How to disconnect and remove the wiper motor,Windshield Washer Fluid Reservoir and Windshield Washer Nozzle on Mazda Tribute?

Unplug the negative device battery. To access the wiper motor windscreen, detach the nut that secures the wiper arm. Afterwards, use paint to mark the position of the shafts to the wiper arms. Lastly, remove the wipers arms. In the event of a jam, utilize a miniature puller. To remove windshield wiper motor/linkage assembly, first disconnect the wiper motor harness connector, remove the cowl cover and remove the mounting bolts. To remove the motor assembly from the cowl area, lift it up and mark the position of the motor arm to the shaft. Remove linkage, arm and mounting bolts to detach the motor from the bracket. The installation consists of the removal steps done in the reverse order with the markings made correctly aligned. When battery is reconnected, Powertrain Control Module must relearn idle and fuel trim strategy for optimal efficiency and performance. For models after 2013, unbolt the bolts on the motor assembly and lift it so the electrical connection breaks. Remove the motor assembly afterwards. To access the rear window wiper motor, remove the rear window wiper arm, its protective cover and nut. After, open the liftgate to remove the motor's plastic cover. To take out the rear window wiper motor, disconnect the electrical connector, remove mounting nut and bolt(s). The installation process is simply the reverse of the removal procedure. The battery must be reconnected, and the Powertrain Control Module must relearn idle and fuel trim strategy. To access the windshield washer nozzles, you should first locate and remove the fasteners holding the insulation in the hood. Then, remove the hose on the nozzle and press on the outer tabs to remove the nozzle. The process of installation is reverse to that of removal. To remove the washer pump motor, unbolt the passenger's side inner fender splash shield, drain the washer bottle, disconnect the electrical connectors and hoses, tip pump motor out then pull up. The process of installation is opposite to removal. To access the washer fluid reservoir, you will need to take off the passenger's side inner fender splash shield. From there, you can drain the washer bottle, disconnect electrical and hose connections, remove the plastic retainer and take out the mounting bolts. Finally pull the washer bottle through the passenger's side wheel well. Installation process is just the reverse of the removal process.

Genuine Mazda Windshield Washer Nozzle

Front Windshield Washer Nozzle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

125 Windshield Washer Nozzles found

View related parts
Mazda Washer Nozzle Part Number: KD53-67-510
$11.09 MSRP: $14.78
You Save: $3.69 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle, Washer
- Position: Passenger Side
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2014-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-5 | 2013-2025 | 2.5 Carbon Turbo, 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Washer Nozzle Part Number: KD45-67-510
$11.09 MSRP: $14.78
You Save: $3.69 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle, Washer
- Position: Driver Side
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2014-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-5 | 2013-2025 | 2.5 Carbon Turbo, 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Washer Nozzle Part Number: BP4L-67-510
$17.90 MSRP: $23.88
You Save: $5.98 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle, Washer
Fits the following Mazda Models:
- 3 | 2004-2009 | Mazdaspeed, S, SP23, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda Washer Nozzle Part Number: BP4K-67-510
$17.90 MSRP: $23.88
You Save: $5.98 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle, Washer
- Position: Driver Side
Fits the following Mazda Models:
- 3 | 2004-2009 | S, SP23, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda Washer Hose Connector Part Number: D10C-67-502
$0.93 MSRP: $1.24
You Save: $0.31 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Hose
Fits the following Mazda Models:
- 3 | 2020-2025 | 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.5 L GAS
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
- CX-70 | 2025 | PHEV, Turbo, Turbo S | 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.3 L MILD HYBRID EV-GAS (MHEV)
- CX-90 | 2024-2025 | PHEV, Turbo, Turbo S | 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.3 L MILD HYBRID EV-GAS (MHEV)
View More
View related parts
Mazda Washer Hose Part Number: BCKP-67-501
$5.26 MSRP: $7.02
You Save: $1.76 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Washer; Washer Nozzle Elbow
Fits the following Mazda Models:
- 3 | 2019-2025 | 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.5 L GAS
View related parts
Mazda Nozzle Part Number: LC63-67-510A
$5.89 MSRP: $7.86
You Save: $1.97 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle, Washer-Front
- Position: Passenger Side
Fits the following Mazda Models:
- MPV | 2000-2003 | DX, ES, LX | 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Nozzle Part Number: BJ0E-67-510C
$7.74 MSRP: $10.32
You Save: $2.58 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle, Washer-Front; Washer Nozzle
- Position: Driver Side
- Replaces: BJ0E-67-510, BJ0E-67-510A, BJ0E-67-510B
Fits the following Mazda Models:
- Protege | 1999-2003 | DX, ES, LX, Mazdaspeed | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Protege5 | 2002-2003 | Base | 4 Cyl 2.0 L GAS
View related parts
Mazda Washer Nozzle Part Number: NE51-67-510
$7.80 MSRP: $10.40
You Save: $2.60 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle, Washer-Front Window
Fits the following Mazda Models:
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, SV, Special Edition, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Washer Nozzle Part Number: L206-67-510
$7.80 MSRP: $10.40
You Save: $2.60 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle, Washer; Windshield Hood Nozzle
Fits the following Mazda Models:
- 3 | 2007-2009 | Mazdaspeed | 4 Cyl 2.3 L GAS
- CX-7 | 2007-2012 | Grand Touring, SV, Sport, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View More
View related parts
Mazda Washer Nozzle Part Number: GS3L-67-510
$8.15 MSRP: $10.87
You Save: $2.72 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle, Washer
Fits the following Mazda Models:
- 6 | 2009-2013 | S, i | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Nozzle Part Number: BJ0F-67-510B
$8.35 MSRP: $11.14
You Save: $2.79 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle, Washer-Front Window; Washer Nozzle
- Position: Passenger Side
- Replaces: BJ0F-67-510A, BJ0F-67-510
Fits the following Mazda Models:
- Protege | 1999-2003 | DX, ES, LX, Mazdaspeed | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Protege5 | 2002-2003 | Base | 4 Cyl 2.0 L GAS
View related parts
Mazda Washer Nozzle Part Number: NA1P-67-510
$8.99 MSRP: $11.99
You Save: $3.00 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle, Washer
- Position: Passenger Side
Fits the following Mazda Models:
- MX-5 Miata | 2016-2025 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Washer Nozzle Part Number: NA9C-67-510
$9.03 MSRP: $12.04
You Save: $3.01 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle, Washer
- Position: Driver Side
Fits the following Mazda Models:
- MX-5 Miata | 2016-2025 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Washer Nozzle Part Number: BCKN-67-510
$10.08 MSRP: $13.44
You Save: $3.36 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle, Washer
Fits the following Mazda Models:
- 3 | 2019-2025 | 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.5 L GAS
- MX-30 EV | 2022-2023 | Base, Premium Plus | BATTERY EV (EV/BEV)
View related parts
Mazda Washer Nozzle Part Number: D10B-67-510A
$10.15 MSRP: $13.54
You Save: $3.39 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle(Left), Washer
- Position: Passenger Side
- Replaces: D10B-67-510
Fits the following Mazda Models:
- CX-3 | 2016-2017 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Washer Nozzle Part Number: D09W-67-510A
$10.15 MSRP: $13.54
You Save: $3.39 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle(Right), Washer
- Position: Driver Side
- Replaces: D09W-67-510
Fits the following Mazda Models:
- CX-3 | 2016-2017 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Washer Nozzle Part Number: DG1F-67-510
$10.23 MSRP: $13.64
You Save: $3.41 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle, Right Washer
- Position: Passenger Side
Fits the following Mazda Models:
- CX-3 | 2018-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Washer Nozzle Part Number: DD2F-67-510
$10.23 MSRP: $13.64
You Save: $3.41 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle(Left), Washer
- Position: Driver Side
Fits the following Mazda Models:
- CX-3 | 2018-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Washer Nozzle Part Number: BJS7-67-50YA
$11.45 MSRP: $15.27
You Save: $3.82 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle(Right), Washer
- Position: Passenger Side
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS

| Page 1 of 7 |Next >

1-20 of 125 Results

Mazda Windshield Washer Nozzle

The Windshield Washer Nozzle sprays liquid onto the windshield to help clear dirt and grime to assist the wipers. It's a small but ingenious device that helps the driver get a clear view in all kinds of weather. It's just one example of the thoughtful engineering that goes into all Mazda vehicles. The brand has become well-known for a range of cars offering impressive handling married to practicality. All of this can be traced back to early rotary cars and turbo-charged revolutionaries and remains true for current SKYACTIV powertrains maximizing distances for every drop of fuel. Mazda KODO design language gives a sculptural shape on creations that appear alive even when it is stationary. Moreover, the intelligent i-ACTIVSENSE technologies support the driving effort. Inside, balanced cabins locate controls exactly where hands expect them, and available all-wheel drive transfers torque smoothly on twisting roads, proof that Mazda builds vehicles meant to engage their drivers while still providing everyday comfort and security. Similar to when that larger feature strengthens the drive, it is not only all Mazda models that benefit from the Windshield Washer Nozzle. The Mazda Windshield Washer Nozzle is designed to be connected to a compact electric pump and some sturdy hoses. It essentially channels the pressurized fluid through little tubes that will create a fine mist on the windscreen. This spray will remove mud, bugs, or salt before the wipers swipe on the windshield. As the outlet ports are molded for precision, the spray falls at the right angle to prevent streaks and glare that can take the teen or adult driver's eye off the road. If spray dulls or drifts, you can quickly swap out the Windshield Washer Nozzle for sharp visibility that keeps every Mazda ready for the next adventure.

You'll get great performance and real durability when you pick genuine OEM Windshield Washer Nozzle. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Windshield Washer Nozzle Parts and Q&A

Washer Nozzle
EC01-67-50YA
Q:
How to disconnect and remove the wiper motor,Windshield Washer Fluid Reservoir and Windshield Washer Nozzle on Mazda Tribute?
A:
Unplug the negative device battery. To access the wiper motor windscreen, detach the nut that secures the wiper arm. Afterwards, use paint to mark the position of the shafts to the wiper arms. Lastly, remove the wipers arms. In the event of a jam, utilize a miniature puller. To remove windshield wiper motor/linkage assembly, first disconnect the wiper motor harness connector, remove the cowl cover and remove the mounting bolts. To remove the motor assembly from the cowl area, lift it up and mark the position of the motor arm to the shaft. Remove linkage, arm and mounting bolts to detach the motor from the bracket. The installation consists of the removal steps done in the reverse order with the markings made correctly aligned. When battery is reconnected, Powertrain Control Module must relearn idle and fuel trim strategy for optimal efficiency and performance. For models after 2013, unbolt the bolts on the motor assembly and lift it so the electrical connection breaks. Remove the motor assembly afterwards. To access the rear window wiper motor, remove the rear window wiper arm, its protective cover and nut. After, open the liftgate to remove the motor's plastic cover. To take out the rear window wiper motor, disconnect the electrical connector, remove mounting nut and bolt(s). The installation process is simply the reverse of the removal procedure. The battery must be reconnected, and the Powertrain Control Module must relearn idle and fuel trim strategy. To access the windshield washer nozzles, you should first locate and remove the fasteners holding the insulation in the hood. Then, remove the hose on the nozzle and press on the outer tabs to remove the nozzle. The process of installation is reverse to that of removal. To remove the washer pump motor, unbolt the passenger's side inner fender splash shield, drain the washer bottle, disconnect the electrical connectors and hoses, tip pump motor out then pull up. The process of installation is opposite to removal. To access the washer fluid reservoir, you will need to take off the passenger's side inner fender splash shield. From there, you can drain the washer bottle, disconnect electrical and hose connections, remove the plastic retainer and take out the mounting bolts. Finally pull the washer bottle through the passenger's side wheel well. Installation process is just the reverse of the removal process.