How to replace a Brake Pads on Mazda MPV?

This is done to front and rear brakes though only the front has been illustrated. All the models have a caliper design that is fundamentally similar. Start by taking out the cover of the brake fluid reservoir. Put on the parking brake and block the wheels, loosen the vehicle lug nuts, lift it and put it on jackstands. Install one brake assembly at a time, with reference to the other, removed, and assemble the rest of the wheels. Check the brake disc; any machining that is needed should be done, at which point the pads can also be removed off the calipers. To remove pad, be sure to read captions beneath each of the illustrations in order. After removing the caliper, reinsert the piston(s) into the bore with a C-clamp to create space in which the new brake pads will be fitted, taking special care not to spill the fluid in the master cylinder. Then to install the new pads, undo the process of removal. Once the job is done, press on the brake pedal several times to make sure the pads are in contact with the disc after which it is necessary to examine the leakage of fluid and to make sure the brakes are functioning normally before entering the traffic.

Genuine Mazda MPV Brake Pads

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Pads found

View related parts
Mazda MPV Brake Pads Part Number: LEY4-26-48ZA
$83.86 MSRP: $111.84
You Save: $27.98 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Sub Set, Rear Caliper; Brake Pad
- Replaces: LEY4-26-48Z
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2004-2006 Mazda MPV | ES, LX, LX-SV | 6 Cyl 3.0 L GAS
View related parts
Mazda MPV Brake Pads Part Number: LDY7-33-28ZA
$105.04 MSRP: $140.07
You Save: $35.03 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Set, Front Caliper; Brake Pad, Front Pad
- Replaces: LCY2-33-28ZA, LDY7-33-23ZA, LCY2-33-23Z, LCY2-33-23ZA, LCY2-33-23ZB, LDY7-33-23Z, LDY7-33-28Z, LCY2-33-28Z
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2000-2006 Mazda MPV | DX, ES, LX, LX-SV | 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda MPV Front Pads Part Number: LCY1-33-28Z
$19.86 MSRP: $139.99
You Save: $120.13 (86%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Set, Front Caliper; Front Pad
- Position: Front
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1992-1995 Mazda MPV | Cargo, L, LX, LXE, Passenger | 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda MPV Front Pads Part Number: LCY1-33-23Z
$112.83 MSRP: $150.46
You Save: $37.63 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Set, Front Caliper; Front Pad
- Position: Front
- Replaces: LBZ2-33-23Z, LBZ2-33-23ZA
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1996-1998 Mazda MPV | DX, ES, LX | 6 Cyl 3.0 L GAS
View related parts
Mazda MPV Pads Part Number: LCY1-26-43Z
$125.48 MSRP: $167.33
You Save: $41.85 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Set, Rear Caliper; Pad, Rear Pad
- Replaces: J0Y1-26-43ZB, J0Y1-26-48Z, J0Y1-26-43ZA, LBY0-26-43Z, J0Y1-26-43Z
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1994-1998 Mazda MPV | DX, ES, L, LX, LXE, Passenger | 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda MPV Front Pads Part Number: LAY3-33-28Z-9U
Product Specifications
- Other Name: Pad Set, Front Caliper; Front Pad
- Position: Front
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1992-1993 Mazda MPV | Cargo, Passenger | 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS

Mazda MPV Brake Pads

Mazda MPV Brake Pads are applied to provide the force to decelerate and stop the car due to their contact with the rotating brake disc and transforming kinetic energy into heat. The pads consist of a friction compound, which is molded or riveted to a metal backing plate providing a material to be transferred to the rotor surface, creating the resistance needed to decelerate. Each rotor has two pads that work in conjunction and are pressed together by a hydraulic caliper pressing against the disc on both sides. The wear of the friction lining is measured by the remaining thickness, and the factory requirements impose a minimum limit, with many models having electronic sensors or audible alerts to alert the driver to when it is time to replace. The compound is commuting, errand, and steady-cruising oriented, and provides reliable performance without undue fade under normal loads and temperatures. In the case of the Mazda family car, this balance will help in providing the car with confidence in stopping performance in normal operation without exceeding acceptable noise, dust and rotor wear. These Mazda Brake Pads will also have to be checked on a regular basis since they will wear down and become less effective and increase in stopping distance with time. There are a number of material types in the industry such as non-metallic, semi-metallic, fully metallic, and even ceramic blends, each of which provides various degrees of friction stability, durability and noise control; any given option must comply with standards regarding appropriate thickness and thermal management. Early replacement of appropriately matched parts is beneficial to ensure the same braking feel and protect the braking system of the Mazda MPV, and its operation is safe when the Brake Pads do not exceed its service limits.

Looking for Brake Pads with proven quality? Choose OEM Brake Pads. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda MPV parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine MPV part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda MPV Brake Pads Parts and Q&A

Front Pads
LAY3-33-28Z-9U
Q:
How to replace a Brake Pads on Mazda MPV?
A:
This is done to front and rear brakes though only the front has been illustrated. All the models have a caliper design that is fundamentally similar. Start by taking out the cover of the brake fluid reservoir. Put on the parking brake and block the wheels, loosen the vehicle lug nuts, lift it and put it on jackstands. Install one brake assembly at a time, with reference to the other, removed, and assemble the rest of the wheels. Check the brake disc; any machining that is needed should be done, at which point the pads can also be removed off the calipers. To remove pad, be sure to read captions beneath each of the illustrations in order. After removing the caliper, reinsert the piston(s) into the bore with a C-clamp to create space in which the new brake pads will be fitted, taking special care not to spill the fluid in the master cylinder. Then to install the new pads, undo the process of removal. Once the job is done, press on the brake pedal several times to make sure the pads are in contact with the disc after which it is necessary to examine the leakage of fluid and to make sure the brakes are functioning normally before entering the traffic.