How to adjust the rear brakes before adjusting the parking brake cable on Mazda MPV?

At the initial stage, the rear brakes are adjusted and then the parking brake cable is adjusted. The parking brake system should have approximately five to seven clicks when lifting the parking brake lever and in case it takes more clicks then it needs to be adjusted. Turn the engine on, reverse the vehicle and press the brake pedal a few times as you move backwards and then switch the engine off. Take off the cover that has the retaining screw and the cover of the parking brake lever. Then pull the adjusting nut clip cut off and twist the adjusting nut at the front of the cable. Lastly, switch on the ignition, move the parking brake lever one step, make sure the parking brake indicator light comes on and the rear brakes do not drag.

How to remove and install the parking brake cable on Mazda MPV?

Take off the parking brake lever adjusting nut and release the parking brake. Take away the floormats and rear seat. Stuff the wheels, lift the car and place it safely on jackstands. Take out the rear brake shoes and remove the parking brake lever(s). Under-vehicle This work is performed in reverse sequence, by removing the parking brake cable(s) by disconnection, removing the parking brake cable bracket off the lower suspension arm, removing the retaining clip off the parking brake cable at the backing plate, removing the brake shoes, and removing the cable off the parking brake lever. Under the hood of the car, remove the cable that was attached to the lever of the parking brake. Removal is the opposite of installation. Installation of a new cable or cables will require you to readjust the parking brake lever stroke and that you depress the brake pedal a few times and ensure that the rear brakes do not drag as you turn up the wheels.

Genuine Mazda MPV Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Parking Brake Cables found

View related parts
Mazda MPV Front Cable Part Number: LC62-44-150D
$47.53 MSRP: $63.38
You Save: $15.85 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Parking Cable
- Position: Front
- Replaces: LC62-44-150C, LD47-44-150
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2000-2006 Mazda MPV | DX, ES, LX, LX-SV | 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda MPV Rear Cable Part Number: LC62-44-410C
$10.97 MSRP: $14.40
You Save: $3.43 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Right, Park
- Position: Rear
- Replaces: LC62-44-410B, LD47-44-410
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2000-2003 Mazda MPV | DX, ES, LX | 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda MPV Rear Cable Part Number: LE44-44-410C
$85.13 MSRP: $113.53
You Save: $28.40 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Right, Park
- Position: Rear
- Replaces: LE44-44-410
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2004-2006 Mazda MPV | ES, LX, LX-SV | 6 Cyl 3.0 L GAS
View related parts
Mazda MPV Rear Cable Part Number: LE44-44-420D
$86.03 MSRP: $114.73
You Save: $28.70 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable(Left), Rear-Parking
- Position: Rear
- Replaces: LE44-44-420
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2004-2006 Mazda MPV | ES, LX, LX-SV | 6 Cyl 3.0 L GAS
View related parts
Mazda MPV Rear Cable Part Number: LB40-44-410
$111.28 MSRP: $148.40
You Save: $37.12 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable(Right), Rear-Parking
- Position: Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1994-1995 Mazda MPV | L, LX, LXE, Passenger | 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda MPV Front Cable Part Number: LA01-44-150A
$8.59 MSRP: $11.27
You Save: $2.68 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Parking Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1989-1998 Mazda MPV | Cargo, DX, ES, L, LX, LXE, Passenger | 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda MPV Rear Cable Part Number: LC62-44-420E
$10.85 MSRP: $14.24
You Save: $3.39 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable(Left), Rear-Parking
- Position: Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2000-2003 Mazda MPV | DX, ES, LX | 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda MPV Rear Cable Part Number: LA01-44-420D
Product Specifications
- Other Name: Cable Left, Park
- Position: Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1989-1993 Mazda MPV | Cargo, Passenger | 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda MPV Rear Cable Part Number: LA12-44-420D
Product Specifications
- Other Name: Cable Left, Park
- Position: Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1989-1993 Mazda MPV | Cargo, Passenger | 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda MPV Rear Cable Part Number: LB4044420A
Product Specifications
- Other Name: Cable, Left Park
- Position: Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1994-1995 Mazda MPV | L, LX, LXE, Passenger | 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda MPV Rear Cable Part Number: LB8244420A
Product Specifications
- Other Name: Cable, Left Park
- Position: Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1996-1998 Mazda MPV | DX, ES, LX | 6 Cyl 3.0 L GAS

Mazda MPV Parking Brake Cable

Looking for Parking Brake Cable with proven quality? Choose OEM Parking Brake Cable. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda MPV parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine MPV part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda MPV Parking Brake Cable Parts and Q&A

Rear Cable
LA12-44-420D
Q: How to adjust the rear brakes before adjusting the parking brake cable on Mazda MPV?
A:
At the initial stage, the rear brakes are adjusted and then the parking brake cable is adjusted. The parking brake system should have approximately five to seven clicks when lifting the parking brake lever and in case it takes more clicks then it needs to be adjusted. Turn the engine on, reverse the vehicle and press the brake pedal a few times as you move backwards and then switch the engine off. Take off the cover that has the retaining screw and the cover of the parking brake lever. Then pull the adjusting nut clip cut off and twist the adjusting nut at the front of the cable. Lastly, switch on the ignition, move the parking brake lever one step, make sure the parking brake indicator light comes on and the rear brakes do not drag.
Front Cable
LA01-44-150A
Q: How to remove and install the parking brake cable on Mazda MPV?
A:
Take off the parking brake lever adjusting nut and release the parking brake. Take away the floormats and rear seat. Stuff the wheels, lift the car and place it safely on jackstands. Take out the rear brake shoes and remove the parking brake lever(s). Under-vehicle This work is performed in reverse sequence, by removing the parking brake cable(s) by disconnection, removing the parking brake cable bracket off the lower suspension arm, removing the retaining clip off the parking brake cable at the backing plate, removing the brake shoes, and removing the cable off the parking brake lever. Under the hood of the car, remove the cable that was attached to the lever of the parking brake. Removal is the opposite of installation. Installation of a new cable or cables will require you to readjust the parking brake lever stroke and that you depress the brake pedal a few times and ensure that the rear brakes do not drag as you turn up the wheels.