How to check and adjust the Parking Brake Cable on Mazda 626?

To test the parking brake, press on the handle and make sure that it is fully engaged between 7 and 9 clicks. To make the adjustment, use the starter button, and press the brake two or three times and switch the engine off. Next, take off the parking brake cover and turn the adjusting nut with a screwdriver until the lever stroke is at the correct specification and make sure the parking brake warning light on the dashboard goes on after turning the lever a notch.

How to remove and install the Parking Brake Cable assembly on Mazda 626?

Raise the rear of the vehicle and support it securely on jackstands, then remove the cable clip. Next, take out the trailing brake shoe assembly and disconnect the cable from the shoe operating lever. Remove the retaining bolts and the adjusting nut to take the cable assembly out of the vehicle. For installation, reverse the removal process, applying white lithium base grease to the cable grommet before installation. After installing, turn the adjusting nut until the equalizer is at a 90° angle to the front brake cable.

Genuine Mazda 626 Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Parking Brake Cables found

View related parts
Mazda 626 Front Cable Part Number: GD7A-44-150
$13.93 MSRP: $18.57
You Save: $4.64 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Parking-Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1998-2002 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Front Cable Part Number: GJ21-44-150
$35.13 MSRP: $46.84
You Save: $11.71 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Parking Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1992 Mazda 626 | DX, GT, LE, LX, Turbo, Turbo 4WS | 4 Cyl 2.2 L GAS
View related parts
Mazda 626 Rear Cable Part Number: G217-44-420H
$18.67 MSRP: $24.50
You Save: $5.83 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Left, Park
- Position: Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1992 Mazda 626 | DX, LE, LX | 4 Cyl 2.2 L GAS
View related parts
Mazda 626 Front Cable Part Number: G03044150B
Product Specifications
- Other Name: Front Park Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1984-1987 Mazda 626 | DX, GT, LX | 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Mazda 626 Rear Cable Part Number: G037-44-420G
Product Specifications
- Other Name: Cable Left, Park
- Position: Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1986-1987 Mazda 626 | GT | 4 Cyl 2.0 L GAS
View related parts
Mazda 626 Rear Cable Part Number: G217-44-410G
Product Specifications
- Other Name: Cable Right, Parking Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1992 Mazda 626 | DX, LE, LX | 4 Cyl 2.2 L GAS
View related parts
Mazda 626 Rear Cable Part Number: G238-44-410G
Product Specifications
- Other Name: Cable Right, Parking Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1991 Mazda 626 | GT, Turbo, Turbo 4WS | 4 Cyl 2.2 L GAS
View related parts
Mazda 626 Rear Cable Part Number: GA2A-44-410E
Product Specifications
- Other Name: Cable Right, Park
- Position: Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1993-1997 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Rear Cable Part Number: GA2B-44-420D
Product Specifications
- Other Name: Cable Left, Parking
- Position: Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1993-1997 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

Mazda 626 Parking Brake Cable

Looking for Parking Brake Cable with proven quality? Choose OEM Parking Brake Cable. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda 626 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine 626 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda 626 Parking Brake Cable Parts and Q&A

Rear Cable
G217-44-410G
Q: How to check and adjust the Parking Brake Cable on Mazda 626?
A:
To test the parking brake, press on the handle and make sure that it is fully engaged between 7 and 9 clicks. To make the adjustment, use the starter button, and press the brake two or three times and switch the engine off. Next, take off the parking brake cover and turn the adjusting nut with a screwdriver until the lever stroke is at the correct specification and make sure the parking brake warning light on the dashboard goes on after turning the lever a notch.
Rear Cable
G217-44-420H
Q: How to remove and install the Parking Brake Cable assembly on Mazda 626?
A:
Raise the rear of the vehicle and support it securely on jackstands, then remove the cable clip. Next, take out the trailing brake shoe assembly and disconnect the cable from the shoe operating lever. Remove the retaining bolts and the adjusting nut to take the cable assembly out of the vehicle. For installation, reverse the removal process, applying white lithium base grease to the cable grommet before installation. After installing, turn the adjusting nut until the equalizer is at a 90° angle to the front brake cable.