Where is the Power Steering Pressure Switch located and what are the steps to remove and install it on Mazda 6?

The power steering pump has the switch clipped on top of it. For all V6 models, lift front of the vehicle off the ground and support it on jackstands as shown. Remove the engine under cover. Remove minimal power steering fluid from the reservoir or prepare to catch the spilled fluid when you will unscrew the PSP switch. To get access, it might be necessary to take out the power steering pump on V6 models; Disconnect the electrical connectors from the PSP switch. Usea deep socket to unscrew the PSP switch. Installation takes place in reverse order and refill the power steering system as necessary.

Genuine Mazda 6 Power Steering Pressure Switch

Power Steering Oil Pressure Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Power Steering Pressure Switches found

View related parts
Mazda 6 Pressure Sensor Part Number: GK2A-32-230
$36.35 MSRP: $48.47
You Save: $12.12 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Pressure; Power Steering Pressure Switch
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2004-2013 Mazda 6 | Mazdaspeed, S, i | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda 6 Pressure Sensor Part Number: NE51-32-230B
$47.09 MSRP: $62.80
You Save: $15.71 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Pressure; Power Steering Pressure Switch
- Replaces: NE51-32-230
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2009-2013 Mazda 6 | S | 6 Cyl 3.7 L GAS
View related parts
Mazda 6 Pressure Sensor Part Number: GJ6A-32-230
Product Specifications
- Other Name: Sensor, Steering Pressure; Power Steering Pressure Switch
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2003-2008 Mazda 6 | Mazdaspeed, S, i | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

Mazda 6 Power Steering Pressure Switch

Looking for Power Steering Pressure Switch with proven quality? Choose OEM Power Steering Pressure Switch. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda 6 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine 6 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda 6 Power Steering Pressure Switch Parts and Q&A

Pressure Sensor
GJ6A-32-230
Q:
Where is the Power Steering Pressure Switch located and what are the steps to remove and install it on Mazda 6?
A:
The power steering pump has the switch clipped on top of it. For all V6 models, lift front of the vehicle off the ground and support it on jackstands as shown. Remove the engine under cover. Remove minimal power steering fluid from the reservoir or prepare to catch the spilled fluid when you will unscrew the PSP switch. To get access, it might be necessary to take out the power steering pump on V6 models; Disconnect the electrical connectors from the PSP switch. Usea deep socket to unscrew the PSP switch. Installation takes place in reverse order and refill the power steering system as necessary.