How to access and service the antennas,Antenna Cable and amplifier on Mazda 3?

The rear window-mounted-antenna on the 2010 and subsequent models are built into the rear window and cannot be serviced individually. To reach the center roof antenna, the C-pillar trim and center trim (side of the rear window), rear seats and possibly the rear map light must be pried out. To remove the antenna, pull down the back part of the headliner, where there is an antenna, disconnect the electrical connections, and remove the nut of the antenna mount, and then it is the opposite of that to put it back in. In the case of the center roof antenna mast, all one needs to do is to unscrew it at the base and the installation is also the opposite of the removal. In order to get to the antenna amplifier, pry out the C-pillar trim and center trim, front map light (where present) and the headliner and access the amplifier. Unscrew the electrical connectors and loosen the mounting screws and the amplifier and install it using the same procedure in reverse. The antenna cable is made up of a front part, the middle part, and the rear part. The front cable passes through the instrument panel and is connected to the middle cable at the base of the A-pillar and then proceeds up the A-pillar to the C-pillar where the cable joins the rear cable. The back cable is attached at C-pillar, and then flows up to the roof and over to the antenna. Change of any of these cables would involve the A-pillar, B-pillar, C-pillar, roof trim, and headliner, which is not an easy task, which is why it is only advisable to the experienced do-it-yourselfer.

How is the rear window mounted antenna,Antenna Cable serviced and what are the steps involved in removing and replacing it on Mazda 6?

The rear window mounted antenna is an integral component of the rear window and cannot be serviced separately. For the center roof antenna on 2008 and earlier models, carefully pry out the C-pillar trim and center trim from the side of the rear windshield, remove the rear seats, and the rear map light if equipped. Next, remove the plastic push pin fasteners around the trunk liner and take out the liner. Pull the rear section of the headliner down far enough to access the antenna, disconnect the electrical connectors, and remove the antenna mounting nut to take out the antenna, with installation being the reverse of removal. To remove the center roof antenna mast, unscrew it from the base, with installation also being the reverse. For the antenna amplifier, pry out the C-pillar trim and center trim from the side of the rear window, remove the rear map light if equipped, and pull down the rear section of the headliner to access the amplifier. Disconnect the electrical connectors, remove the mounting screws, and take out the amplifier, with installation being the reverse. The antenna cable consists of three cables: front, middle, and rear. The front cable connects to the middle cable at the base of the A-pillar, which runs up through the A-pillar along the roof edge and down to the C-pillar, connecting to the rear cable. The rear cable runs from the C-pillar back up to the roof and across to the antenna. Replacing any of these cables requires removing the A-pillar, B-pillar, C-pillar, roof trim, and headliner, a procedure recommended only for experienced do-it-yourselfers due to its difficulty.

Genuine Mazda Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

206 Antenna Cables found

View related parts
Mazda Antenna Cable Part Number: KD2W-66-F30
$40.51 MSRP: $54.02
You Save: $13.51 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder, Antenna-Audio Side
Fits the following Mazda Models:
- CX-5 | 2017-2023 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Antenna Cable Part Number: EG22-66-940
$12.23 MSRP: $93.00
You Save: $80.77 (87%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder-Antenna
Fits the following Mazda Models:
- CX-7 | 2007-2012 | Grand Touring, SV, Sport, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Antenna Cable Part Number: BJT7-66-F40
$13.36 MSRP: $85.89
You Save: $72.53 (85%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder-Antenna
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Antenna Cable Part Number: BAJC-66-F40
$13.36 MSRP: $85.39
You Save: $72.03 (85%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder-Antenna
Fits the following Mazda Models:
- 3 | 2017-2018 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Cable Part Number: EC01-66-940B
$8.18 MSRP: $47.79
You Save: $39.61 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Antenna Feeder; Antenna Cable
- Replaces: EC01-66-940, EC01-66-940A
Fits the following Mazda Models:
- Tribute | 2001-2006 | DX, ES, LX, S, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Wire Part Number: VA45-66-F30
$13.60 MSRP: $18.14
You Save: $4.54 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder, Antenna-Audio Side
Fits the following Mazda Models:
- CX-50 | 2023-2025 | 2.5 S, 2.5 Turbo, Hybrid Preferred, Hybrid Premium | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
View related parts
Mazda Antenna Cable Part Number: BJS7-66-F30
$18.56 MSRP: $24.76
You Save: $6.20 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder, Antenna-Audio
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Antenna Cable Part Number: BJS8-66-F30
$18.60 MSRP: $24.81
You Save: $6.21 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder, Antenna-Audio
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Antenna Cable Part Number: D10J-66-F20
$22.38 MSRP: $29.85
You Save: $7.47 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder, Instrument Panel
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Antenna Cable Part Number: DD2F-66-F30
$26.08 MSRP: $34.78
You Save: $8.70 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder, Antenna-Audio Side
Fits the following Mazda Models:
- CX-3 | 2016-2019 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Antenna Cable Part Number: DD2H-66-F30
$27.75 MSRP: $37.00
You Save: $9.25 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder, Antenna-Audio Side
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Antenna Cable Part Number: BHN9-66-F30
$28.80 MSRP: $38.41
You Save: $9.61 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder, Antenna-Audio Side
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Cable Part Number: BBM6-66-940B
$29.13 MSRP: $38.84
You Save: $9.71 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder-Antenna
- Replaces: BBM6-66-940A, BBM6-66-940
Fits the following Mazda Models:
- 3 | 2010-2013 | S, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Antenna Cable Part Number: TK48-66-F30
$30.09 MSRP: $40.13
You Save: $10.04 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder, Antenna-Audio Side
Fits the following Mazda Models:
- CX-9 | 2016-2018 | Grand Touring, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Antenna Cable Part Number: EH48-66-940A
$31.16 MSRP: $41.57
You Save: $10.41 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder-Antenna
- Replaces: EH48-66-940
Fits the following Mazda Models:
- CX-7 | 2010-2012 | Grand Touring, SV, Sport, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Antenna Cable Part Number: DR61-66-940
$32.09 MSRP: $42.79
You Save: $10.70 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder-Antenna
Fits the following Mazda Models:
- 2 | 2011-2012 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Antenna Cable Part Number: DR61-66-940A
$32.81 MSRP: $43.76
You Save: $10.95 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder-Antenna
Fits the following Mazda Models:
- 2 | 2013-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Antenna Cable Part Number: DH2F-66-F40
$34.04 MSRP: $45.39
You Save: $11.35 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder-Antenna
Fits the following Mazda Models:
- CX-3 | 2020-2021 | Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Antenna Cable Part Number: VA45-66-F50A
$34.19 MSRP: $45.60
You Save: $11.41 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder-Antenna
Fits the following Mazda Models:
- CX-50 | 2023-2025 | 2.5 S, 2.5 Turbo, Hybrid Preferred, Hybrid Premium | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
View related parts
Mazda Antenna Cable Part Number: EG24-66-940
$34.78 MSRP: $46.38
You Save: $11.60 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder-Antenna
Fits the following Mazda Models:
- CX-7 | 2007-2012 | Grand Touring, SV, Sport, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS

| Page 1 of 11 |Next >

1-20 of 206 Results

Mazda Antenna Cable

The Mazda Antenna Cable offers clear radio sound by supplying signals from the vehicle antenna to the receiver. Mazda is renowned for its dynamic management, an invention of the Jinba Ittai philosophy whereby steering response is matched by engines that are able to work on low fuel consumption because of SKYACTIV technology and KODO styling that gives every Mazda a sculpted presence that can appeal to drivers interested in artistic automotive works. The Japanese company that started building vehicles in 1931 later delighted fans with the engine and now further enhances safety with i-ACTIVSENSE. These features, which include lane-keeping support and radar cruise, watch the road for you so you can concentrate on the joy of driving. Mazda tirelessly tests i-ACTIV all-wheel drive on terrain and rolls out hybrid and electric choices that lessen emissions without dulling the fun. Within each of the models, ergonomics places the controls where the hands fall to showcase how Mazda combines comfort with sport. While the brand excites, the Antenna Cable retains a heroics that is entertainment flowing. An Antenna Cable is a coax line applied to connect an external mast or roof unit to the head unit. It prevents electrical noise from entering the radio frequency stream and is applied with an inline amplifier to boost weak broadcasts so music, news, and sport stay clear even in distant countryside or stormy weather. A rugged jacket will resist vibration and temperature swings, while standardized connectors mean drivers across the lineup can fit a new line if reception fades to protect the seamless infotainment experience they expect.

You'll get great performance and real durability when you pick genuine OEM Antenna Cable. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Antenna Cable Parts and Q&A

Antenna Cable
BBM4-66-9N0D
Q:
How to access and service the antennas,Antenna Cable and amplifier on Mazda 3?
A:
The rear window-mounted-antenna on the 2010 and subsequent models are built into the rear window and cannot be serviced individually. To reach the center roof antenna, the C-pillar trim and center trim (side of the rear window), rear seats and possibly the rear map light must be pried out. To remove the antenna, pull down the back part of the headliner, where there is an antenna, disconnect the electrical connections, and remove the nut of the antenna mount, and then it is the opposite of that to put it back in. In the case of the center roof antenna mast, all one needs to do is to unscrew it at the base and the installation is also the opposite of the removal. In order to get to the antenna amplifier, pry out the C-pillar trim and center trim, front map light (where present) and the headliner and access the amplifier. Unscrew the electrical connectors and loosen the mounting screws and the amplifier and install it using the same procedure in reverse. The antenna cable is made up of a front part, the middle part, and the rear part. The front cable passes through the instrument panel and is connected to the middle cable at the base of the A-pillar and then proceeds up the A-pillar to the C-pillar where the cable joins the rear cable. The back cable is attached at C-pillar, and then flows up to the roof and over to the antenna. Change of any of these cables would involve the A-pillar, B-pillar, C-pillar, roof trim, and headliner, which is not an easy task, which is why it is only advisable to the experienced do-it-yourselfer.
Antenna Cable
GS3N-66-940B
Q:
How is the rear window mounted antenna,Antenna Cable serviced and what are the steps involved in removing and replacing it on Mazda 6?
A:
The rear window mounted antenna is an integral component of the rear window and cannot be serviced separately. For the center roof antenna on 2008 and earlier models, carefully pry out the C-pillar trim and center trim from the side of the rear windshield, remove the rear seats, and the rear map light if equipped. Next, remove the plastic push pin fasteners around the trunk liner and take out the liner. Pull the rear section of the headliner down far enough to access the antenna, disconnect the electrical connectors, and remove the antenna mounting nut to take out the antenna, with installation being the reverse of removal. To remove the center roof antenna mast, unscrew it from the base, with installation also being the reverse. For the antenna amplifier, pry out the C-pillar trim and center trim from the side of the rear window, remove the rear map light if equipped, and pull down the rear section of the headliner to access the amplifier. Disconnect the electrical connectors, remove the mounting screws, and take out the amplifier, with installation being the reverse. The antenna cable consists of three cables: front, middle, and rear. The front cable connects to the middle cable at the base of the A-pillar, which runs up through the A-pillar along the roof edge and down to the C-pillar, connecting to the rear cable. The rear cable runs from the C-pillar back up to the roof and across to the antenna. Replacing any of these cables requires removing the A-pillar, B-pillar, C-pillar, roof trim, and headliner, a procedure recommended only for experienced do-it-yourselfers due to its difficulty.