1990 Mazda 323 Sway Bar Link, Sway Bar Bracket, Sway Bar Bushing, Sway Bars

Sway Bar Bushing, Sway Bars Installation and Repair Tips for 1990 Mazda 323

• Q:

  How to remove and reinstall the front sway bars and front sway bar bushing on 1990 Mazda 323?

  A:

  Loosen lug nuts, raise and support the vehicle, remove front wheels and engine undercover. Remove the Sway Bars link (location varies by model). Pull steering gear forward, support the engine, remove support cross member, disconnect tie rods, lower ball joints and exhaust. Unbolt bar brackets, inspect/replace bushings, clean and reinstall.
• Q:

  How to properly remove and install the rear sway bars and rear sway bar bushing on 1990 Mazda 323?

  A:

  Unscrew the lug nuts on the rear wheel, lift the vehicle, and place it on jackstands and then remove the rear wheels. Unscrew the Sway Bars link nut and other parts and put them back later. Check and change bushings as required, wipe the bar positions and grease them with rubber oil prior to installation. Lastly, assemble and screw the parts in the right order.