How to remove and install the Automatic Transmission Oil Cooler on Mazda 3?

Lift the front of the car and place it on jackstands and take off the wheels. Further, take off the bottom splash shields. Put a drain pan under the transaxle cooler, clamp the transaxle fluid and coolant hoses so that they do not drain, and take out the mounting clamps. The next step is to rip off the cooler mounting bolts and the cooler. Removal is the opposite of installation, and the transaxle and coolant levels should be checked after it.

How to service the Automatic Transmission Oil Cooler on Mazda Tribute?

To service the main cooler on 2013 and later models, lift up and uphold the automobile on jack stands, and drain the cooling system. Take out the battery and the battery tray, loosen the transaxle cooler tube connection by taking out the bolts, and then check on the O-rings to be changed in case of necessity. Unhook the coolant hoses to the transaxle cooler, disconnect the two bolts that hold the cooler to the transaxle and extract the cooler out of the vehicle. To be installed, reverse the process of removal, and make sure to replenish the coolant and transaxle fluid. In the auxiliary cooler (2007 and its models and 2013 and its models) to have access to the cooler, take off the front bumper cover, disconnect the cooler line (removing connector covers on 2013 and later models), and remove the bolts holding the cooler together. Pull out the cooler, lifting it on the year 2013 and subsequent models withdrawing the bracket by sliding it upwards, and then securing it by following the steps backward and with all the fasteners firmly in place. The cooler bypass of the 2013 and later with a auxiliary cooler must be raised and located by lifting the front part of the vehicle and taking off the under cover and the valve is found under the driver side. Install a drain pan beneath the valve, disconnect the four transaxle cooler lines and remove the bolt by which the bracket of the bypass valve is attached to the transaxle. Move the bracket to the new part as needed and reattach it by reversing the de-attachment steps whilst filling up the transaxle fluid. In the case of fluid heater control valve, to access the fluid heater control valve, which is attached to the engine side of the battery tray, the air filter housing and battery tray/box are removed then unscrewing the clamps and disconnecting the coolant hoses and electrical connector. To install the valve in the battery tray, unscrew and remove the screw and push-in retainer and then repeat the process in the reverse order topping off the coolant. Finally, in the control valve of the fluid cooler that is attached to the fan shroud, loosen the clamps and disconnect the electrical connector, coolant hoses and loosen the clamps and disconnect the fan and shroud to reach the valve bracket retainers. Unattach the valve bracket with the fan shroud, then reattach it by going through the same process in an opposite manner and do not forget to fill up the coolant as needed.

Genuine Mazda Automatic Transmission Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Automatic Transmission Oil Coolers found

View related parts
Mazda Transmission Cooler Part Number: FZ22-19-9F3
$153.51 MSRP: $204.72
You Save: $51.21 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler, Oil; Transmission Cooler
- Replaces: FZ02-19-9F0
Fits the following Mazda Models:
- CX-50 | 2023-2024 | 2.5 S | 4 Cyl 2.5 L GAS
View related parts
Mazda Transmission Cooler Part Number: FZ01-19-9F0
$155.64 MSRP: $207.56
You Save: $51.92 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler, Oil; Oil Cooler, Transmission Cooler
- Replaced by: FZ21-19-9F3
Fits the following Mazda Models:
- 3 | 2012-2016 | i, i Grand Touring, I Sport, i SV, I Touring, Mazdaspeed, S, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2014-2015 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-5 | 2013-2016 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Transmission Cooler Part Number: FZ21-19-9F3
$155.64 MSRP: $207.56
You Save: $51.92 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler, Oil; Oil Cooler, Transmission Cooler
- Replaces: FZ01-19-9F0, FZA1-19-9F0
Fits the following Mazda Models:
- 3 | 2016-2024 | 2.0, 2.5 S, Base, Carbon Edition, Grand Touring, i Grand Touring, I Sport, I Touring, Preferred, Premium, s Grand Touring, s Touring, Select, Select Sport, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
- CX-5 | 2016-2024 | 2.5 S, 2.5 S Carbon Edition, Carbon Edition, Grand Select, Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Transmission Cooler Part Number: FZ31-19-9F3
$181.10 MSRP: $241.52
You Save: $60.42 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler, Oil; Transmission Cooler
Fits the following Mazda Models:
- 3 | 2021-2024 | 2.5 Carbon Turbo, 2.5 Turbo, 2.5 Turbo Premium Plus | 4 Cyl 2.5 L GAS
- 6 | 2018-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature | 4 Cyl 2.5 L GAS
- CX-30 | 2021-2023 | 2.5 Turbo | 4 Cyl 2.5 L GAS
- CX-5 | 2019-2024 | 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition Turbo, Grand Touring Reserve, Signature | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
- CX-50 | 2023-2024 | 2.5 Turbo | 4 Cyl 2.5 L GAS
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Transmission Cooler Part Number: GF31-19-9F0
$269.78 MSRP: $359.77
You Save: $89.99 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler, Oil; Transmission Cooler
- Replaces: GF31-19-9F0A, GF30-19-9F0A
Fits the following Mazda Models:
- MPV | 2000-2006 | DX, ES, LX, LX-SV | 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Transmission Cooler Part Number: L33D-15-V10
$422.77 MSRP: $568.35
You Save: $145.58 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler, A/T Oil; Transmission Cooler
Fits the following Mazda Models:
- CX-9 | 2007-2009 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Transmission Cooler Part Number: GF32-19-9F0B
$422.47 MSRP: $567.95
You Save: $145.48 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler, Oil; Transmission Cooler
Fits the following Mazda Models:
- MPV | 2000-2006 | DX, ES, LX, LX-SV | 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Transmission Cooler Part Number: FSKC-19-9F0
$520.18 MSRP: $699.30
You Save: $179.12 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler, Oil; Transmission Cooler
Fits the following Mazda Models:
- 3 | 2010-2013 | i, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 5 | 2012-2015 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Auxiliary Cooler Part Number: FSKB-19-9F0
$542.41 MSRP: $729.19
You Save: $186.78 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler, Oil; Auxiliary Cooler
Fits the following Mazda Models:
- 3 | 2010 | S | 4 Cyl 2.5 L GAS
View related parts
Mazda Oil Cooler Part Number: FNFC-19-9F0
$317.18 MSRP: $422.99
You Save: $105.81 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler, Oil
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Transmission Cooler Part Number: FW85-19-9F3A
Product Specifications
- Other Name: Cooler, Oil; Transmission Cooler
- Replaces: FW85-19-9F3
Fits the following Mazda Models:
- Tribute | 2001-2004 | DX, ES, LX | 6 Cyl 3.0 L GAS
View related parts
Mazda Transmission Cooler Part Number: FWA1-19-9F0
Product Specifications
- Other Name: Cooler, Oil; Transmission Cooler
Fits the following Mazda Models:
- Tribute | 2008, 2006 | i, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Transmission Cooler Part Number: 1F71-19-844
Product Specifications
- Other Name: Oil Cooler, Transmission; Transmission Cooler
Fits the following Mazda Models:
- B2300 | 2001-2009 | Base, SE, SX | 4 Cyl 2.3 L GAS
- B2500 | 1998-2001 | SE, SX, Troy Lee | 4 Cyl 2.5 L GAS
- B3000 | 1998-2007 | Base, DS, SE, SX, Troy Lee | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
- B4000 | 1998-2009 | Base, DS, SE, Troy Lee | 6 Cyl 4.0 L GAS
View More
View related parts
Mazda Transmission Cooler Part Number: AW30-19-9F0B
Product Specifications
- Other Name: Cooler, Oil; Transmission Cooler
Fits the following Mazda Models:
- CX-7 | 2007-2012 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
View related parts
Mazda Oil Cooler Part Number: BV11199F0B
Product Specifications
- Other Name: Cooler Oil
Fits the following Mazda Models:
- MPV | 1991-1998 | Cargo, DX, ES, L, LX, LXE, Passenger | 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Transmission Cooler Part Number: FW80-19-9F0D
Product Specifications
- Other Name: Cooler, Oil; Transmission Cooler
Fits the following Mazda Models:
- Tribute | 2005 | i, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

Mazda Automatic Transmission Oil Cooler

The Mazda Automatic Transmission Oil Cooler helps to maintain the ideal temperature of the transmission fluid so that each shift is crisp and the gearbox lasts longer. Mazda commands loyalty with punchy (but efficient) Skyactiv powertrains, the graceful Kodo design language that turns heads on any street, and i-Activsense safety tech that helps drivers keep alert and confident. From nimble hatchbacks to capable SUVs, Mazda vehicles aspire to a fun-to-drive feel without losing real-world fuel savings. The brand also experiments with electric drive and mild hybrid systems, and its i-Activ AWD shows its mettle on rough roads while maintaining smooth manners in the city. Driving a Mazda often feels engaging because every pedal, wheel, and seat is sensitive to the driver. Equally important, the Automatic Transmission Oil Cooler supports that vivacious spirit by controlling heat that could thicken fluid or burn vital additives. Designed to fit neatly into the engine coolant flow, the Automatic Transmission Oil Cooler provides rapid warming of fluid after startup but then dissipates excess heat in long climbs or heavy traffic conditions, so clutches and seals throughout the full lineup will not suffer damage. Strong internal plates resist corrosion, and their compact packaging ensures low weight, in line with Mazda's aims for balanced handling and efficiency. Routine coolant changes are recommended to keep those cooler passages open so every Mazda continues to deliver spirited yet reliable performance mile after mile.

You'll get great performance and real durability when you pick genuine OEM Automatic Transmission Oil Cooler. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Automatic Transmission Oil Cooler Parts and Q&A

Transmission Cooler
FSKC-19-9F0
Q: How to remove and install the Automatic Transmission Oil Cooler on Mazda 3?
A:
Lift the front of the car and place it on jackstands and take off the wheels. Further, take off the bottom splash shields. Put a drain pan under the transaxle cooler, clamp the transaxle fluid and coolant hoses so that they do not drain, and take out the mounting clamps. The next step is to rip off the cooler mounting bolts and the cooler. Removal is the opposite of installation, and the transaxle and coolant levels should be checked after it.
Transmission Cooler
FW80-19-9F0D
Q: How to service the Automatic Transmission Oil Cooler on Mazda Tribute?
A:
To service the main cooler on 2013 and later models, lift up and uphold the automobile on jack stands, and drain the cooling system. Take out the battery and the battery tray, loosen the transaxle cooler tube connection by taking out the bolts, and then check on the O-rings to be changed in case of necessity. Unhook the coolant hoses to the transaxle cooler, disconnect the two bolts that hold the cooler to the transaxle and extract the cooler out of the vehicle. To be installed, reverse the process of removal, and make sure to replenish the coolant and transaxle fluid. In the auxiliary cooler (2007 and its models and 2013 and its models) to have access to the cooler, take off the front bumper cover, disconnect the cooler line (removing connector covers on 2013 and later models), and remove the bolts holding the cooler together. Pull out the cooler, lifting it on the year 2013 and subsequent models withdrawing the bracket by sliding it upwards, and then securing it by following the steps backward and with all the fasteners firmly in place. The cooler bypass of the 2013 and later with a auxiliary cooler must be raised and located by lifting the front part of the vehicle and taking off the under cover and the valve is found under the driver side. Install a drain pan beneath the valve, disconnect the four transaxle cooler lines and remove the bolt by which the bracket of the bypass valve is attached to the transaxle. Move the bracket to the new part as needed and reattach it by reversing the de-attachment steps whilst filling up the transaxle fluid. In the case of fluid heater control valve, to access the fluid heater control valve, which is attached to the engine side of the battery tray, the air filter housing and battery tray/box are removed then unscrewing the clamps and disconnecting the coolant hoses and electrical connector. To install the valve in the battery tray, unscrew and remove the screw and push-in retainer and then repeat the process in the reverse order topping off the coolant. Finally, in the control valve of the fluid cooler that is attached to the fan shroud, loosen the clamps and disconnect the electrical connector, coolant hoses and loosen the clamps and disconnect the fan and shroud to reach the valve bracket retainers. Unattach the valve bracket with the fan shroud, then reattach it by going through the same process in an opposite manner and do not forget to fill up the coolant as needed.