How to remove the front and rear bumper cover on Mazda 3?

Unplug the cable on the negative battery terminal. Relax the front wheel lug nut, lift the car and hold it firmly on jackstands then detach the front wheels. Take out the splash shield mounting fasteners and remove the splash shield(s). In the case of the front bumper cover, you have to first detach the upper mounting fasteners of the radiator support, followed by the bottom splash shield and radiator support splash shield. Then unfasten the fender splash shields and inner fender to the bumper cover, unplug the electrical connectors in the fog lamps (where present) and the inner fenderwell back to release the bumper cover-to-fender mounting fastener. The fender has three mounting fasteners on its edge on 2010 and subsequent models. First of all, unplug the bumper cover mounting tabs in the upper rear edges to the lower edge slots in the front fenders, by pulling the bumper cover outwards, beginning at the fender side and pulling towards the center. Check with a final look with a flashlight to see that the bumper cover is thoroughly uncovered, all the electrical connectors are uncomingled and all the wiring harnesses are clear of the area. Installation is the opposite of removal with the help of removing the front bumper cover. In the case of the rear bumper cover, firstly, take out the taillight housing assemblies, lift the rear part of the vehicle and put it on jackstands. Take off the mounting fasteners of the rear of the wheel wells, then in the taillight area, take off the pin-type fastener and bolt on each upper corner of the rear bumper cover then the mounting fasteners of the underside of the rear bumper cover. Once more, do a final check with a flashlight to make sure that the bumper cover is fully removed, all of the electrical connections are loose and that all of the wiring harnesses were safely clear. Installation can be done in the same direction as removal with some help, except that, when replacing the bumper cover, you must have help attaching the cover to the vehicle against falling.

Genuine Mazda 3 Bumper Cover

Bumper Shell

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

44 Bumper Covers found

View related parts
Mazda 3 Bumper Cover Part Number: B37F-50-031D-BB
$540.39 MSRP: $726.48
You Save: $186.09 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Replaces: B37F-50-031D-AA, B37F-50-031A-AA, B37F-50-031C-AA
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2007-2009 Mazda 3 | Mazdaspeed | 4 Cyl 2.3 L GAS
View related parts
Mazda 3 Bumper Cover Part Number: BJS7-50-031A-9U
$378.16 MSRP: $508.39
You Save: $130.23 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Replaces: BJS7-50-031A-BB, BHN1-50-031A-BB, BHN1-50-031B-BB, BJS7-50-031-BB
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2016 Mazda 3 | I Sport, I Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Lower Cover Part Number: BCW8-50-101A
$15.98 MSRP: $21.30
You Save: $5.32 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover(Right), Front Bumper
- Position: Passenger Side
- Replaces: BCW8-50-101
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2010 Mazda 3 | i | 4 Cyl 2.0 L GAS
View related parts
Mazda 3 Bumper Cover Part Number: BJT6-50-221A-9U
$286.16 MSRP: $381.63
You Save: $95.47 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear
- Replaces: BFYH-50-221, BHN9-50-221B-BB, BJT6-50-221-BB, BJT6-50-221A-BB, BHN9-50-221A-BB
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2016 Mazda 3 | I Sport, I Touring, i Grand Touring, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bumper Cover Part Number: BDTS-50-031E-BB
$424.32 MSRP: $570.44
You Save: $146.12 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Replaces: BCKA-50-031E-BB, BCKB-50-031E-BB, BDTS-50-031D-BB, BCKB-50-031-BB, BCKA-50-031A-BB, BCKB-50-031D-BB, BCKA-50-031-BB, BDTS-50-031-BB
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2019-2025 Mazda 3 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bumper Cover Part Number: BDTS-50-221B-BB
$488.03 MSRP: $656.08
You Save: $168.05 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear
- Replaces: BCKA-50-221-BB, BCKA-50-221A-BB, BDTS-50-221-BB, BDTS-50-221A-BB, BCKB-50-221A-BB, BCKB-50-221-BB
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2019-2025 Mazda 3 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Lower Cover Part Number: BCKR-50-222B
$298.10 MSRP: $397.55
You Save: $99.45 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear Lower
- Position: Lower
- Replaces: BCKR-50-222A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2019-2025 Mazda 3 | 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Lower Cover Part Number: BCKN-50-222B
$298.10 MSRP: $397.55
You Save: $99.45 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear Lower
- Position: Lower
- Replaces: BCKN-50-222A, BCKN-50-222
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2019-2025 Mazda 3 | 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bumper Cover Part Number: BNYP-50-03XE-BB
$363.25 MSRP: $484.43
You Save: $121.18 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Replaces: B3YD-50-03XA-AA, BNYP-50-03XE, BNYP-50-03XC, BNYP-50-03XD, BNYP-50-03XA
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2004-2006 Mazda 3 | S, SP23, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda 3 Bumper Cover Part Number: BCW7-50-221J-BB
$409.14 MSRP: $550.02
You Save: $140.88 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear
- Replaces: BCW7-50-221J
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2012-2013 Mazda 3 | S, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bumper Cover Part Number: B0S1-50-221-BB
$582.07 MSRP: $782.51
You Save: $200.44 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2022-2025 Mazda 3 | 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bumper Cover Part Number: BBN9-50-221G-BB
$329.40 MSRP: $439.28
You Save: $109.88 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear
- Replaces: BBN9-50-221G-AA, BBN9-50-221F-AA, BBN9-50-221G, BBN9-50-221F, BBN9-50-221A-AA
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2010-2013 Mazda 3 | Mazdaspeed, S | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bumper Cover Part Number: BCKN-50-031D-BB
$454.45 MSRP: $610.93
You Save: $156.48 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Replaces: BCKN-50-031A-BB, BCKN-50-031-BB, BCKP-50-031D-BB, BCKP-50-031A-BB
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2019-2025 Mazda 3 | 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bumper Cover Part Number: BANE-50-031A-9U
$283.39 MSRP: $377.92
You Save: $94.53 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Replaces: BANE-50-031-BB, B63B-50-031B-BB, BANE-50-031A-BB, B63B-50-031-BB
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2017-2018 Mazda 3 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bumper Cover Part Number: BNYK-50-03XE-BB
$292.54 MSRP: $390.13
You Save: $97.59 (26%)
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2004-2006 Mazda 3 | S, SP23, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda 3 Bumper Cover Part Number: BAP1-50-031C-BB
$559.35 MSRP: $751.97
You Save: $192.62 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Replaces: BAP1-50-031C-AA, BAP1-50-031B-AA
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2007-2009 Mazda 3 | S, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda 3 Luggage Cover Bumper Part Number: BCKD-68-318
$3.69 MSRP: $4.92
You Save: $1.23 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber, Cushion; Cargo Cover Cushion
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2019-2025 Mazda 3 | 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Lower Cover Part Number: BBN2-50-102B
$15.99 MSRP: $21.32
You Save: $5.33 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover(Left), Front Bumper
- Position: Driver Side
- Replaces: BBN2-50-102A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mazda 3 | S, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Lower Cover Part Number: BBN2-50-101B
$15.99 MSRP: $21.32
You Save: $5.33 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover(Right), Front Bumper
- Position: Passenger Side
- Replaces: BBN2-50-101A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mazda 3 | S, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Lower Cover Part Number: BBN6-50-1T2C
$31.71 MSRP: $42.28
You Save: $10.57 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mesh No.2, Front Bumper
- Position: Lower
- Replaces: BBN6-50-1T2B
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2010-2013 Mazda 3 | Mazdaspeed | 4 Cyl 2.3 L GAS

| Page 1 of 3 |Next >

1-20 of 44 Results

Mazda 3 Bumper Cover

The Mazda 3 Bumper Cover is a soft surface that covers the bumper underneath. It gives the car a finished appearance. It also lets air flow that can help with speed and fuel economy. The cover is arranged for fitment at the front or rear of the vehicle and formed as part of a multi-piece assembly including the grille inserts, light bezels, tow eye hook caps, and decorative trim but is itself the visible surface likely to receive scuffs or minor collision damage. By concealing structural elements and an anchor point for a recovery hook, it ensures a clean appearance while protecting mechanical components from direct road debris strikes. The construction of an opening in the panel enables air to reach the radiator or other heat exchangers. Additional cavities can be created for fog lights, parking lamps, or turn signals. Where a Mazda 3 is not fitted with those components, the voids are plugged using matching covers so that the outer skin does not appear to have different finishes. Due to the potential of plastic components to discolor, split, or deteriorate over time, an inspection of the entire bumper assembly is required when visible damage to the front or rear of the vehicle occurs. Any damaged inserts or panels must be replaced quickly so the original visual appearance and level of protection are retained. Although inserts are usually sold separately from the original cover, the Mazda 3 Bumper Cover is the main part that joins everything together. The Bumper Cover is a surface that combines protection, styling, and airflow into one design. Each of the Mazda vehicles relies on this important component to drive with confidence every day.

Looking for Bumper Cover with proven quality? Choose OEM Bumper Cover. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda 3 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine 3 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda 3 Bumper Cover Parts and Q&A

Bumper Cover
B37F-50-031D-BB
Q:
How to remove the front and rear bumper cover on Mazda 3?
A:
Unplug the cable on the negative battery terminal. Relax the front wheel lug nut, lift the car and hold it firmly on jackstands then detach the front wheels. Take out the splash shield mounting fasteners and remove the splash shield(s). In the case of the front bumper cover, you have to first detach the upper mounting fasteners of the radiator support, followed by the bottom splash shield and radiator support splash shield. Then unfasten the Fender splash shields and inner fender to the bumper cover, unplug the electrical connectors in the fog lamps (where present) and the inner fenderwell back to release the bumper cover-to-fender mounting fastener. The fender has three mounting fasteners on its edge on 2010 and subsequent models. First of all, unplug the bumper cover mounting tabs in the upper rear edges to the lower edge slots in the front fenders, by pulling the bumper cover outwards, beginning at the fender side and pulling towards the center. Check with a final look with a flashlight to see that the bumper cover is thoroughly uncovered, all the electrical connectors are uncomingled and all the wiring harnesses are clear of the area. Installation is the opposite of removal with the help of removing the front bumper cover. In the case of the rear bumper cover, firstly, take out the taillight housing assemblies, lift the rear part of the vehicle and put it on jackstands. Take off the mounting fasteners of the rear of the wheel wells, then in the taillight area, take off the pin-type fastener and bolt on each upper corner of the rear bumper cover then the mounting fasteners of the underside of the rear bumper cover. Once more, do a final check with a flashlight to make sure that the bumper cover is fully removed, all of the electrical connections are loose and that all of the wiring harnesses were safely clear. Installation can be done in the same direction as removal with some help, except that, when replacing the bumper cover, you must have help attaching the cover to the vehicle against falling.