How to remove and install the Engine Cover on Mazda Protege?

Removal of the front cover Firstly, disconnect the negative battery cable and then remove the under cover splash shield. Make sure that the front of the car is on jackstands so that you can reach the front cover and then take off the front passenger side tire. Then take off the alternator followed by the air conditioning compressor without disconnecting the hoses and storing the compressor. Continue to remove the crankshaft pulley, water pump pulley, timing belt covers, timing belt and timing belt guide. Slide the crankshaft off the crankshaft using two prybars or screwdrivers placed behind the crankshaft sprocket so that pressure is evenly distributed. Bolts or nuts on the front cover Screwdriver Place a screwdriver between the pump housing and front main bearing cap to remove front bolts or nuts on the engine block. To install, scrape all the residual gasket and sealant off the cover and engine block, clean the mating surfaces with solvent. Fit the front cover gasket to a thin coating of silicone sealant on the surface of the front cover gasket and re-fit the front cover to the engine block, the sealant must not block any oil passages. At last, install the bolts or nuts and tighten them to the required torque and then install it by following the reversal of the steps to remove it.

Genuine Mazda Engine Cover

Engine Cover Intake Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

111 Engine Covers found

View related parts
Mazda Valve Cover Part Number: L502-10-210E
$376.84 MSRP: $506.60
You Save: $129.76 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Cylinder Head
- Replaces: L3Y1-10-210A, L502-10-210D, L512-10-210B, L502-10-210B, L502-10-210C, L512-10-210A
Fits the following Mazda Models:
- 3 | 2010-2013 | i, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 5 | 2012-2015, 2008-2010 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2009-2013 | i | 4 Cyl 2.5 L GAS
- CX-7 | 2010-2012 | Sport, SV, Touring | 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Engine Cover Part Number: PE11-10-2F0
$216.58 MSRP: $288.82
You Save: $72.24 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Plug Hole
- Replaces: PEAR-10-2F0
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2014-2018 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-3 | 2016-2018 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
- CX-5 | 2013-2017 | Grand Select, Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Valve Cover Part Number: PY01-10-210A
$235.60 MSRP: $314.20
You Save: $78.60 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Cylinder Head
- Replaces: PY01-10-210
Fits the following Mazda Models:
- 3 | 2014-2025 | 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Grand Touring, Preferred, Premium, Select, Select Sport, Touring, s Grand Touring, s Touring | 4 Cyl 2.5 L GAS
- 6 | 2014-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-30 | 2020-2022 | 2.5 S, 2.5 S Carbon Edition, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
- CX-5 | 2014-2017 | Grand Select, Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Valve Cover Part Number: PE02-10-210A
$239.44 MSRP: $319.32
You Save: $79.88 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Cylinder Head
- Replaces: PE02-10-210
Fits the following Mazda Models:
- 3 | 2021-2022, 2014-2018 | 2.0, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV | 4 Cyl 2.0 L GAS
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
- CX-5 | 2013-2016 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View More
View related parts
Mazda Valve Cover Part Number: PYFA-10-210A
$245.28 MSRP: $327.09
You Save: $81.81 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Cylinder Head
- Replaces: PYFA-10-210
Fits the following Mazda Models:
- 3 | 2024, 2019-2020 | 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.5 L GAS
- 6 | 2018-2021 | Sport, Touring | 4 Cyl 2.5 L GAS
- CX-30 | 2023-2025 | 2.5 S, 2.5 S Carbon Edition | 4 Cyl 2.5 L GAS
- CX-5 | 2018-2025 | 2.5 S, 2.5 S Carbon Edition, Carbon Edition, Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Valve Cover Part Number: PY8W-10-210B
$246.43 MSRP: $328.63
You Save: $82.20 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Cylinder Head
- Replaces: PY8W-10-210A
Fits the following Mazda Models:
- 6 | 2018-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature | 4 Cyl 2.5 L GAS
- CX-30 | 2021-2025 | 2.5 Carbon Turbo, 2.5 Turbo | 4 Cyl 2.5 L GAS
- CX-5 | 2019-2025 | 2.5 Carbon Turbo, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition Turbo, Grand Touring Reserve, Signature | 4 Cyl 2.5 L GAS
- CX-50 | 2023-2025 | 2.5 Turbo | 4 Cyl 2.5 L GAS
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Engine Cover Part Number: P51B-10-230A
$36.30 MSRP: $48.40
You Save: $12.10 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Seal
Fits the following Mazda Models:
- MX-5 Miata | 2016-2019 | Club, Grand Touring, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Engine Cover Part Number: PAF3-10-2F0A
$111.66 MSRP: $148.91
You Save: $37.25 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Plug Hole
- Replaces: PAF3-10-2F0
Fits the following Mazda Models:
- 3 | 2021-2023 | 2.0, 2.5 S, Carbon Edition, Preferred, Premium, Select | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- CX-30 | 2020-2022 | 2.5 S, 2.5 S Carbon Edition, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Engine Cover Part Number: PY8V-10-2F0C
$154.08 MSRP: $205.47
You Save: $51.39 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Plug Hole
- Replaces: PY8V-10-2F0B, PY8V-10-2F0A
Fits the following Mazda Models:
- CX-5 | 2019 | Grand Touring Reserve, Signature | 4 Cyl 2.5 L GAS
- CX-9 | 2016-2019 | Grand Touring, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Cover Part Number: LF96-10-2F0C
$185.61 MSRP: $247.54
You Save: $61.93 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Plug Hole; Engine Cover
- Replaces: LF96-10-2F0A, LF96-10-2F0B
Fits the following Mazda Models:
- 3 | 2006-2013 | S, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 5 | 2012-2015 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
- 6 | 2009-2013 | i | 4 Cyl 2.5 L GAS
- CX-7 | 2010-2012 | SV, Sport, Touring | 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Engine Cover Part Number: PYFA-10-2F0
$212.33 MSRP: $283.15
You Save: $70.82 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate
Fits the following Mazda Models:
- 6 | 2018 | Sport, Touring | 4 Cyl 2.5 L GAS
- CX-5 | 2018-2019 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Valve Cover Part Number: SH10-10-220
$236.09 MSRP: $314.85
You Save: $78.76 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Cylinder Head
Fits the following Mazda Models:
- CX-5 | 2019 | Signature | 4 Cyl 2.2 L DIESEL
View related parts
Mazda Valve Cover Part Number: ZZC6-10-220A
$27.62 MSRP: $445.60
You Save: $417.98 (94%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Right, Cylinder Head
- Position: Passenger Side
- Replaces: ZZC6-10-220
Fits the following Mazda Models:
- Tribute | 2009-2011 | S | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mazda Engine Cover Part Number: PA7W-10-230
$41.73 MSRP: $55.64
You Save: $13.91 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Seal
Fits the following Mazda Models:
- MX-5 Miata | 2020-2025 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Cover Part Number: CA07-10-2F0
$51.23 MSRP: $68.32
You Save: $17.09 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Plug Hole
Fits the following Mazda Models:
- 6 | 2009-2013 | S | 6 Cyl 3.7 L GAS
View related parts
Mazda Cover Part Number: ZZC1-10-2F1
$65.89 MSRP: $87.86
You Save: $21.97 (26%)
ADD TO CART
Product Specifications
- Other Name: Plate, Plug Hole
- Replaces: ZZC0-10-2F1, ZZC0-10-2F1A, ZZC0-10-2F1B
Fits the following Mazda Models:
- Tribute | 2008-2011 | S | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mazda Engine Cover Part Number: PX01-10-2F0A
$73.74 MSRP: $98.33
You Save: $24.59 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Plug Hole
- Replaces: PX01-10-2F0
Fits the following Mazda Models:
- 6 | 2019-2021 | Sport, Touring | 4 Cyl 2.5 L GAS
- CX-5 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, Carbon Edition, Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Cover Part Number: AJ57-10-2F0G
$92.89 MSRP: $123.88
You Save: $30.99 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Plug Hole
- Replaces: AJ57-10-2F0C, AJ57-10-2F0E, AJ57-10-2F0D, AJ57-10-2F0B, AJ57-10-2F0F
Fits the following Mazda Models:
- 6 | 2003-2008 | S | 6 Cyl 3.0 L GAS
View related parts
Mazda Engine Cover Part Number: PXNS-10-2F0
$107.65 MSRP: $143.56
You Save: $35.91 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Plug Hole
Fits the following Mazda Models:
- 3 | 2024-2025 | 2.5 S, Carbon Edition, Preferred, Premium, Select Sport | 4 Cyl 2.5 L GAS
- CX-30 | 2023-2025 | 2.5 S, 2.5 S Carbon Edition | 4 Cyl 2.5 L GAS
- CX-50 | 2025 | 2.5 S, Hybrid Preferred, Hybrid Premium | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Valve Cover Part Number: 1F70-10-220
$120.64 MSRP: $160.88
You Save: $40.24 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Cylinder Head
Fits the following Mazda Models:
- B2300 | 2004-2009 | Base, SE | 4 Cyl 2.3 L GAS

| Page 1 of 6 |Next >

1-20 of 111 Results

Mazda Engine Cover

The Mazda Engine Cover conceals naked mechanical parts. Thus, every opened hood looks finely packaged and reflects pride in appearance. Meanwhile, it adds a light shield against road dust. Mazda's models display sharp handling and smart engines with the agile flexibility of the KODO design, which lends life to every body contour. Mazda also equips its cars with i-ACTIVSENSE features, which include lane keep assist and radar cruise that keep driving drama free. With its i-ACTIV all-wheel drive, you can tackle rough tracks without fear. Mazda has been pursuing innovative ideas since 1931. From the rotary motor to current mild hybrids that cut fuel bills yet keep things fun to drive, this is a restless brand. So, it appeals to young drivers who want style, tech, and reliability all in one. Mazda consistently displays focus and attention to detail under the hood. Returning to investigate the Engine Cover, the cover furthers the brand promise to create a tidy engine bay that reflects refined exteriors. The lightweight material of the Engine Cover enables molding of this part, which can hide all the wires and hoses and provide a neat clean sheet look to the viewer. You will be able to lift the bonnet at car meets and feel confident that the car's powerplant looks as good as the paint, thanks to its smooth one-piece design. Owners can click it in place in a jiffy as it focuses on aesthetics rather than complicated changes, letting owners enjoy showroom looks without the performance penalties.

You'll get great performance and real durability when you pick genuine OEM Engine Cover. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Engine Cover Parts and Q&A

Valve Cover
FP85-10-220A
Q:
How to remove and install the Engine Cover on Mazda Protege?
A:
Removal of the front cover Firstly, disconnect the negative battery cable and then remove the under cover splash shield. Make sure that the front of the car is on jackstands so that you can reach the front cover and then take off the front passenger side tire. Then take off the alternator followed by the air conditioning compressor without disconnecting the hoses and storing the compressor. Continue to remove the crankshaft pulley, water pump pulley, timing belt covers, timing belt and timing belt guide. Slide the crankshaft off the crankshaft using two prybars or screwdrivers placed behind the crankshaft sprocket so that pressure is evenly distributed. Bolts or nuts on the front cover Screwdriver Place a screwdriver between the pump housing and front main bearing cap to remove front bolts or nuts on the engine block. To install, scrape all the residual gasket and sealant off the cover and engine block, clean the mating surfaces with solvent. Fit the front cover gasket to a thin coating of silicone sealant on the surface of the front cover gasket and re-fit the front cover to the engine block, the sealant must not block any oil passages. At last, install the bolts or nuts and tighten them to the required torque and then install it by following the reversal of the steps to remove it.