How should the hood be removed and installed safely and effectively on Mazda 6?

The hood is clumsy to take out and install thus at least two individuals should carry out this action. Start by opening up the hood and covering the body and paint with blankets or pads over the hood fenders and cowl to prevent damage in the lift. Mark around the hood hinge in order to make sure that it is aligned correctly during the installation process. Having another person to assist you on one side of the hood, hold on to the bottom corner and with your shoulder, hold it steady as you make turns to unscrew the hinge-to-hood bolts so as to remove the hood. To install, position the hinge bolts to fit in the marks that have been made. In order to fine-tune the hood, loosen the hinge-to-body bolts and adjust the hood in the fore-and-aft and side-to-side directions, then proceed to tighten the bolts with each minute step. The hood also is adjustable vertically to be in line with the fenders by clockwise rotation of each cushion to lower the hood down and anti clockwise rotation to raise the hood up. The hood latch assembly and the hinges should as well be regularly oiled with white, lithium-base grease to avoid binding and wear.

How should two people safely remove and install a car hood on Mazda 3?

The hood is so cumbersome to take out and onboard, thus this process should be done by two persons at least. Start by opening the hood and then laying blankets or pads over the fenders and cow area to prevent the damage of the body and paint during the lifting. Mark around the hood hinge, so as to make sure that everything comes together when it is being installed. Use your shoulder to hold one corner of the hood and have an assist help you with the other side of the hood. Repeat the procedure of removing the hinge-to-hood bolts in turns and removing the hood. To install it, match the hinge bolts with the marks created above. In order to adjust the hood, loosen the hinge-to-body bolts and adjust the hinges by making minor adjustments and tightening the bolts and then confirming the position. The hood is as well adjustable vertically by clockwise and counterclockwise rotation of each cushion to bring it down or up respectively. Also, it is necessary to periodically coat the hood latch system and the hinges with white, lithium-base grease to avoid binding and wear.

Genuine Mazda Hood

Engine Hood

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

45 Hoods found

View related parts
Mazda Hood Part Number: EGY1-52-31XD
$653.20 MSRP: $892.53
You Save: $239.33 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bonnet, Hood
- Replaces: EGY1-52-31XC, EGY1-52-31X, EGY1-52-31XB, EGY1-52-31XA
Fits the following Mazda Models:
- CX-7 | 2007-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Hood Part Number: TDY1-52-31XE
$743.13 MSRP: $1015.41
You Save: $272.28 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: TDY1-52-31XD
Fits the following Mazda Models:
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Hood Part Number: FEY1-52-31X
$758.90 MSRP: $1036.96
You Save: $278.06 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bonnet
- Replaces: F151-52-310D, F151-52-310B, F1Y1-52-31X
Fits the following Mazda Models:
- RX-8 | 2004-2011 | 40th Anniversary Edition, Base, Grand Touring, R3, Shinka, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Hood Part Number: NCY0-52-31XK
$875.50 MSRP: $1196.28
You Save: $320.78 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: NCY0-52-31XJ, NCY0-52-31XH, NCY0-52-31XF, NCY0-52-31XG
Fits the following Mazda Models:
- Miata | 1999-2005 | 10th Anniversary, Base, LS, Mazdaspeed, SE, Shinsen | 4 Cyl 1.8 L GAS
View related parts
Mazda Hood Part Number: NPY1-52-31X
$963.62 MSRP: $1316.67
You Save: $353.05 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bonnet
- Replaces: NEY1-52-31XA, NEY1-52-31X
Fits the following Mazda Models:
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Hood Part Number: D6Y1-52-31X
$363.69 MSRP: $485.02
You Save: $121.33 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bonnet
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Hood Part Number: BPYK-52-31XB
$403.57 MSRP: $542.55
You Save: $138.98 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bonnet
- Replaces: BPYK-52-31X, BP4K-52-310, BPYK-52-31XA
Fits the following Mazda Models:
- 3 | 2004-2009 | S, SP23 | 4 Cyl 2.3 L GAS
View related parts
Mazda Hood Part Number: DKY0-52-31XA
$432.55 MSRP: $581.50
You Save: $148.95 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bonnet
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Hood Part Number: KDY3-52-31XA
$449.39 MSRP: $604.14
You Save: $154.75 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bonnet
Fits the following Mazda Models:
- CX-5 | 2013-2016 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Hood Part Number: BBY5-52-31XA
$466.57 MSRP: $627.24
You Save: $160.67 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bonnet
Fits the following Mazda Models:
- 3 | 2010-2013 | Mazdaspeed | 4 Cyl 2.3 L GAS
View related parts
Mazda Hood Part Number: BBY4-52-31XC
$467.33 MSRP: $628.26
You Save: $160.93 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bonnet
- Replaces: BBY4-52-31XA, BBY4-52-31XB, BBY4-52-31X
Fits the following Mazda Models:
- 3 | 2010-2013 | i, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Hood Part Number: GBY0-52-31XB
$490.63 MSRP: $659.58
You Save: $168.95 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bonnet; Hood
- Replaces: GBY0-52-31X, GBY0-52-31XA
Fits the following Mazda Models:
- 6 | 2018-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Hood Part Number: GHY0-52-31X
$509.81 MSRP: $685.37
You Save: $175.56 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bonnet
Fits the following Mazda Models:
- 6 | 2014-2017 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Hood Part Number: GK2A-52-310D
$502.70 MSRP: $675.80
You Save: $173.10 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bonnet
- Replaces: GK2A-52-310B, GK2A-52-310C
Fits the following Mazda Models:
- 6 | 2003-2008 | i, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Hood Part Number: GS3L-52-310-SP
$507.40 MSRP: $682.12
You Save: $174.72 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bonnet
Fits the following Mazda Models:
- 6 | 2009-2013 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Hood Part Number: KBY0-52-31XB
$598.31 MSRP: $804.34
You Save: $206.03 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bonnet; Hood
- Replaced by: KBY0-52-31XC
Fits the following Mazda Models:
- CX-5 | 2017-2022 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Hood Part Number: LEY3-52-31XA
$524.00 MSRP: $704.45
You Save: $180.45 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: LE43-52-310, LEY3-52-31X
Fits the following Mazda Models:
- MPV | 2004-2006 | ES, LX, LX-SV | 6 Cyl 3.0 L GAS
View related parts
Mazda Hood Part Number: LC62-52-310E
$530.27 MSRP: $712.88
You Save: $182.61 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bonnet
- Replaces: LC62-52-310D
Fits the following Mazda Models:
- MPV | 2000-2003 | DX, ES, LX | 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Hood Part Number: B30D-52-310C
Product Specifications
- Other Name: Bonnet
Fits the following Mazda Models:
- Protege | 2001-2003 | DX, ES, LX, Mazdaspeed, MP3 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS
- Protege5 | 2002-2003 | Base | 4 Cyl 2.0 L GAS
View related parts
Mazda Hood Part Number: GPYA-52-31XC
Product Specifications
- Other Name: Bonnet
- Replaces: GPYA-52-31XB, GPYA-52-31X, GPYA-52-31XA
Fits the following Mazda Models:
- 6 | 2006-2007 | Mazdaspeed | 4 Cyl 2.3 L GAS

| Page 1 of 3 |Next >

1-20 of 45 Results

Mazda Hood

Every part of the car is important. Your vehicle's performance will be compromised if something goes wrong with the Mazda Hood. Therefore, for your smooth driving and safety, you need regular checks and timely replacements. Whenever you need replacements, opt for genuine Mazda Hoods. Because they meet the manufacturer's criteria, it guarantees that replacements fit perfectly. Thus, these make better choices for people who care about driving. Why should you shop at MazdaPartsNow.com? We sell genuine Mazda Hoods. In our online catalog, there is a wide range of different parts. These are delivered directly from authorized Mazda dealers only so that customers can be sure of their security throughout any transaction while using our website. Furthermore, you can also quickly search for OEM parts you want because of our user-friendly site navigation. Choose us for a genuine Mazda Hood that keeps your car running like new.

Mazda Hood Parts and Q&A

Hood
GK2A-52-310D
Q: How should the hood be removed and installed safely and effectively on Mazda 6?
A:
The hood is clumsy to take out and install thus at least two individuals should carry out this action. Start by opening up the hood and covering the body and paint with blankets or pads over the hood fenders and cowl to prevent damage in the lift. Mark around the hood hinge in order to make sure that it is aligned correctly during the installation process. Having another person to assist you on one side of the hood, hold on to the bottom corner and with your shoulder, hold it steady as you make turns to unscrew the hinge-to-hood bolts so as to remove the hood. To install, position the hinge bolts to fit in the marks that have been made. In order to fine-tune the hood, loosen the hinge-to-body bolts and adjust the hood in the fore-and-aft and side-to-side directions, then proceed to tighten the bolts with each minute step. The hood also is adjustable vertically to be in line with the fenders by clockwise rotation of each cushion to lower the hood down and anti clockwise rotation to raise the hood up. The hood latch assembly and the hinges should as well be regularly oiled with white, lithium-base grease to avoid binding and wear.
Hood
BBY5-52-31XA
Q: How should two people safely remove and install a car hood on Mazda 3?
A:
The hood is so cumbersome to take out and onboard, thus this process should be done by two persons at least. Start by opening the hood and then laying blankets or pads over the fenders and cow area to prevent the damage of the body and paint during the lifting. Mark around the hood hinge, so as to make sure that everything comes together when it is being installed. Use your shoulder to hold one corner of the hood and have an assist help you with the other side of the hood. Repeat the procedure of removing the hinge-to-hood bolts in turns and removing the hood. To install it, match the hinge bolts with the marks created above. In order to adjust the hood, loosen the hinge-to-body bolts and adjust the hinges by making minor adjustments and tightening the bolts and then confirming the position. The hood is as well adjustable vertically by clockwise and counterclockwise rotation of each cushion to bring it down or up respectively. Also, it is necessary to periodically coat the hood latch system and the hinges with white, lithium-base grease to avoid binding and wear.