How to properly remove and reinstall Wiper Arm and Wiper Blades on Mazda B2000?

To take out the blade and arm, unscrew the retaining nut and prise out the blade and arm around the pivot shaft which is serrated so that you can adjust the wiper pattern on the glass. To position the arms back into the correct Park position, switch the wiper on and have the motor cycle three or four times, then switch off the wiper switch without switching on the ignition key to switch off the wiper motor. Such a move will position the wiper shafts at the appropriate Park position. Lastly, the blade and arm should be carefully fitted in place on the shaft and held by the retaining nut and the blades and arms must be aligned.

How to remove and install Wiper Arm and Wiper Blades on Mazda B2200?

To take the front wiper blade and arm off pickup and MPV models firstly take the cap off, unscrew the retaining nut and prise the blade and arm off the pivot shaft, which has a serrated edge to adjust the wiper pattern. In order to position the arms again in the correct Park position, switch on the wiper and make the motor cycle three or four times before switching off to position the wiper shafts properly. Clean the connector shafts of the wipers arm using wire brush and then put the blade and arm on the shaft and connect them with the retaining nut and caps in the position they are shown. In the Navajo models, you need to lift the blade end of the arm out of the windshield and then move the slide latch away off the pivot shaft to take out the arm and blade assembly with no tools. Installation requires one to insert the main head onto the pivot shaft and make sure that the wipers are stowed, the blade assembly is correctly in place, just push the main arm head to the pivot shaft head and raise the blade end and push the slide latch into the lock before lowering the blade to the windshield. In the case of the rear wiper in MPV, the retaining nut is unscrewed and the blade and arm detached off the pivot shaft, and then the arm returned to the correct Park position by cycling the wiper motor. Take the blade and arm and attach it to the shaft with the retaining nut and place them as shown. To apply to Navajo models, clean the car paint with a towel, pull the wiper blade/arm out of the car and put it in the position of service, unscrew the retaining clip at the bottom of the pivot arm using a small flat-bladed pry tool, and pull the wiper arm off of the shaft carefully. Installation: You must make sure that the wiper motor pivot shaft is set in the Park position before installing the wiper arm, place the wiper arm over the pivot shaft and push it onto the shaft until it clamps, then lower the wiper blade/arm against the windshield wiper arm stop, and make sure it fits in that position.

Genuine Mazda Wiper Arm

Windshield Wiper Arms

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

131 Wiper Arms found

View related parts
Mazda Wiper Arm Part Number: L206-67-421
$34.91 MSRP: $46.57
You Save: $11.66 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Wiper; Rear Arm
Fits the following Mazda Models:
- 3 | 2010-2013 | Mazdaspeed, S, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- CX-5 | 2013-2025 | 2.5 Carbon Turbo, 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Wiper Arm Part Number: VA45-67-421A
$46.13 MSRP: $61.51
You Save: $15.38 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Wiper; Rear Arm
Fits the following Mazda Models:
- CX-50 | 2023-2025 | 2.5 S, 2.5 Turbo, Hybrid Preferred, Hybrid Premium | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
View related parts
Mazda Wiper Arm Part Number: GHR1-67-321
$49.50 MSRP: $66.01
You Save: $16.51 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Wiper
- Position: Passenger Side
Fits the following Mazda Models:
- 6 | 2014-2017 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Wiper Arm Part Number: TD11-67-321
$68.88 MSRP: $91.86
You Save: $22.98 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Wiper-Driver Side; Front Arm
- Position: Driver Side
Fits the following Mazda Models:
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Wiper Arm Part Number: BCKN-67-421B
$15.51 MSRP: $20.68
You Save: $5.17 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Wiper; Rear Arm
- Replaces: BCKN-67-421A
Fits the following Mazda Models:
- 3 | 2019-2025 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- MX-30 EV | 2022-2023 | Base, Premium Plus | BATTERY EV (EV/BEV)
View related parts
Mazda Wiper Arm Part Number: DGH9-67-421A
$24.85 MSRP: $33.14
You Save: $8.29 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Wiper; Rear Arm
- Replaces: DGH9-67-421
Fits the following Mazda Models:
- CX-30 | 2020-2025 | 2.5 Carbon Turbo, 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Wiper Arm Part Number: TK48-67-421
$39.08 MSRP: $52.12
You Save: $13.04 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Wiper; Rear Arm
Fits the following Mazda Models:
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
View related parts
Mazda Wiper Arm Part Number: KN0W-67-321
$52.29 MSRP: $69.72
You Save: $17.43 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Wiper; Front Arm
- Position: Driver Side
- Replaces: KB7W-67-321
Fits the following Mazda Models:
- CX-5 | 2017-2025 | 2.5 Carbon Turbo, 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Wiper Arm Part Number: BN8G-67-321E
$85.98 MSRP: $114.65
You Save: $28.67 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Wiper; Front Arm
- Position: Passenger Side
- Replaces: BN8G-67-321B, BN8G-67-321C, BN8G-67-321A, BN8G-67-321, BN8G-67-321D
Fits the following Mazda Models:
- 3 | 2004-2009 | Mazdaspeed, S, SP23, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda Wiper Arm Part Number: BHN9-67-321
$44.64 MSRP: $59.52
You Save: $14.88 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Wiper; Front Arm
- Position: Driver Side
- Replaces: BJS7-67-321
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Wiper Arm Part Number: BJT6-67-421
$25.23 MSRP: $33.64
You Save: $8.41 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Wiper; Rear Arm
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Wiper Arm Part Number: EG21-67-421
$34.11 MSRP: $45.50
You Save: $11.39 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Wiper; Rear Arm
Fits the following Mazda Models:
- CX-7 | 2007-2012 | Grand Touring, SV, Sport, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Wiper Arm Part Number: ZZC1-67-421A
$44.14 MSRP: $58.86
You Save: $14.72 (26%)
ADD TO CART
Product Specifications
- Other Name: Arm, Wiper; Rear Arm
Fits the following Mazda Models:
- Tribute | 2008-2011 | Hybrid, S, i | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mazda Wiper Arm Part Number: BHS3-67-321
$45.28 MSRP: $60.38
You Save: $15.10 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Wiper; Front Arm
- Position: Passenger Side
- Replaces: BJS8-67-321
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Wiper Arm Part Number: KD35-67-321A
$64.29 MSRP: $85.74
You Save: $21.45 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Wiper; Front Arm
- Position: Driver Side
- Replaces: KD35-67-321
Fits the following Mazda Models:
- CX-5 | 2013-2016 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Wiper Arm Part Number: KD51-67-321A
$68.83 MSRP: $91.79
You Save: $22.96 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Wiper; Front Arm
- Position: Passenger Side
- Replaces: KD51-67-321
Fits the following Mazda Models:
- CX-5 | 2013-2016 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Wiper Arm Part Number: TD12-67-321
$87.63 MSRP: $116.86
You Save: $29.23 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Wiper-Passenger Side; Front Arm
- Position: Passenger Side
Fits the following Mazda Models:
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Wiper Arm Part Number: BBM4-67-321
$68.88 MSRP: $91.86
You Save: $22.98 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Wiper; Front Arm
- Position: Driver Side
Fits the following Mazda Models:
- 3 | 2010-2013 | Mazdaspeed, S, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Wiper Arm Part Number: BN8F-67-321F
$84.23 MSRP: $112.33
You Save: $28.10 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Wiper; Front Arm
- Position: Driver Side
- Replaces: BN8F-67-321E, BN8F-67-321D
Fits the following Mazda Models:
- 3 | 2004-2009 | Mazdaspeed, S, SP23, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda Arm Part Number: LD50-67-361
$6.35 MSRP: $35.43
You Save: $29.08 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm No.1, Link
- Position: Driver Side
Fits the following Mazda Models:
- MPV | 2002-2006 | ES, LX, LX-SV | 6 Cyl 3.0 L GAS

| Page 1 of 7 |Next >

1-20 of 131 Results

Mazda Wiper Arm

The Mazda Wiper Arm maintains clear visibility of the road ahead of every Mazda driver each time it rains by sweeping the windshield clean. It does so using a tough metal arm that transforms motor power into discreet back-and-forth movement, which then presses the rubber blade against the glass without scratching it. Mazda's cars are famous for their agile handling, sporty KODO styling, and efficient SKYACTIV powertrains. These deliver energetic performance alongside excellent fuel economy. In short, Mazda is fun and responsible, whether you are going to work through the week or playing at the weekend. The brand prides itself on its i-ACTIVSENSE driver aids, which monitor the surroundings. Further, there is the i-ACTIV all-wheel drive, which adapts to changes in terrain. Such mechanisms give confidence to the owner during bad weather. The Wiper Arm plays its part in enhancing safety by helping commuters to view the road properly. It works together with washer jets to wipe off mud, snow, dust and so on before that can settle. Made to specification for the standard wiper linkage applied throughout the range, this Wiper Arm attaches to the motor spindle securely, holds firm at highway speed, and applies even pressure across the blade so that water is pushed aside rather than smeared. Routine checks assist in ensuring it remains uncorroded and doesn't loosen up so that every Mazda cockpit can stay bright and unobstructed during any storm. An important detail that bolsters the brand's wider promise of reliability, innovation, and driving joy.

You'll get great performance and real durability when you pick genuine OEM Wiper Arm. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Wiper Arm Parts and Q&A

Wiper Arm
UB76-67-321
Q:
How to properly remove and reinstall Wiper Arm and Wiper Blades on Mazda B2000?
A:
To take out the blade and arm, unscrew the retaining nut and prise out the blade and arm around the pivot shaft which is serrated so that you can adjust the wiper pattern on the glass. To position the arms back into the correct Park position, switch the wiper on and have the motor cycle three or four times, then switch off the wiper switch without switching on the ignition key to switch off the wiper motor. Such a move will position the wiper shafts at the appropriate Park position. Lastly, the blade and arm should be carefully fitted in place on the shaft and held by the retaining nut and the blades and arms must be aligned.
Wiper Arm
UB39-67-321B
Q:
How to remove and install Wiper Arm and Wiper Blades on Mazda B2200?
A:
To take the front wiper blade and arm off pickup and MPV models firstly take the cap off, unscrew the retaining nut and prise the blade and arm off the pivot shaft, which has a serrated edge to adjust the wiper pattern. In order to position the arms again in the correct Park position, switch on the wiper and make the motor cycle three or four times before switching off to position the wiper shafts properly. Clean the connector shafts of the wipers arm using wire brush and then put the blade and arm on the shaft and connect them with the retaining nut and caps in the position they are shown. In the Navajo models, you need to lift the blade end of the arm out of the windshield and then move the slide latch away off the pivot shaft to take out the arm and blade assembly with no tools. Installation requires one to insert the main head onto the pivot shaft and make sure that the wipers are stowed, the blade assembly is correctly in place, just push the main arm head to the pivot shaft head and raise the blade end and push the slide latch into the lock before lowering the blade to the windshield. In the case of the rear wiper in MPV, the retaining nut is unscrewed and the blade and arm detached off the pivot shaft, and then the arm returned to the correct Park position by cycling the wiper motor. Take the blade and arm and attach it to the shaft with the retaining nut and place them as shown. To apply to Navajo models, clean the car paint with a towel, pull the wiper blade/arm out of the car and put it in the position of service, unscrew the retaining clip at the bottom of the pivot arm using a small flat-bladed pry tool, and pull the wiper arm off of the shaft carefully. Installation: You must make sure that the wiper motor pivot shaft is set in the Park position before installing the wiper arm, place the wiper arm over the pivot shaft and push it onto the shaft until it clamps, then lower the wiper blade/arm against the windshield wiper arm stop, and make sure it fits in that position.