How to check and replace the Cooling Fan Assembly and Fan Clutch on Mazda MPV?

Checking the fan To test the fan, first unscrew the negative battery cable and shake the fans back and forth manually to test the bearing play. Turn the blades by hand when cold, it must turn freely. Checks: Check the clutch assembly, check the bi-metal spring to determine whether it is deformed or not, and check whether there is a lot of fluid leakage, and also examine whether there is leakage of grease on the exit, and replace the fan clutch accordingly. The ignition should be switched off, and the negative battery cable should be disconnected once more, when the engine is warmed up. Rotate fan manually; it must have some resistance and in case it is easy to rotate the fan then the fan clutch has to be replaced. To remove, disassemble the negative battery cable, unbolt and remove the fresh air duct on the radiator top and remove the nuts which hold the fan assembly to the water pump flange. Take out the top mounting bolts of the fan shroud and squeeze the plastic bottom fasteners on the lower parts of the fan shroud with the long needle-nose pliers. A cooling fan assembly may then be installed using a movement of both the shroud and fan upwards. Removal is done in the opposite sequence of installation.

How to remove and reassemble the Fan Clutch attached to the water pump pulley on Mazda RX-7?

The fan assembly is fitted to the water pump pulley on the front side of the engine. Starting with the four bolts that hold the fan assembly to the flange on the water pump pulley; remove the assembly out of the radiator cowling and the engine compartment. In case this is too troublesome, remove the cowling on the sides of the radiator and raise it a bit so that it clears. The next step is to loosen up the four bolts connecting the fan with the fan clutch and take apart the two parts. To reassemble, attach the fan clutch to the fan and attach the assembly to the flange on the water pump pulley.

Genuine Mazda Fan Clutch

Cooling Fan Clutch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

19 Fan Clutches found

View related parts
Mazda Clutch Part Number: 1F82-15-150
$223.46 MSRP: $298.02
You Save: $74.56 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Drive; Fan Clutch
- Replaces: ZZP2-15-150
Fits the following Mazda Models:
- B4000 | 1998-2009 | Base, DS, SE, Troy Lee | 6 Cyl 4.0 L GAS
View related parts
Mazda Clutch Part Number: G607-15-150A
$279.66 MSRP: $372.96
You Save: $93.30 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Drive; Fan Clutch
- Replaces: G607-15-150
Fits the following Mazda Models:
- B2600 | 1989-1993 | Base, LE-5, LX, SE-5 | 4 Cyl 2.6 L GAS
View related parts
Mazda Clutch Part Number: N350-15-150
$368.73 MSRP: $491.74
You Save: $123.01 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Drive; Fan Clutch
Fits the following Mazda Models:
- RX-7 | 1989-1991 | Base, Convertible, GTU, GTUs, GXL, GXL 2+2, Turbo | 2 Cyl 1.3 L GAS
View related parts
Mazda Clutch Part Number: JE57-15-150A
Product Specifications
- Other Name: Fan Drive; Fan Clutch
Fits the following Mazda Models:
- MPV | 1992-1995 | L, LX, LXE, Passenger | 6 Cyl 3.0 L GAS
View related parts
Mazda Clutch Part Number: ZZP3-15-150
Product Specifications
- Other Name: Fan Drive; Fan Clutch
Fits the following Mazda Models:
- B2500 | 1998-2001 | SE, SX, Troy Lee | 4 Cyl 2.5 L GAS
View related parts
Mazda Clutch Part Number: ZZP0-15-150
Product Specifications
- Other Name: Fan Drive; Fan Clutch
Fits the following Mazda Models:
- B2500 | 1998-2001 | SE, SX, Troy Lee | 4 Cyl 2.5 L GAS
View related parts
Mazda Clutch Part Number: ZZMA15150
Product Specifications
- Other Name: Fan Drive; Fan Clutch
Fits the following Mazda Models:
- B3000 | 1994-1996 | Base, SE | 6 Cyl 3.0 L GAS
- B4000 | 1995-1997 | Base, LE, SE | 6 Cyl 4.0 L GAS
View related parts
Mazda Clutch Part Number: ZZM7-15-150
Product Specifications
- Other Name: Fan Drive
Fits the following Mazda Models:
- B3000 | 1994 | Base, SE | 6 Cyl 3.0 L GAS
View related parts
Mazda Clutch Part Number: ZZM2-15-150B
Product Specifications
- Other Name: Fan Drive; Fan Clutch
Fits the following Mazda Models:
- B4000 | 1994-1997 | Base, LE, SE | 6 Cyl 4.0 L GAS
View related parts
Mazda Clutch Part Number: ZZL315150B
Product Specifications
- Other Name: Fan Drive; Fan Clutch
Fits the following Mazda Models:
- Navajo | 1991-1992 | DX, LX | 6 Cyl 4.0 L GAS
View related parts
Mazda Clutch Part Number: N249-15-210B
Product Specifications
- Other Name: Fan Drive; Fan Clutch
Fits the following Mazda Models:
- RX-7 | 1984-1985 | GS, GSL, S | 2 Cyl 1.1 L GAS
View related parts
Mazda Clutch Part Number: JF0415150A
Product Specifications
- Other Name: Fan Drive; Fan Clutch
Fits the following Mazda Models:
- 929 | 1988-1991 | Base, S | 6 Cyl 3.0 L GAS
View related parts
Mazda Clutch Part Number: JE48-15-150C
Product Specifications
- Other Name: Fan Drive; Fan Clutch
Fits the following Mazda Models:
- 929 | 1992-1995 | Base | 6 Cyl 3.0 L GAS
- MPV | 1996-1998 | DX, ES, LX | 6 Cyl 3.0 L GAS
View related parts
Mazda Clutch Part Number: JE2315150
Product Specifications
- Other Name: Fan Drive
Fits the following Mazda Models:
- MPV | 1989-1990 | Passenger | 6 Cyl 3.0 L GAS
View related parts
Mazda Clutch Part Number: FE66-23-907
Product Specifications
- Other Name: Fan Drive; Fan Clutch
Fits the following Mazda Models:
- B2000 | 1986 | Base, LX, SE-5 | 4 Cyl 2.0 L GAS
- B2200 | 1987-1993 | Base, LE-5, LX, SE-5 | 4 Cyl 2.2 L GAS
View related parts
Mazda Clutch Part Number: FE2H-15-150B
Product Specifications
- Other Name: Fan Drive; Fan Clutch
Fits the following Mazda Models:
- B2000 | 1987 | Base, LX, SE-5 | 4 Cyl 2.0 L GAS
- B2200 | 1987-1993 | Base, LE-5, LX, SE-5 | 4 Cyl 2.2 L GAS
- B2600 | 1987-1993 | Base, LE-5, LX, SE-5 | 4 Cyl 2.6 L GAS
View More
View related parts
Mazda Clutch Part Number: AM15159X3
Product Specifications
- Other Name: Fan Drive; Fan Clutch
Fits the following Mazda Models:
- B2600 | 1987-1988 | Base, LX, SE-5 | 4 Cyl 2.6 L GAS
View related parts
Mazda Clutch Part Number: 1F81-15-150
Product Specifications
- Other Name: Fan Drive; Fan Clutch
Fits the following Mazda Models:
- B3000 | 1998-2007 | Base, DS, SE, SX, Troy Lee | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mazda Clutch Part Number: 1F80-15-150
Product Specifications
- Other Name: Fan Drive; Fan Clutch
Fits the following Mazda Models:
- B2300 | 2001-2009 | Base, SE, SX | 4 Cyl 2.3 L GAS

Mazda Fan Clutch

The Mazda Fan Clutch controls airflow through the radiator at the right time when a build up of heat occurs to keep the engine cool while conserving power. Mazda built a global reputation for its ability to blend enthusiastic handling and reliable engineering from early rotary icons to modern SKYACTIV engines, which use little fuel yet rev gladly. The automobile manufacturer blends its KODO design with i-ACTIVSENSE safety so drivers enjoy stylish looks and smart protection while available i-ACTIV all-wheel drive grips confidently on winding or rough roads. Mazda is also looking into electric assistance to reduce emissions, proving efficiency can live alongside driving. Mazda designs every new car with great attention to detail and with a promise of performance, economy and style for the customer to enjoy during every daily commute. Within the hood, the Fan Clutch helps fulfill that promise by spinning freely at lower temperatures, reducing drag to help the engine reach its optimal temperature quickly. As temperature rises, the unit locks and pushes the cooling fan harder to bring a rush of air through the radiator to drop coolant temperature and avoid overheating. This quick response maintains thermal equilibrium in various climates, ensures stable horsepower delivery, and conserves mechanical energy versus a constantly running fan. Due to the mounting of the Mazda Fan Clutch directly on the water pump pulley and the working off the crankshaft belt, it provides a straightforward mechanical solution tailored to the longitudinal layouts typical of the brand portfolio. The end result for drivers is smooth performance and dependable cooling for long engine life.

You'll get great performance and real durability when you pick genuine OEM Fan Clutch. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Fan Clutch Parts and Q&A

Clutch
JE48-15-150C
Q:
How to check and replace the Cooling Fan Assembly and Fan Clutch on Mazda MPV?
A:
Checking the fan To test the fan, first unscrew the negative battery cable and shake the fans back and forth manually to test the bearing play. Turn the blades by hand when cold, it must turn freely. Checks: Check the clutch assembly, check the bi-metal spring to determine whether it is deformed or not, and check whether there is a lot of fluid leakage, and also examine whether there is leakage of grease on the exit, and replace the fan clutch accordingly. The ignition should be switched off, and the negative battery cable should be disconnected once more, when the engine is warmed up. Rotate fan manually; it must have some resistance and in case it is easy to rotate the fan then the fan clutch has to be replaced. To remove, disassemble the negative battery cable, unbolt and remove the fresh air duct on the radiator top and remove the nuts which hold the fan assembly to the water pump flange. Take out the top mounting bolts of the fan shroud and squeeze the plastic bottom fasteners on the lower parts of the fan shroud with the long needle-nose pliers. A cooling fan assembly may then be installed using a movement of both the shroud and fan upwards. Removal is done in the opposite sequence of installation.
Clutch
N249-15-210B
Q:
How to remove and reassemble the Fan Clutch attached to the water pump pulley on Mazda RX-7?
A:
The fan assembly is fitted to the water pump pulley on the front side of the engine. Starting with the four bolts that hold the fan assembly to the flange on the water pump pulley; remove the assembly out of the radiator cowling and the engine compartment. In case this is too troublesome, remove the cowling on the sides of the radiator and raise it a bit so that it clears. The next step is to loosen up the four bolts connecting the fan with the fan clutch and take apart the two parts. To reassemble, attach the fan clutch to the fan and attach the assembly to the flange on the water pump pulley.