My Garage
Cart

Genuine Mazda RX-7 Ignition Switch

Starter Ignition Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Ignition Switches found

  • Mazda RX-7 Ignition Switch - FD01-66-151A
    Diagram for Mazda RX-7 Ignition Switch - FD01-66-151A
    View related parts

    Mazda RX-7 Ignition Switch Part Number: FD01-66-151A

    $48.05 MSRP: $64.09
    You Save: $16.04 (26%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Switch
    • Replaces: FD01-66-151
    • Warranty: This genuine part is guaranteed by Mazda's factory warranty.
    Fits the following Vehicles:
    • 1993-1995 Mazda RX-7 | Base, R1, R2, Touring | 2 Cyl 1.3 L GAS
  • Mazda RX-7 Ignition Switch - FC01-66-151
    Diagram for Mazda RX-7 Ignition Switch - FC01-66-151
    View related parts
    Product Specifications
    • Other Name: Switch
    • Warranty: This genuine part is guaranteed by Mazda's factory warranty.
    Fits the following Vehicles:
    • 1990-1991 Mazda RX-7 | Base, Convertible, GTU, GTUs, GXL, GXL 2+2, Turbo | 2 Cyl 1.3 L GAS
  • Mazda RX-7 Ignition Switch - FA54-66-151
    View related parts
    Product Specifications
    • Other Name: Switch
    • Warranty: This genuine part is guaranteed by Mazda's factory warranty.
    Fits the following Vehicles:
    • 1984-1985 Mazda RX-7 | GS, GSL, GSL-SE, S | 2 Cyl 1.1 L GAS, 2 Cyl 1.3 L GAS
  • Mazda RX-7 Ignition Switch - FB01-66-151
    Diagram for Mazda RX-7 Ignition Switch - FB01-66-151
    View related parts
    Product Specifications
    • Other Name: Switch
    • Warranty: This genuine part is guaranteed by Mazda's factory warranty.
    Fits the following Vehicles:
    • 1986-1990 Mazda RX-7 | 10th Anniversary, Base, Base 2+2, Convertible, GTU, GTUs, GXL, GXL 2+2, LX, LX 2+2, SE, SE 2+2, Sport, Turbo | 2 Cyl 1.3 L GAS
  • Mazda RX-7 Ignition Switch - FC02-66-151
    Diagram for Mazda RX-7 Ignition Switch - FC02-66-151
    View related parts
    Product Specifications
    • Other Name: Switch
    • Warranty: This genuine part is guaranteed by Mazda's factory warranty.
    Fits the following Vehicles:
    • 1990-1991 Mazda RX-7 | Base, Convertible, GTU, GTUs, GXL, GXL 2+2, Turbo | 2 Cyl 1.3 L GAS

Mazda RX-7 Ignition Switch

The Mazda RX-7 Ignition Switch is the gateway that activates the electrical and starting systems of the rotary sports car, allowing the driver to bring the engine to life with a single turn or push. The switch is basic in nature since it transmits a signal to the on-board computer, which in turn switches on the starter solenoid, fuel delivery, and other miscellaneous circuits such as lights or radio in order to crank the car and run normally. The first design of the Ignition Switch consisted of a basic mechanical key, which was only complete when the correct cut was matched with internal tumblers. The initial third generation Mazda models were based on this tactile system, providing the owners with first-hand control. With the advancement in technology, subsequent production years retained the same key but added an immobiliser to verify a coded transponder, providing an electronic deterrent to theft without requiring a redesign of the fundamental plug-and-play in-car wiring. The last modification made on the car replaces the key cylinder with a push-button on the dash but still checks the transponder, and when the starter is switched on, it instantly restarts the car safely. All Mazda Ignition Switch choices maintain a vehicle-specific and easy-to-wire installation, and therefore replacement is not complicated in case wear or tampering is experienced. Among the standard keyed version, the immobiliser upgraded version, and the keyless button version, the technicians can find three different approaches, all of which are simple yet progressively more secure without losing the lively nature that Mazda fanatics expect of the RX-7.

Looking for Ignition Switch with proven quality? Choose OEM Ignition Switch. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda RX-7 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine RX-7 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda RX-7 Ignition Switch Parts and Q&A

  • Q: How should the ignition switch and steering lock be checked for electrical faults while attached to the steering column on Mazda RX-7?
    A:
    Due to the method of attachment to the steering column, the ignition switch and steering lock should be checked for electrical faults while still attached to the column. Like the combination switch, continuity between specified terminals is checked using an ohmmeter, and the interconnection diagram provides the proper continuity check.

Related Mazda RX-7 Parts