Does this procedure apply to engines with timing cover gaskets where the oil seal is located in the front cover instead of the oil pump on Mazda 929?

The process involves the use of engines that have timing chains with the oil cover in the front cover rather than the oil pump. In GLC and 1979-82 626 models, the front cover oil seal may be frequently changed without try to remove the front cover. Start by emptying the cooling system and the radiator (where applicable) to ensure that there is enough clearance, but this is not necessarily required with front wheel drive GLC models. Then take out the drive belts and unscrew the crankshaft pulley. Put a small prytool carefully together with the seal out of the timing chain cover, and then completely clean the seal bore of all dirt and grease since this can cause timely failure of the new oil seal. The new seal is installed by coating the lip of the new seal with engine oil and then pushing the new seal into position with a piece of pipe, or socket, which is a little smaller than the bore of the oil pump in order to fit into the engine oil pump bore, making sure that the front edge of the seal fits into the front edge of the timing chain cover. Apply sealant on the pulley surface of the bolt, install and place the crankshaft pulley and tighten the crankshaft pulley bolt to 80-87 ft. lbs. (110-120 Nm) on the GLC or tighten the crankshaft pulley bolt to 101-108 ft. lbs. (140-150 Nm) on the 626. Lastly, attach and tighten the drive belts and in the case of an all-electric motor, replace the radiator and refill the cooling system until it fills completely with water.

Genuine Mazda Timing Cover Gasket

Engine Timing Cover Gasket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

45 Timing Cover Gaskets found

View related parts
Mazda Front Cover Gasket Part Number: B61P-10-544
$8.00 MSRP: $10.67
You Save: $2.67 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Rubber
- Position: Front
Fits the following Mazda Models:
- Miata | 1999-2005, 1997 | 10th Anniversary, Base, LS, M Edition, Mazdaspeed, SE, Shinsen, STO | 4 Cyl 1.8 L GAS
View related parts
Mazda Timing Cover Gasket Part Number: 1F00-10-612
$9.76 MSRP: $13.02
You Save: $3.26 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gasket; Front Cover Gasket
Fits the following Mazda Models:
- B4000 | 1998-2009 | Base, DS, SE, Troy Lee | 6 Cyl 4.0 L GAS
View related parts
Mazda Timing Cover Gasket Part Number: AJ57-10-513
$10.44 MSRP: $13.91
You Save: $3.47 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gasket(C), Timing Chain Cover; Timing Cover Gasket, Timing Cover Gasket Set
- Position: Front
- Replaces: AJ03-10-513, GY01-10-513
Fits the following Mazda Models:
- MPV | 2000-2006 | DX, ES, LX, LX-SV | 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- Tribute | 2008-2011, 2001-2004 | DX, ES, LX, S | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mazda Front Cover Gasket Part Number: KL01-10-535
$11.38 MSRP: $15.17
You Save: $3.79 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Rubber; Upper Timing Cover Seal
- Position: Right
Fits the following Mazda Models:
- 626 | 1993-2002 | ES, LX | 6 Cyl 2.5 L GAS
- MX-3 | 1992-1994 | Base, GS, SE | 6 Cyl 1.8 L GAS
- MX-6 | 1993-1997 | LS, M Edition | 6 Cyl 2.5 L GAS
- Millenia | 1995-2002 | Base, L | 6 Cyl 2.5 L GAS
View More
View related parts
Mazda Front Cover Gasket Part Number: B61P-10-514
$12.44 MSRP: $16.59
You Save: $4.15 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gasket(C), Timing Belt(Left)
- Position: Front
Fits the following Mazda Models:
- Miata | 1999-2000, 1997 | 10th Anniversary, Base, LS, M Edition, SE, STO | 4 Cyl 1.8 L GAS
View related parts
Mazda Timing Cover Gasket Part Number: B660-10-502B
$16.68 MSRP: $22.24
You Save: $5.56 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gasket, Lower; Timing Cover Gasket
- Position: Left
Fits the following Mazda Models:
- 323 | 1991-1994, 1988-1989 | Base, DX, GT, GTX, LX, SE | 4 Cyl 1.6 L GAS
- Miata | 1990-1996 | Base, LE, M Edition, SE | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
- Protege | 1990-1994 | 4WD, Base, DX, LX, SE | 4 Cyl 1.8 L GAS
View More
View related parts
Mazda Front Cover Gasket Part Number: KJ01-10-536
$2.86 MSRP: $22.25
You Save: $19.39 (88%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber, Seal
- Position: Front
Fits the following Mazda Models:
- Millenia | 1995-2002 | Base, Millennium Edition, S | 6 Cyl 2.3 L GAS
View related parts
Mazda Timing Cover Gasket Part Number: B660-10-522
$18.80 MSRP: $25.08
You Save: $6.28 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gasket, Timing Cover; Timing Cover Gasket
- Position: Right
Fits the following Mazda Models:
- 323 | 1991-1994, 1988-1989 | Base, DX, GT, GTX, LX, SE | 4 Cyl 1.6 L GAS
- Miata | 1990-1996 | Base, LE, M Edition, SE | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
- Protege | 1990-1994 | 4WD, Base, DX, LX, SE | 4 Cyl 1.8 L GAS
View More
View related parts
Mazda Timing Cover Seal Part Number: N3R1-10-507
$19.31 MSRP: $25.75
You Save: $6.44 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Oil
- Replaces: N3A1-10-507, N3A1-10-507-PT
Fits the following Mazda Models:
- RX-8 | 2004-2011 | 40th Anniversary Edition, Base, Grand Touring, R3, Shinka, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Timing Cover Gasket Part Number: B660-10-512A
$20.44 MSRP: $27.26
You Save: $6.82 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gasket, Upper; Front Cover Gasket
Fits the following Mazda Models:
- 323 | 1991-1994, 1988-1989 | Base, DX, GT, GTX, LX, SE | 4 Cyl 1.6 L GAS
- Protege | 1990-1994 | 4WD, Base, DX, LX, SE | 4 Cyl 1.8 L GAS
View related parts
Mazda Timing Cover Gasket Set Part Number: AJ03-10-SH0
$89.53 MSRP: $119.39
You Save: $29.86 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gasket Set, Lower Engine; Lower Gasket Kit, Timing Cover Gasket Set
Fits the following Mazda Models:
- Tribute | 2008-2011, 2001-2006 | DX, ES, LX, S | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mazda Front Cover Gasket Part Number: B61P-10-513
$7.83 MSRP: $10.43
You Save: $2.60 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gasket Inner, Timing(Left)
- Position: Front
Fits the following Mazda Models:
- Miata | 1999-2000, 1997, 1990-1994 | 10th Anniversary, Base, LE, LS, M Edition, SE, STO | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
View related parts
Mazda Gasket Part Number: AJ57-10-523
$8.09 MSRP: $10.79
You Save: $2.70 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gasket(Right), Timing Chain Cover; Gasket, Timing Cover Gasket, Timing Cover Seal
- Position: Front
- Replaces: AJ03-10-523, GY01-10-523
Fits the following Mazda Models:
- 6 | 2003-2008 | S | 6 Cyl 3.0 L GAS
- MPV | 2000-2006 | DX, ES, LX, LX-SV | 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- Tribute | 2008-2011, 2001-2004 | DX, ES, LX, S | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View More
View related parts
Mazda Gasket Part Number: AJ57-10-522
$8.16 MSRP: $10.88
You Save: $2.72 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gasket(Left), Timing Chain Cover; Gasket, Timing Cover Gasket, Timing Cover Seal
- Position: Front
- Replaces: AJ03-10-522, GY01-10-522
Fits the following Mazda Models:
- 6 | 2003-2008 | S | 6 Cyl 3.0 L GAS
- MPV | 2000-2006 | DX, ES, LX, LX-SV | 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- Tribute | 2008-2011, 2001-2004 | DX, ES, LX, S | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View More
View related parts
Mazda Front Cover Gasket Part Number: KL01-10-536B
$8.01 MSRP: $10.69
You Save: $2.68 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Rubber; Upper Timing Cover Seal
- Position: Left
Fits the following Mazda Models:
- 626 | 1993-2002 | ES, LX | 6 Cyl 2.5 L GAS
- MX-3 | 1992-1994 | Base, GS, SE | 6 Cyl 1.8 L GAS
- MX-6 | 1993-1997 | LS, M Edition | 6 Cyl 2.5 L GAS
- Millenia | 1995-2002 | Base, L | 6 Cyl 2.5 L GAS
View More
View related parts
Mazda Front Cover Gasket Part Number: B61P-10-512
$11.55 MSRP: $15.41
You Save: $3.86 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gasket (Left)
- Position: Front
Fits the following Mazda Models:
- Miata | 1999-2000, 1997, 1990-1994 | 10th Anniversary, Base, LE, LS, M Edition, SE, STO | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
View related parts
Mazda Front Cover Gasket Part Number: KL01-10-533B
$26.41 MSRP: $35.22
You Save: $8.81 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Rubber; Lower Timing Cover Seal
- Position: Front
Fits the following Mazda Models:
- 626 | 1993-2002 | ES, LX | 6 Cyl 2.5 L GAS
- MX-3 | 1992-1994 | Base, GS, SE | 6 Cyl 1.8 L GAS
- MX-6 | 1993-1997 | LS, M Edition | 6 Cyl 2.5 L GAS
- Millenia | 1995-2002 | Base, L | 6 Cyl 2.5 L GAS
View More
View related parts
Mazda Front Cover Gasket Part Number: P51B-10-503
$2.36 MSRP: $3.14
You Save: $0.78 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gasket; Front Cover Gasket
Fits the following Mazda Models:
- MX-5 Miata | 2016-2022 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, RF GT, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Front Cover Gasket Part Number: P51B-10-502
$2.81 MSRP: $3.74
You Save: $0.93 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gasket; Front Cover Gasket
Fits the following Mazda Models:
- MX-5 Miata | 2016-2022 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, RF GT, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Front Cover Gasket Part Number: JF01-10-503
$7.53 MSRP: $10.04
You Save: $2.51 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gasket Inner, Timing(Right)
- Position: Front
Fits the following Mazda Models:
- 929 | 1988-1991 | Base, S | 6 Cyl 3.0 L GAS

| Page 1 of 3 |Next >

1-20 of 45 Results

Mazda Timing Cover Gasket

Every part of the car is important. Your vehicle's performance will be compromised if something goes wrong with the Mazda Timing Cover Gasket. Therefore, for your smooth driving and safety, you need regular checks and timely replacements. Whenever you need replacements, opt for genuine Mazda Timing Cover Gaskets. Because they meet the manufacturer's criteria, it guarantees that replacements fit perfectly. Thus, these make better choices for people who care about driving. Why should you shop at MazdaPartsNow.com? We sell genuine Mazda Timing Cover Gaskets. In our online catalog, there is a wide range of different parts. These are delivered directly from authorized Mazda dealers only so that customers can be sure of their security throughout any transaction while using our website. Furthermore, you can also quickly search for OEM parts you want because of our user-friendly site navigation. Choose us for a genuine Mazda Timing Cover Gasket that keeps your car running like new.

Mazda Timing Cover Gasket Parts and Q&A

Timing Cover Gasket
JF01-10-512
Q: Does this procedure apply to engines with timing cover gaskets where the oil seal is located in the front cover instead of the oil pump on Mazda 929?
A:
The process involves the use of engines that have timing chains with the oil cover in the front cover rather than the oil pump. In GLC and 1979-82 626 models, the front cover oil seal may be frequently changed without try to remove the front cover. Start by emptying the cooling system and the radiator (where applicable) to ensure that there is enough clearance, but this is not necessarily required with front wheel drive GLC models. Then take out the drive belts and unscrew the crankshaft pulley. Put a small prytool carefully together with the seal out of the timing chain cover, and then completely clean the seal bore of all dirt and grease since this can cause timely failure of the new oil seal. The new seal is installed by coating the lip of the new seal with engine oil and then pushing the new seal into position with a piece of pipe, or socket, which is a little smaller than the bore of the oil pump in order to fit into the engine oil pump bore, making sure that the front edge of the seal fits into the front edge of the timing chain cover. Apply sealant on the pulley surface of the bolt, install and place the crankshaft pulley and tighten the crankshaft pulley bolt to 80-87 ft. lbs. (110-120 Nm) on the GLC or tighten the crankshaft pulley bolt to 101-108 ft. lbs. (140-150 Nm) on the 626. Lastly, attach and tighten the drive belts and in the case of an all-electric motor, replace the radiator and refill the cooling system until it fills completely with water.