished by lowering the control arm of the vehicle. Check the control arm bushings, the balljoint, and dust boot, both in regards to damage and wear. The replacement of these parts needs specific tools and techniques and, therefore, the control arm assembly must be brought to the dealer or shop equipped with the right tools to do it. When attaching the lower control arm, the same procedure is involved in the removal process, with the exception that the lower control arm-to-engine cradle bushing Bolts are not tightened to their established torque until the car has been lowered to the ground and all its weight loaded to the suspension.