How to conduct pump testing and perform the removal and installation of the ABS Control Module on Mazda B2200?

To carry out pump testing, disconnect the HCU pump motor electrical plug first, and then connect a Digital volt Ohm meter (DVOM) to the two pump terminals and record the value, which should be between 52-68 Ohms; otherwise, the pump motor should be replaced. To remove and install, disconnect the battery ground cable first, then the 8-pin connector in the unit and the 4-pin connector in the pump motor. The next step is to unplug the 5 inlet and outlet lubes on the unit and be sure to seal the ports immediately. Peel off the 3 unit attaching nuts and pick out the unit, and to install the unit the same way as to pick off. Tighten the mounting nuts to 12-18 ft. lbs. and the lube fittings to 10-18 ft. lbs. Once reattached to the battery, it can be 10 miles or so of driving before the Powertrain Control Module relearns its drive ability codes, and it should be remembered to bleed the brakes.

How to remove and install the ABS Control Module on Mazda Millenia?

First, unscrew the negative battery cable in order to remove and install the ABS control unit. The second step is to remove electrical connectors of the ABS control unit. Next, remove the mounting bolts of the ABS control unit and remove the unit. To install, do it in the same way, but in reverse.

Genuine Mazda ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

144 ABS Control Modules found

View related parts
Mazda Modulator Valve Part Number: TKY8-43-7A0B
$614.37 MSRP: $839.47
You Save: $225.10 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit, Hydraulic-ABS; Modulator Valve
Fits the following Mazda Models:
- CX-9 | 2016-2017 | Grand Touring, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Modulator Valve Part Number: DHYM-43-7A0A
$642.72 MSRP: $878.21
You Save: $235.49 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit, Hydraulic-ABS; ABS Control Unit, Modulator Valve
Fits the following Mazda Models:
- CX-3 | 2018 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Modulator Valve Part Number: NAYJ-43-7A0E
$680.88 MSRP: $930.36
You Save: $249.48 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hydraulic Unit; ABS Control Unit
- Replaces: NAYJ-43-7A0B, NAYJ-43-7A0C
Fits the following Mazda Models:
- MX-5 Miata | 2016-2017 | Club, Grand Touring, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Modulator Valve Part Number: BEYC-43-7A0B
$723.55 MSRP: $988.65
You Save: $265.10 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit, Hydraulic-ABS; ABS Control Unit, Modulator Valve
Fits the following Mazda Models:
- 3 | 2019-2023 | 2.0, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Modulator Valve Part Number: KNY0-43-7A0
$689.47 MSRP: $942.09
You Save: $252.62 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit, Hydraulic-ABS; ABS Control Unit, Modulator Valve
Fits the following Mazda Models:
- CX-5 | 2019 | Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Modulator Valve Part Number: BBY2-43-7AZD
$736.68 MSRP: $1006.60
You Save: $269.92 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit, Hydraulic-ABS; Modulator Valve
- Replaces: BBM2-43-7A0, BBY2-43-7AZA, BBY2-43-7AZC, BBY2-43-7AZ, BBY2-43-7AZB
Fits the following Mazda Models:
- 3 | 2010-2013 | i, Mazdaspeed, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Control Module Part Number: C3Y7-67-65XA
$684.69 MSRP: $935.55
You Save: $250.86 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Box, Control-A.B.S.; Control Box
Fits the following Mazda Models:
- 5 | 2008-2010 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
View related parts
Mazda Modulator Valve Part Number: KBYH-43-7A0C
$740.20 MSRP: $1011.40
You Save: $271.20 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hydraulic Unit; ABS Control Unit, Modulator Valve
- Replaces: KBYH-43-7A0A, KBYH-43-7A0B, KBYH-43-7A0
Fits the following Mazda Models:
- CX-5 | 2017-2018 | Grand Select, Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda ABS Control Unit Part Number: KLYK-43-7A0B
$740.20 MSRP: $1011.40
You Save: $271.20 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit, Hydraulic-ABS; ABS Control Unit
- Replaces: KLYK-43-7A0A
Fits the following Mazda Models:
- CX-5 | 2018 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Modulator Valve Part Number: KNY1-43-7A0
$744.37 MSRP: $1017.10
You Save: $272.73 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit, Hydraulic-ABS; ABS Control Unit, Modulator Valve
Fits the following Mazda Models:
- CX-5 | 2019 | Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Modulator Valve Part Number: KJY1-43-7A0C
$751.30 MSRP: $1026.57
You Save: $275.27 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit, Hydraulic-ABS; ABS Control Unit, Modulator Valve
- Replaces: KJY1-43-7A0, KJY1-43-7A0A, KJY1-43-7A0B
Fits the following Mazda Models:
- CX-5 | 2013-2016 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda ABS Control Unit Part Number: KAY1-43-7A0C
$778.81 MSRP: $1064.16
You Save: $285.35 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit, Hydraulic-ABS; ABS Control Unit
- Replaces: KAY1-43-7A0B, KAY1-43-7A0, KAY1-43-7A0A
Fits the following Mazda Models:
- CX-5 | 2016 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Modulator Valve Part Number: K1Y3-43-7A0B
$801.72 MSRP: $1095.47
You Save: $293.75 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hydraulic Unit; ABS Control Unit, Modulator Valve
Fits the following Mazda Models:
- CX-5 | 2017-2018 | Grand Select, Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Control Module Part Number: BPYK-67-65XD
$746.51 MSRP: $1020.02
You Save: $273.51 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Box, Control
- Replaces: BPYK-67-65XB, BPYK-67-65XA, BPYK-67-65XC, BPYK-67-65X
Fits the following Mazda Models:
- 3 | 2004-2009 | i, Mazdaspeed, S, SP23 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda Modulator Valve Part Number: TE69-43-7A0F
$807.75 MSRP: $1103.70
You Save: $295.95 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit, Hydraulic-ABS; Modulator Valve
- Replaces: TE69-43-7A0A, TE69-43-7A0E, TE69-43-7A0, TE69-43-7A0B, TE69-43-7A0D, TEY9-43-7A0
Fits the following Mazda Models:
- CX-9 | 2010-2012 | Grand Touring, Sport, Touring | 6 Cyl 3.7 L GAS
View related parts
Mazda Modulator Valve Part Number: KSY0-43-7A0
$827.43 MSRP: $1130.59
You Save: $303.16 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit, Hydraulic-ABS; ABS Control Unit, Modulator Valve
Fits the following Mazda Models:
- CX-5 | 2022-2023 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature | 4 Cyl 2.5 L GAS
View related parts
Mazda Modulator Valve Part Number: KBY0-43-7A0
$833.22 MSRP: $1138.51
You Save: $305.29 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hydraulic Unit; ABS Control Unit, Modulator Valve
Fits the following Mazda Models:
- CX-5 | 2020-2021 | Carbon Edition, Carbon Edition Turbo, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Control Module Part Number: DRY1-67-65XA
$787.97 MSRP: $1076.69
You Save: $288.72 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Box, Control-A.B.S.
- Replaces: DRY1-67-65X
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Modulator Valve Part Number: C5Y3-43-7AZB
$867.52 MSRP: $1185.38
You Save: $317.86 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit, Hydraulic-ABS; ABS Control Unit
Fits the following Mazda Models:
- 5 | 2012-2015 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Modulator Valve Part Number: GHY9-43-7A0H
Product Specifications
- Other Name: Hydraulic Unit; Modulator Valve
- Replaces: GHY9-43-7A0C, GHY9-43-7A0F, GHY9-43-7A0B, GHY9-43-7A0A, GHY9-43-7A0D, GHY9-43-7A0E
Fits the following Mazda Models:
- 6 | 2014-2015 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS

| Page 1 of 8 |Next >

1-20 of 144 Results

Mazda ABS Control Module

Mazda ABS Control Module ensures protection of the traction by sensing wheel speed hundreds of times each second and adjusting the brake pressure to keep drivers in control even when they brake. Mazda has built its reputation on spirited handling, efficient Skyactiv engines, distinctive Kodo styling and the confidence of i-Activsense driver aids, working together to make journeys fun as well as responsible. Founded in Japan in 1931, Mazda continues to perfect lightweight construction, explore electric power and test i-Activ AWD on rough terrain to prove durability, giving owners a lively ride that also sips fuel. Whether cruising city streets or cutting a mountain road, Mazda vehicles provide fast response and connected driving that sets them apart from average cars. At the heart of that dynamic experience, the ABS Control Module stands guard across the entire lineup, linking wheel sensors, valves and a hydraulic pump into a fast-thinking electronic partner that prevents lock-up in milliseconds. The updated versions of ABS Control Module also feed the information to stability and traction systems, coordinating brake force at each corner of the vehicle to reduce stops and straighten slides before the driver even notices a problem. Because the module works automatically and resets immediately, every Mazda driver enjoys smoother braking, shorter stopping distances and steady control on wet, icy or dry pavement.

You'll get great performance and real durability when you pick genuine OEM ABS Control Module. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda ABS Control Module Parts and Q&A

Control Module
UE4667650A
Q: How to conduct pump testing and perform the removal and installation of the ABS Control Module on Mazda B2200?
A:
To carry out pump testing, disconnect the HCU pump motor electrical plug first, and then connect a Digital volt Ohm meter (DVOM) to the two pump terminals and record the value, which should be between 52-68 Ohms; otherwise, the pump motor should be replaced. To remove and install, disconnect the battery ground cable first, then the 8-pin connector in the unit and the 4-pin connector in the pump motor. The next step is to unplug the 5 inlet and outlet lubes on the unit and be sure to seal the ports immediately. Peel off the 3 unit attaching nuts and pick out the unit, and to install the unit the same way as to pick off. Tighten the mounting nuts to 12-18 ft. lbs. and the lube fittings to 10-18 ft. lbs. Once reattached to the battery, it can be 10 miles or so of driving before the Powertrain Control Module relearns its drive ability codes, and it should be remembered to bleed the brakes.
Control Module
T007-67-650
Q: How to remove and install the ABS Control Module on Mazda Millenia?
A:
First, unscrew the negative battery cable in order to remove and install the ABS control unit. The second step is to remove electrical connectors of the ABS control unit. Next, remove the mounting bolts of the ABS control unit and remove the unit. To install, do it in the same way, but in reverse.