How to remove and install the Exterior Door Handle on Mazda RX-7?

Lower the window completely and release the trim panel and all related equipment. Tease the plastic water shield from the top left corner of the door. Place some rags or old newspaper into the door cavity under the door handle assembly. This will prevent any parts or tools from falling, if accidentally dropped, to the bottom of the door. Detach the push rod from the outer handle assembly, which is secured by a plastic locking clip that you must pry away from the rod. Unfasten the two attaching nuts at the outer ends of the handle while supporting it on the outside of the door and remove it. In order to install, the studs on the outer handle are pushed through the holes of the door and attached to the two nuts. Join the push rod to the locking clip and then remove the rags or newspaper from inside the door, and push the water shield back into place. Ensures the outside handle operates correctly and fits the trim panel with its related components.

Genuine Mazda RX-7 Exterior Door Handle

Outside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Exterior Door Handles found

View related parts
Mazda RX-7 Handle, Outside Part Number: 8871-59-410C
$76.04 MSRP: $101.41
You Save: $25.37 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Left, Out; Handle Outside
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1985 Mazda RX-7 | GS, S | 2 Cyl 1.1 L GAS
View related parts
Mazda RX-7 Handle, Outside Part Number: 8871-58-410C
$76.04 MSRP: $101.41
You Save: $25.37 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Right, Out; Handle Outside
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1985 Mazda RX-7 | GS, S | 2 Cyl 1.1 L GAS
View related parts
Mazda RX-7 Handle, Outside Part Number: FD15-58-410D
$263.68 MSRP: $351.64
You Save: $87.96 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle(Right), Outer; Handle Outside
- Position: Passenger Side
- Replaces: FD15-58-410C, FD15-58-410B
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1994-1995 Mazda RX-7 | Base, R2, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda RX-7 Handle, Outside Part Number: FD01-58-410D
$280.91 MSRP: $374.63
You Save: $93.72 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Right, Out; Handle Outside
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1993 Mazda RX-7 | Base, R1, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda RX-7 Handle, Outside Part Number: FD15-59-410D
$308.58 MSRP: $411.51
You Save: $102.93 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Left, Out; Handle Outside
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1994-1995 Mazda RX-7 | Base, R2, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda RX-7 Handle, Outside Part Number: FD01-59-410C
$319.01 MSRP: $425.44
You Save: $106.43 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Left, Out; Handle Outside
- Position: Driver Side
- Replaces: FD01-59-410A, FD01-59-410B, FD01-59-410
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1993 Mazda RX-7 | Base, R1, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda RX-7 Handle, Outside Part Number: FB06-59-410D-PZ
Product Specifications
- Other Name: Handle Left, Out; Handle Outside
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1990-1991 Mazda RX-7 | Base, Convertible, GTU, GTUs, GXL, GXL 2+2, Turbo | 2 Cyl 1.3 L GAS
View related parts
Mazda RX-7 Handle, Outside Part Number: FB02-58-410C-PZ
Product Specifications
- Other Name: Handle Right, Out; Handle Outside
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1990-1991 Mazda RX-7 | Base, Convertible, GTU, GTUs, GXL, GXL 2+2, Turbo | 2 Cyl 1.3 L GAS

Mazda RX-7 Exterior Door Handle

Looking for Exterior Door Handle with proven quality? Choose OEM Exterior Door Handle. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda RX-7 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine RX-7 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda RX-7 Exterior Door Handle Parts and Q&A

Handle, Outside
8871-58-410C
Q:
How to remove and install the Exterior Door Handle on Mazda RX-7?
A:
Lower the window completely and release the trim panel and all related equipment. Tease the plastic water shield from the top left corner of the door. Place some rags or old newspaper into the door cavity under the door handle assembly. This will prevent any parts or tools from falling, if accidentally dropped, to the bottom of the door. Detach the push rod from the outer handle assembly, which is secured by a plastic locking clip that you must pry away from the rod. Unfasten the two attaching nuts at the outer ends of the handle while supporting it on the outside of the door and remove it. In order to install, the studs on the outer handle are pushed through the holes of the door and attached to the two nuts. Join the push rod to the locking clip and then remove the rags or newspaper from inside the door, and push the water shield back into place. Ensures the outside handle operates correctly and fits the trim panel with its related components.