How to properly remove and install an A/C Compressor on Mazda MX-5 Miata?

Start with discharging the refrigerant and recovering them by a qualified repair center. Take off the negative cable of the battery. Disconnect the drivebelt of the A/C Compressor. Spin the rear wheels to ensure that the vehicle does not roll, jack up the front section at least one foot and put it on jackstands. Take off splash shield and air guide panels under the front of the car. Unscrew the refrigerant lines and compressor electric connector, unbolt the A/C Compressor and lift it out of the car. In case of installing a new compressor or rebuilt compressor, observe the instructions given concerning the correct amount of refrigerant oil to be added prior to installation. Installation is in the opposite of the removal, make sure that the compressor mounting bolts are connected tight and also use new O-rings that match refrigerant type used in your system, lubricating them with the refrigerant oil before you install. Lastly, get the system emptied, recharged, and leak checked by the shop that emptied it.

Genuine Mazda MX-5 Miata A/C Compressor

Air Conditioning Compressor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 A/C Compressors found

View related parts
Mazda MX-5 Miata Compressor Part Number: NEY1-61-450
$950.81 MSRP: $1299.18
You Save: $348.37 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: NE51-61-K00, NE51-61-450A, NE51-61-450B
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2006-2015 Mazda MX-5 Miata | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda MX-5 Miata Compressor Part Number: NA1J-61-450
$610.56 MSRP: $834.27
You Save: $223.71 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2016-2023 Mazda MX-5 Miata | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda MX-5 Miata Compressor Part Number: NA6W-61-450
$547.05 MSRP: $735.43
You Save: $188.38 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2022 Mazda MX-5 Miata | Club, Grand Touring, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS

Mazda MX-5 Miata A/C Compressor

Looking for A/C Compressor with proven quality? Choose OEM A/C Compressor. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda MX-5 Miata parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine MX-5 Miata part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda MX-5 Miata A/C Compressor Parts and Q&A

Compressor
NEY1-61-450
Q: How to properly remove and install an A/C Compressor on Mazda MX-5 Miata?
A:
Start with discharging the refrigerant and recovering them by a qualified repair center. Take off the negative cable of the battery. Disconnect the drivebelt of the A/C Compressor. Spin the rear wheels to ensure that the vehicle does not roll, jack up the front section at least one foot and put it on jackstands. Take off splash shield and air guide panels under the front of the car. Unscrew the refrigerant lines and compressor electric connector, unbolt the A/C Compressor and lift it out of the car. In case of installing a new compressor or rebuilt compressor, observe the instructions given concerning the correct amount of refrigerant oil to be added prior to installation. Installation is in the opposite of the removal, make sure that the compressor mounting bolts are connected tight and also use new O-rings that match refrigerant type used in your system, lubricating them with the refrigerant oil before you install. Lastly, get the system emptied, recharged, and leak checked by the shop that emptied it.