What precautions should be taken when handling Brake Light Switches to avoid damage on 2008 Mazda Tribute?

Before dismantling the switch or attaching it, make sure the brake pedal is in its rest position or it may be damaged. In models that were 2006 and below, disconnect the wiring, then turn clockwise the switch, to pull out, and then install counterclockwise with the pedal depressed. In the 2007 and subsequent models, delete wiring and switch, invert to install.

Genuine 2008 Mazda Tribute Brake Light Switches

Stop Light Switches

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Light Switches found

View related parts
2008 Mazda Tribute Parking Brake Warning Switch Part Number: ZZC0-66-840A
$28.83 MSRP: $38.44
You Save: $9.61 (25%)
ADD TO CART
Product Specifications
- Other Name: Switch, Lamp
- Replaces: ZZC0-66-840
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: ZZC0-66-840A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2008 Mazda Tribute Submodels:
- Hybrid, i, S | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2008 Mazda Tribute Stoplamp Switch Part Number: ZZCA-67-210
$25.39 MSRP: $33.86
You Save: $8.47 (26%)
ADD TO CART
Product Specifications
- Other Name: Switch, Stop Lamp
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: ZZCA-67-210
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 2008 Mazda Tribute Submodels:
- Hybrid, i, S | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2008 Mazda Tribute Brake Light Switches Parts and Q&A

Q: What precautions should be taken when handling Brake Light Switches to avoid damage on 2008 Mazda Tribute?
A: Before dismantling the switch or attaching it, make sure the brake pedal is in its rest position or it may be damaged. In models that were 2006 and below, disconnect the wiring, then turn clockwise the switch, to pull out, and then install counterclockwise with the pedal depressed. In the 2007 and subsequent models, delete wiring and switch, invert to install.