2006 Mazda Tribute Evaporator, A/C Compressor, A/C Condenser

A/C Compressor, A/C Condenser Installation and Repair Tips for 2006 Mazda Tribute

• Q:

  What steps should be followed when replacing an A/C Compressor in an air conditioning system on 2006 Mazda Tribute?

  A:

  Make sure to change the accumulator or receiver/drier and orifice tube or TXV valve when changing the A/C Compressor. Turn off air conditioning system and then disconnect right front wheel and fender splash shield. Before installing, disconnect electrical connectors, remove the A/C Compressor and check on oil levels. Change O-rings and test the system.
• Q:

  Should the A/C Condenser be replaced if the accumulator was damaged on 2006 Mazda Tribute?

  A:

  Replace the accumulator if the A/C condenser was damaged. Discharge the air conditioning system at a service department. Remove the front bumper cover and disconnect refrigerant lines. For newer models, remove the cooling module and radiator. Reinstall by lubricating fittings and have the system evacuated and leak tested.