Where is the Power Steering Pressure Switch located and what are the steps to remove and install it on Mazda 6?

The power steering pump has the switch clipped on top of it. For all V6 models, lift front of the vehicle off the ground and support it on jackstands as shown. Remove the engine under cover. Remove minimal power steering fluid from the reservoir or prepare to catch the spilled fluid when you will unscrew the PSP switch. To get access, it might be necessary to take out the power steering pump on V6 models; Disconnect the electrical connectors from the PSP switch. Usea deep socket to unscrew the PSP switch. Installation takes place in reverse order and refill the power steering system as necessary.

Where is the Power Steering Pressure Switch located and what are the steps for its removal and installation on Mazda MX-5 Miata?

The power steering pump has the PSP switch with all models. The first thing to do is remove the negative battery terminal cable. After that, Disconnect PSP Switch electrical connector. Use a wrench or deep socket to unscrew the switch, and be ready to catch spilled power steering fluid with a shop rag. While installing back track the removal process and ensure that the PSP switch is tightened.

Genuine Mazda Power Steering Pressure Switch

Power Steering Oil Pressure Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Power Steering Pressure Switches found

View related parts
Mazda Pressure Sensor Part Number: GK2A-32-230
$36.35 MSRP: $48.47
You Save: $12.12 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Pressure; Power Steering Pressure Switch
Fits the following Mazda Models:
- 6 | 2004-2013 | Mazdaspeed, S, i | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- CX-7 | 2007-2012 | Grand Touring, SV, Sport, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Pressure Sensor Part Number: NE51-32-230B
$47.09 MSRP: $62.80
You Save: $15.71 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Pressure; Power Steering Pressure Switch
- Replaces: NE51-32-230
Fits the following Mazda Models:
- 6 | 2009-2013 | S | 6 Cyl 3.7 L GAS
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, SV, Special Edition, Sport, Touring | 4 Cyl 2.0 L GAS
View More
View related parts
Mazda Power Steering Pressure Switch Part Number: H380-32-230
$175.60 MSRP: $234.18
You Save: $58.58 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Pressure
Fits the following Mazda Models:
- Millenia | 1995-2000 | Base, L, Millennium Edition, S | 6 Cyl 2.3 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda Power Steering Pressure Switch Part Number: T001-32-230
Product Specifications
- Other Name: Sensor, Steering Pressure
Fits the following Mazda Models:
- Millenia | 2001-2002 | Base, S | 6 Cyl 2.3 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda Pressure Sensor Part Number: GJ6A-32-230
Product Specifications
- Other Name: Sensor, Steering Pressure; Power Steering Pressure Switch
Fits the following Mazda Models:
- 6 | 2003-2008 | Mazdaspeed, S, i | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

Mazda Power Steering Pressure Switch

Mazda's Power Steering Pressure Switch protects the low speed steering operation. It lets the engine computer know more hydraulic load means more idle. Mazda's consistently sporty character gives every hatchback, sedan, or SUV a distinctly Mazda look that attracts a loyal following. Mazda earns the loyalty of many car buyers thanks to the way it mixes together engaging handling, efficient SKYACTIV engines, and eye-catching KODO styling. The firm, which started in Japan in 1931, has continuously developed lightweight chassis components to help convey driver intent to the road and i-ACTIVSENSE safety aids monitor traffic to enhance confidence. Mazda believes in the joy of driving and is inherently driven to create solutions that will contribute to the enjoyment of driving across the world. Every enhancement seeks to make the daily commute and weekend trip equally enjoyable for the owners. The Power Steering Pressure Switch embodies this philosophy of parts harmony beautifully. Located inside the hydraulic steering line, the Power Steering Pressure Switch can detect when fluid pressure increases while parking in tight situations. When the pre-set level is achieved, the internal diaphragm closes an electrical circuit to signal the engine control unit to add a small amount of throttle to prevent stalling and keep power steering strong. As the wheel returns to its straight position and the pressure drops, the contacts will open and idle will return to normal. Due to that instantaneity, the switch helps keep the steering feel consistent across the Mazda lineup in an effortless way for drivers, showing how a small component helps protect performance and reliability.

You'll get great performance and real durability when you pick genuine OEM Power Steering Pressure Switch. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Power Steering Pressure Switch Parts and Q&A

Pressure Sensor
GJ6A-32-230
Q:
Where is the Power Steering Pressure Switch located and what are the steps to remove and install it on Mazda 6?
A:
The power steering pump has the switch clipped on top of it. For all V6 models, lift front of the vehicle off the ground and support it on jackstands as shown. Remove the engine under cover. Remove minimal power steering fluid from the reservoir or prepare to catch the spilled fluid when you will unscrew the PSP switch. To get access, it might be necessary to take out the power steering pump on V6 models; Disconnect the electrical connectors from the PSP switch. Usea deep socket to unscrew the PSP switch. Installation takes place in reverse order and refill the power steering system as necessary.
Pressure Sensor
NE51-32-230B
Q:
Where is the Power Steering Pressure Switch located and what are the steps for its removal and installation on Mazda MX-5 Miata?
A:
The power steering pump has the PSP switch with all models. The first thing to do is remove the negative battery terminal cable. After that, Disconnect PSP Switch electrical connector. Use a wrench or deep socket to unscrew the switch, and be ready to catch spilled power steering fluid with a shop rag. While installing back track the removal process and ensure that the PSP switch is tightened.