×
- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Mazda Parts
My Garage
My Account
Cart
Genuine Mazda B2200 Exhaust Manifold
Engine Exhaust Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Exhaust Manifold found
Mazda B2200 Manifold Part Number: FE85-13-450A
Mazda B2200 Exhaust Manifold
The Mazda B2200 Exhaust Manifold is a pipe that diverts hot gases and helps the truck to breathe in order to ensure that passengers are not harmed. The Mazda unit, which is mounted on the outlet of the engine, combines the flow of the burnt mixture of all four cylinders into a single line and directs it to the catalytic converter, muffler and tip, so that the fumes produced under the hood are not permitted to linger or to escape into the cabin. This smooth flow of the stream prevents reversion of intake; fresh air and fuel have sufficient space to rush into the chambers, therefore maintaining keen power delivery and a constant idle. The proof in these early carbureted pickups was a dense cast iron component that was capable of enduring extreme temperature changes, whereas the later fuel-injected ones could utilize a marginally lighter stainless component that warms up fast to reduce emissions. Although the material is different, the underlying route and bolt pattern remain the same, which is why the two styles have a gasketed seal ensuring the joint is sealed against leakage and cracks. In case of warping or fracturing the Exhaust Manifold, the air-to-fuel ratio in the engine becomes unbalanced, leading to a loss of performance and the release of harmful carbon monoxide into the surrounding atmosphere; hence replacement is vital. This is an innocent but essential component that owners appreciate due to the rugged nature with which Mazda compact trucks are identified, and each Mazda driver enjoys the safeguarding, economy and lifespan that a healthy Exhaust Manifold affords them as part of the reliable B2200 family.
Looking for Exhaust Manifold with proven quality? Choose OEM Exhaust Manifold. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda B2200 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine B2200 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.
Mazda B2200 Exhaust Manifold Parts and Q&A
- Q: How to remove and install the exhaust manifold on Mazda B2200?A:The exhaust manifold of different types of engines needs to be removed and installed; this process starts by lifting and supporting the vehicle. To remove the 2.2L engine, remove the exhaust pipe off the manifold, remove the manifold and the nuts that hold it in place and apply graphite grease on the mating surfaces and reassemble. With the 2.6L (1987-88) engine, disconnect negative battery cable, disassemble air cleaner assembly, power steering pump belt and then disassemble exhaust pipe and air injection tube assembly. Once the manifold is removed and the surfaces cleaned, a new gasket should be installed and the mounting screws tightened. To disassemble the 2.6L (1989-93) engine, disconnected battery ground, emptied the cooling system and removed the oil dipstick tube then unbolted the manifold and wiped the mating surfaces. In the case of the MPV, eliminate the negative battery cable, the exhaust pipe and subsequently the manifold with care to clean all the surfaces before installation. In the case of the 4.0L, loosen the negative battery cable, detach required parts to create clearance and unbolt the manifold and clean the mating areas before re-connection. Make sure fasteners are tightened to required tightening values.
