How to remove and install the steering knuckle and wheel hub on 2008 Mazda Tribute?

Loosen lug nuts, raise and support vehicle, loosen driveaxle hub nut, remove caliper (hang by wire), brake disc, disconnect brake hose or ABS sensor if equipped. Follow model-specific strut/knuckle, tie-rod and balljoint separations; guide and reinstall knuckle/hub, reassemble brakes, reinstall wheel, and check front-end alignment.

Genuine 2008 Mazda Tribute Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2008 Mazda Tribute Knuckle Part Number: EF91-33-021
$93.64 MSRP: $124.87
You Save: $31.23 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle(Right), Steering
- Position: Right
- Item Weight: 11.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: EF91-33-021
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2008 Mazda Tribute Submodels:
- Hybrid, i, S | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2008 Mazda Tribute Knuckle Part Number: EF91-33-031
Product Specifications
- Other Name: Knuckle(Left), Steering
- Position: Left
- Item Weight: 11.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: EF91-33-031
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2008 Mazda Tribute Submodels:
- Hybrid, i, S | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2008 Mazda Tribute Steering Knuckle Parts and Q&A

Q: How to remove and install the steering knuckle and wheel hub on 2008 Mazda Tribute?
A: Loosen lug nuts, raise and support vehicle, loosen driveaxle hub nut, remove caliper (hang by wire), brake disc, disconnect brake hose or ABS sensor if equipped. Follow model-specific strut/knuckle, tie-rod and balljoint separations; guide and reinstall knuckle/hub, reassemble brakes, reinstall wheel, and check front-end alignment.