How to remove and install the door lock and ignition lock cylinder on Mazda 6?

Remove the door window glass and disconnect the cable from the negative battery terminal. Next, remove the door trim panel. For the outside door handle, take off the access hole cover and mounting screw, noting that on 2009 and later models, a stop prevents the screw from being removed. Rotate the latch rod and lock rod clips back to disconnect the rods from the outer handle, then pull the handle outwards. For 2008 and earlier models, remove the cover from the outside handle, and pull the handle out and to the rear to disengage it from the handle reinforcement inside the door. Remove the outside handle support mounting bolt from inside the door and take out the support. Inspect the outside door handle seals and replace them if they are cracked, torn, or deteriorated. Installation is the reverse of removal. For the inside door handle, pull the locking tab back, slide the shaft up, and detach the handle assembly from the door module, then disconnect the door lock cable from the inside door handle cable, with installation being the reverse of removal. To access the door latch, remove the outside door handle and disconnect the inside door handle and cables. Remove the door module mounting screws and take out the module, which includes the power window motor and window regulator. Disconnect the harness connector from the latch lock actuator if it wasn't done earlier, then disconnect the lock rod and latch rod from the door latch. Remove the door latch mounting screws and guide the latch assembly from the door, with installation being the reverse of removal. For the door lock cylinder on 2008 and earlier models, remove the door latch, rotate the lock cylinder counterclockwise until the tab fits into the notch opening, and pull the key lock cylinder out through the door, with installation being the reverse of removal. For 2009 and later models, remove the outside door handle, take out the access plug from the end of the door, and from the inside, remove the key lock rod clip and disconnect the rod from the key cylinder. Loosen the screw through the access hole from the end of the door, press the release tab on the inside of the door handle, and remove the lock cylinder from the door. Finally, separate the exterior trim cap from the key lock cylinder using a small screwdriver to disengage the tabs, with installation being the reverse of removal.

Genuine Mazda 6 Door Lock

Power Door Lock Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

31 Door Locks found

View related parts
Mazda 6 Lock Part Number: GJR9-56-820
$59.18 MSRP: $78.91
You Save: $19.73 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lid; Lock
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2016-2021 Mazda 6 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Lock Part Number: G44A-73-310A
$76.03 MSRP: $101.39
You Save: $25.36 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock(Left), Door; Lock Actuator
- Position: Left
- Replaces: G44A-73-310
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2021 Mazda 6 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Lock Part Number: GK2A-56-820A
$81.25 MSRP: $108.35
You Save: $27.10 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lid; Lock Assembly
- Replaces: GK2A-56-820
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2003-2008 Mazda 6 | i, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda 6 Lock Part Number: G44A-72-310A
$84.24 MSRP: $112.35
You Save: $28.11 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock(Right), Door; Lock Actuator
- Position: Right
- Replaces: G44A-72-310
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2021 Mazda 6 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Latch Assembly Part Number: G44A-57-32XB
$91.34 MSRP: $121.81
You Save: $30.47 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Catch(Right), Remote; Release Cable
- Position: Right
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2021 Mazda 6 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Lock Part Number: GJR9-58-310B
$93.58 MSRP: $124.79
You Save: $31.21 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock(Right), Door; Lock, Lock Actuator
- Position: Right
- Replaces: GJR9-58-310, GJR9-58-310A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2021 Mazda 6 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Lock Part Number: GJR9-59-310E
$93.58 MSRP: $124.79
You Save: $31.21 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock(Left), Door; Lock, Lock Actuator
- Position: Left
- Replaces: GJR9-59-310B, GJR9-59-310, GJR9-59-310A, GJR9-59-310D
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2021 Mazda 6 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Lock Part Number: GSYL-56-82XA
$103.36 MSRP: $137.84
You Save: $34.48 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lid; Lock Assembly
- Replaces: GSYL-56-82X, GS3L-56-820, GS3L-56-820A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2009-2017 Mazda 6 | Grand Touring, i, S, Sport, Touring | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda 6 Lock Part Number: GS3L-59-310E
$105.13 MSRP: $140.20
You Save: $35.07 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock(Left), Door; Lock
- Position: Left
- Replaces: GS3L-59-310C, GS3L-59-310B, GS3L-59-310D
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2009-2010 Mazda 6 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda 6 Lock Part Number: GS3L-58-310E
$108.21 MSRP: $144.31
You Save: $36.10 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock(Right), Door; Lock
- Position: Right
- Replaces: GS3L-58-310B, GS3L-58-310C, GS3L-58-310D
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2009-2010 Mazda 6 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda 6 Latch Assembly Part Number: GHK1-57-32YB
$111.75 MSRP: $149.03
You Save: $37.28 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Catch(Left), Remote; Release Cable
- Position: Left
- Replaces: GHK1-57-32YA, GHK1-57-32Y-02
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2021 Mazda 6 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Lock Part Number: GEA3-58-310A
$116.44 MSRP: $155.28
You Save: $38.84 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock(Right), Door; Lock
- Position: Right
- Replaces: GEA3-58-310
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2011-2013 Mazda 6 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda 6 Lock Part Number: GEA4-58-310A
$116.96 MSRP: $155.97
You Save: $39.01 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock(Right), Door; Lock
- Position: Right
- Replaces: GEA4-58-310
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2011-2013 Mazda 6 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda 6 Lock Part Number: GEA3-59-310A
$118.48 MSRP: $157.99
You Save: $39.51 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock(Left), Door; Lock
- Position: Left
- Replaces: GEA3-59-310
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2011-2013 Mazda 6 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda 6 Lock Part Number: GS3L-73-310E
$123.99 MSRP: $165.35
You Save: $41.36 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock(Left), Door; Lock
- Position: Left
- Replaces: GS3L-73-310D, GS3L-73-310B, GS3L-73-310C, GS3L-73-310A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2009-2013 Mazda 6 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda 6 Lock Part Number: GJT1-72-310A
$124.09 MSRP: $165.48
You Save: $41.39 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock(Right), Door; Lock Actuator
- Position: Right
- Replaces: GJT1-72-310
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2021 Mazda 6 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Lock Part Number: GJT1-73-310A
$124.09 MSRP: $165.48
You Save: $41.39 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock(Left), Door; Lock Actuator
- Position: Left
- Replaces: GJT1-73-310
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2021 Mazda 6 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Lock Part Number: GS3L-72-310E
$124.94 MSRP: $166.62
You Save: $41.68 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock(Right), Door; Lock
- Position: Right
- Replaces: GS3L-72-310C, GS3L-72-310B, GS3L-72-310D, GS3L-72-310A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2009-2013 Mazda 6 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda 6 Lock Part Number: GS3N-72-310E
$124.94 MSRP: $166.62
You Save: $41.68 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock(Right), Door; Lock
- Position: Right
- Replaces: GS3N-72-310B, GS3N-72-310A, GS3N-72-310D
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2009-2013 Mazda 6 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda 6 Lock Part Number: GS3N-73-310E
$124.94 MSRP: $166.62
You Save: $41.68 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock(Left), Door; Lock
- Position: Left
- Replaces: GS3N-73-310A, GS3N-73-310B, GS3N-73-310D
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2009-2013 Mazda 6 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS

| Page 1 of 2 |Next >

1-20 of 31 Results

Mazda 6 Door Lock

The Mazda 6 Door Lock protects the contents and occupants of the cabin by ensuring that the striker on the frame is latched into the Door Lock mechanism by the claw-shaped latch underneath the painted appearance and that the interior knob prevents the exterior handle from opening the door when turning a key. Early 6 sedans applied this mechanical design, but the company soon added a mechanical actuator to the same latch, allowing a fingertip on the armrest to activate all Door Locks simultaneously. This era has brought power into the hands of a small module, allowing the driver to have a master switch and the passenger to have their own buttons so that they do not have to reach behind to the small knobs. Mazda interiors thereafter changed to use pocket-friendly radio transmitters in the ignition fob instead of the fixed keypad. Pressing lock or unlock sends a coded message, which the onboard receiver interprets as actuator movement, and a quick double press flashes lights or briefly toots the horn to indicate status. Even the new Mazda models are connected to the vehicle speed, with the circuit locking when drive is chosen and unlocking when park is chosen as another convenience that facilitates the daily commute. In all these steps the well-known Mazda safety ethic does not change, since regardless of the mode of activation, Door Lock still uses the same heavy clasp to hold doors and safeguards individuals.

Looking for Door Lock with proven quality? Choose OEM Door Lock. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda 6 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine 6 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda 6 Door Lock Parts and Q&A

Lock
G22G-62-310M
Q: How to remove and install the door lock and ignition lock cylinder on Mazda 6?
A:
Remove the door window glass and disconnect the cable from the negative battery terminal. Next, remove the door trim panel. For the outside door handle, take off the access hole cover and mounting screw, noting that on 2009 and later models, a stop prevents the screw from being removed. Rotate the latch rod and lock rod clips back to disconnect the rods from the outer handle, then pull the handle outwards. For 2008 and earlier models, remove the cover from the outside handle, and pull the handle out and to the rear to disengage it from the handle reinforcement inside the door. Remove the outside handle support mounting bolt from inside the door and take out the support. Inspect the outside door handle seals and replace them if they are cracked, torn, or deteriorated. Installation is the reverse of removal. For the inside door handle, pull the locking tab back, slide the shaft up, and detach the handle assembly from the door module, then disconnect the door lock cable from the inside door handle cable, with installation being the reverse of removal. To access the door latch, remove the outside door handle and disconnect the inside door handle and cables. Remove the door module mounting screws and take out the module, which includes the power Window Motor and Window Regulator. Disconnect the harness connector from the latch lock actuator if it wasn't done earlier, then disconnect the lock rod and latch rod from the door latch. Remove the door latch mounting screws and guide the latch assembly from the door, with installation being the reverse of removal. For the door lock cylinder on 2008 and earlier models, remove the door latch, rotate the lock cylinder counterclockwise until the tab fits into the notch opening, and pull the key lock cylinder out through the door, with installation being the reverse of removal. For 2009 and later models, remove the outside door handle, take out the access plug from the end of the door, and from the inside, remove the key lock rod clip and disconnect the rod from the key cylinder. Loosen the screw through the access hole from the end of the door, press the release tab on the inside of the door handle, and remove the lock cylinder from the door. Finally, separate the exterior trim cap from the key lock cylinder using a small screwdriver to disengage the tabs, with installation being the reverse of removal.