How to replace a Rack and Pinion Boot on 2010 Mazda 3?

Loosen lug nuts, raise vehicle, support on stands. Remove wheel and shields. Detach tie-rod end, jam nut; cut off boot clamp and slide off rack and pinion boot. Wrap steering-rod threads, slide new boot onto gear, install clamps, remove tape, reinstall tie-rod end and wheel, lower vehicle, tighten lug nuts to specified torque.

Genuine 2010 Mazda 3 Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Rack and Pinion Boots found

View related parts
2010 Mazda 3 Boot Part Number: BP4L-32-125
$23.33 MSRP: $31.11
You Save: $7.78 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Rack; Boot
- Replaces: BBM4-32-12X, BP4L-32-12X
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BP4L-32-125
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2010 Mazda 3 Submodels:
- i, Mazdaspeed, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
2010 Mazda 3 Boot Part Number: BP4L-32-12X
$23.33 MSRP: $31.11
You Save: $7.78 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot & Clamps-Steering Gear; Tie Rod Boot
- Replaced by: BP4L-32-125
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BP4L-32-12X
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2010 Mazda 3 Submodels:
- i, Mazdaspeed, S, SP23 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
2010 Mazda 3 Dust Cover Part Number: BBM4-32-112
$116.05 MSRP: $154.76
You Save: $38.71 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Dust
- Replaces: CC29-32-112B, CC29-32-112C, CC29-32-112A, BP4L-32-112
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BBM4-32-112
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2010 Mazda 3 Submodels:
- i, Mazdaspeed, S, SP23 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS

2010 Mazda 3 Rack and Pinion Boot Parts and Q&A

Q: How to replace a Rack and Pinion Boot on 2010 Mazda 3?
A: Loosen lug nuts, raise vehicle, support on stands. Remove wheel and shields. Detach tie-rod end, jam nut; cut off boot clamp and slide off rack and pinion boot. Wrap steering-rod threads, slide new boot onto gear, install clamps, remove tape, reinstall tie-rod end and wheel, lower vehicle, tighten lug nuts to specified torque.