How to use Lift Support to remove and install the liftgate strut on Mazda MPV?

Open the liftgate and support it. Use a small screwdriver to carefully pry the small circlip off the hinge pin and force the pin out of the hinge. Detach the lower end of the strut from the body using an open end wrench, ensuring to carefully remove the pivot assembly from the body of the liftgate doorjamb. Installation is the reverse of removal.

How can Lift Support be used to support the rear hatch while replacing the struts on Mazda Protege?

The hatch at the back is bulky and not an easy task to carry around and keep safe during the process of replacing the struts and hence at least two individuals are required to do the exercise. Start with opening the hatch to the fullest and holding it open. Then take the strut bolts out and disassemble the strut out of the hatch and the body. Lastly, the reverse steps followed on the removal process are followed during the installation.

Genuine Mazda Lift Support

Lift Support Shocks

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

90 Lift Supports found

View related parts
Mazda Lift Cylinder Part Number: VA40-56-660
$10.24 MSRP: $13.65
You Save: $3.41 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay(Right), Damper-Bonnet; Lift Cylinder
- Position: Right
Fits the following Mazda Models:
- CX-50 | 2023-2024 | 2.5 S, 2.5 Turbo | 4 Cyl 2.5 L GAS
View related parts
Mazda Lift Cylinder Part Number: VA40-56-670
$10.24 MSRP: $13.65
You Save: $3.41 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay(Left), Damper-Bonnet; Lift Cylinder
- Position: Left
Fits the following Mazda Models:
- CX-50 | 2023-2024 | 2.5 S, 2.5 Turbo | 4 Cyl 2.5 L GAS
View related parts
Mazda Strut Part Number: GM9E-62-620C
$17.93 MSRP: $23.90
You Save: $5.97 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay(Right), Damper; Strut
- Position: Right
- Replaces: GM9E-62-620B, GM9E-62-620A, GM9E-62-620
Fits the following Mazda Models:
- 6 | 2004-2007 | i, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Strut Part Number: GM9E-63-620C
$17.93 MSRP: $23.90
You Save: $5.97 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay(Left), Damper; Strut
- Position: Left
- Replaces: GM9E-63-620B, GM9E-63-620, GM9E-63-620A
Fits the following Mazda Models:
- 6 | 2004-2007 | i, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Lift Cylinder Part Number: GS3L-56-930
$22.56 MSRP: $30.09
You Save: $7.53 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper, Stay-Trunk Lid; Lift Cylinder
Fits the following Mazda Models:
- 6 | 2009-2013 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Strut Part Number: GM9A-62-620D
$21.44 MSRP: $28.59
You Save: $7.15 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay(Right), Damper; Strut
- Position: Right
- Replaces: GM9A-62-620, GM9A-62-620B, GM9A-62-620A, GM9A-62-620C
Fits the following Mazda Models:
- 6 | 2004-2008 | i, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Strut Part Number: GM9A-63-620D
$21.44 MSRP: $28.59
You Save: $7.15 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay(Left), Damper; Strut
- Position: Left
- Replaces: GM9A-63-620A, GM9A-63-620C, GM9A-63-620B, GM9A-63-620
Fits the following Mazda Models:
- 6 | 2004-2008 | i, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Strut Part Number: GM9B-63-620D
$21.44 MSRP: $28.59
You Save: $7.15 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay(Left), Damper; Strut
- Position: Left
- Replaces: GM9B-63-620B, GM9B-63-620A, GM9B-63-620C, GM9B-63-620
Fits the following Mazda Models:
- 6 | 2004-2008 | i, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Strut Part Number: N248-56-930
$24.55 MSRP: $32.74
You Save: $8.19 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper, Stay-Trunk Lid; Strut
Fits the following Mazda Models:
- MX-5 Miata | 2017-2023 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Strut Part Number: N243-56-930A
$25.94 MSRP: $34.60
You Save: $8.66 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper, Stay-Trunk Lid; Lift Cylinder, Strut
- Replaces: N243-56-930
Fits the following Mazda Models:
- MX-5 Miata | 2016-2023 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Strut Part Number: NF79-56-930C
$30.28 MSRP: $40.37
You Save: $10.09 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper, Stay-Trunk Lid; Strut
- Replaces: NF79-56-930, NF79-56-930B
Fits the following Mazda Models:
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Strut Part Number: FE15-56-930C
$30.46 MSRP: $40.63
You Save: $10.17 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper, Stay-Trunk Lid; Strut
- Replaces: FE15-56-930A, FE15-56-930
Fits the following Mazda Models:
- RX-8 | 2004-2011 | 40th Anniversary Edition, Base, Grand Touring, R3, Shinka, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Lift Cylinder Part Number: BN8V-56-930B
$34.23 MSRP: $45.64
You Save: $11.41 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper, Stay-Trunk Lid
- Replaces: BN8V-56-930, BN8V-56-930A
Fits the following Mazda Models:
- 3 | 2004-2009 | i, S, SP23 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda Strut Part Number: NE52-56-930
$34.46 MSRP: $45.95
You Save: $11.49 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper, Stay-Trunk Lid; Strut
Fits the following Mazda Models:
- MX-5 Miata | 2007-2015 | 25th Anniversary Edition, Club, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Lift Cylinder Part Number: BBP3-56-930A
$34.43 MSRP: $45.91
You Save: $11.48 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper, Stay-Trunk Lid
- Replaces: BBP3-56-930
Fits the following Mazda Models:
- 3 | 2010-2013 | i, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Lift Cylinder Part Number: BDMT-63-620
$39.73 MSRP: $52.98
You Save: $13.25 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay(Left), Damper; Lift Cylinder
- Position: Left
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.5 L GAS
View related parts
Mazda Lift Cylinder Part Number: D651-63-620A
$41.30 MSRP: $55.07
You Save: $13.77 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay(Left), Damper
- Position: Left
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Lift Cylinder Part Number: DFR5-63-620A
$45.11 MSRP: $60.16
You Save: $15.05 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay(Left), Damper; Lift Cylinder, Support Strut
- Position: Left
Fits the following Mazda Models:
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Lift Cylinder Part Number: BP4K-62-620F
$45.98 MSRP: $61.31
You Save: $15.33 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay(Right), Damper
- Position: Right
- Replaces: BP4K-62-620A, BP4K-62-620D, BP4K-62-620B
Fits the following Mazda Models:
- 3 | 2004-2009 | Mazdaspeed, S, SP23 | 4 Cyl 2.3 L GAS
View related parts
Mazda Lift Cylinder Part Number: BP4K-63-620F
$45.98 MSRP: $61.31
You Save: $15.33 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay(Left), Damper
- Position: Left
- Replaces: BP4K-63-620B, BP4K-63-620D, BP4K-63-620C, BP4K-63-620A
Fits the following Mazda Models:
- 3 | 2004-2009 | Mazdaspeed, S, SP23 | 4 Cyl 2.3 L GAS

| Page 1 of 5 |Next >

1-20 of 90 Results

Mazda Lift Support

Every part of the car is important. Your vehicle's performance will be compromised if something goes wrong with the Mazda Lift Support. Therefore, for your smooth driving and safety, you need regular checks and timely replacements. Whenever you need replacements, opt for genuine Mazda Lift Supports. Because they meet the manufacturer's criteria, it guarantees that replacements fit perfectly. Thus, these make better choices for people who care about driving. Why should you shop at MazdaPartsNow.com? We sell genuine Mazda Lift Supports. In our online catalog, there is a wide range of different parts. These are delivered directly from authorized Mazda dealers only so that customers can be sure of their security throughout any transaction while using our website. Furthermore, you can also quickly search for OEM parts you want because of our user-friendly site navigation. Choose us for a genuine Mazda Lift Support that keeps your car running like new.

Mazda Lift Support Parts and Q&A

Lift Cylinder
8BL2-62-620
Q: How to use Lift Support to remove and install the liftgate strut on Mazda MPV?
A:
Open the liftgate and support it. Use a small screwdriver to carefully pry the small circlip off the hinge pin and force the pin out of the hinge. Detach the lower end of the strut from the body using an open end wrench, ensuring to carefully remove the pivot assembly from the body of the liftgate doorjamb. Installation is the reverse of removal.
Lift Cylinder
B25R-63-620C
Q: How can Lift Support be used to support the rear hatch while replacing the struts on Mazda Protege?
A:
The hatch at the back is bulky and not an easy task to carry around and keep safe during the process of replacing the struts and hence at least two individuals are required to do the exercise. Start with opening the hatch to the fullest and holding it open. Then take the strut bolts out and disassemble the strut out of the hatch and the body. Lastly, the reverse steps followed on the removal process are followed during the installation.