How to adjust the vertical and front-to-rear positioning of a window regulator on Mazda RX-7?

In order to vertically adjust the window, I have to take it to the completely up position and loosen the two regulator attaching bolts on the back side of the door. The regulator guide may be moved up or down, with these bolts loose. Once it has been adjusted, tighten the bolts and make sure that the glass slides slowly. To make a front to rear adjustment of the door glass, loosen the adjusting bolt on the front of the door. The glass guide can be moved where necessary with this bolt loosened. Lastly, screw the bolt and ensure that when operating the window, the piece of glass moves freely in an up and down motion.

How to remove and reinstall the door trim panel and window regulator on Mazda RX-7?

Remove the door trim panel and the inner handle assembly, which is secured with two bolts and a lock tab. Gently peel the plastic water shield away from the door metal, ensuring it remains glued along the bottom. Temporarily install the window winder handle onto the crank to adjust the window, raising the glass about two inches above the bottom window frame while still allowing access to the top of the glass. At the bottom inside the door, locate and remove the two screws and screw grommets that attach the window glass to the regulator, supporting the top of the glass during this process. Once free from the regulator, lift the glass out of the channel. Remove the six bolts across the middle of the door panel that secure the regulator, then take out the regulator through the large access hole at the bottom of the door. To reinstall, lift the regulator until the holes align, then install and tighten all six bolts. Push the window glass through the door frame until the holes in the glass align with those in the regulator, and install the two attaching bolts and grommets. Temporarily install the window winder crank to check for proper operation and make adjustments as needed. Finally, reattach the water shield to the door panel using new weatherstrip adhesive if necessary, and install the inner handle assembly along with the trim panel.

Genuine Mazda RX-7 Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Window Regulators found

View related parts
Mazda RX-7 Window Regulator Part Number: 8871-58-560A
$167.59 MSRP: $223.49
You Save: $55.90 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator-Right, Window; Regulator
- Position: Right
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1984-1985 Mazda RX-7 | GS, GSL, GSL-SE, S | 2 Cyl 1.1 L GAS, 2 Cyl 1.3 L GAS
View related parts
Mazda RX-7 Window Regulator Part Number: FB05-58-560J
$496.86 MSRP: $667.95
You Save: $171.09 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator-Right, Window; Regulator
- Position: Right
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1986-1991 Mazda RX-7 | 10th Anniversary, Base, Base 2+2, Convertible, GTU, GTUs, GXL, GXL 2+2, LX, LX 2+2, SE, SE 2+2, Sport, Turbo | 2 Cyl 1.3 L GAS
View related parts
Mazda RX-7 Window Regulator Part Number: FB05-59-560J
$525.80 MSRP: $706.86
You Save: $181.06 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator-Left, Window; Regulator
- Position: Left
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1986-1991 Mazda RX-7 | 10th Anniversary, Base, Base 2+2, Convertible, GTU, GTUs, GXL, GXL 2+2, LX, LX 2+2, SE, SE 2+2, Sport, Turbo | 2 Cyl 1.3 L GAS
View related parts
Mazda RX-7 Window Regulator Part Number: FD01-58-560C
$508.78 MSRP: $683.99
You Save: $175.21 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator-Right, Window
- Position: Right
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1993 Mazda RX-7 | Base, R1, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda RX-7 Window Regulator Part Number: FB67-59-560B
$571.13 MSRP: $767.80
You Save: $196.67 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator-Left, Window; Regulator
- Position: Left
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1990 Mazda RX-7 | Convertible, GTU, GTUs, GXL, GXL 2+2, Turbo | 2 Cyl 1.3 L GAS
View related parts
Mazda RX-7 Window Regulator Part Number: FB67-58-560B
$584.91 MSRP: $786.32
You Save: $201.41 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator-Right, Window; Regulator
- Position: Right
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1990 Mazda RX-7 | Convertible, GTU, GTUs, GXL, GXL 2+2, Turbo | 2 Cyl 1.3 L GAS
View related parts
Mazda RX-7 Window Regulator Part Number: FB67-58-560E
$614.26 MSRP: $839.32
You Save: $225.06 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator-Right, Window; Window Regulator
- Position: Right
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1989-1991 Mazda RX-7 | Convertible | 2 Cyl 1.3 L GAS
View related parts
Mazda RX-7 Window Regulator Part Number: FB67-59-560E
$614.26 MSRP: $839.32
You Save: $225.06 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator-Left, Window; Window Regulator
- Position: Left
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1989-1991 Mazda RX-7 | Convertible | 2 Cyl 1.3 L GAS
View related parts
Mazda RX-7 Window Regulator Part Number: FB01-58-560E
$21.44 MSRP: $28.14
You Save: $6.70 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator, Right Window; Regulator
- Position: Right
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1986-1990 Mazda RX-7 | 10th Anniversary, Base, Base 2+2, Convertible, GTU, GTUs, GXL, GXL 2+2, LX, LX 2+2, SE, SE 2+2, Sport, Turbo | 2 Cyl 1.3 L GAS
View related parts
Mazda RX-7 Window Regulator Part Number: 8871-59-560A
Product Specifications
- Other Name: Regulator-Left, Window; Regulator
- Position: Left
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1984-1985 Mazda RX-7 | GS, GSL, GSL-SE, S | 2 Cyl 1.1 L GAS, 2 Cyl 1.3 L GAS
View related parts
Mazda RX-7 Window Regulator Part Number: FB01-59-560E
Product Specifications
- Other Name: Regulator Left, Window; Regulator
- Position: Left
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1986-1990 Mazda RX-7 | 10th Anniversary, Base, Base 2+2, Convertible, GTU, GTUs, GXL, GXL 2+2, LX, LX 2+2, SE, SE 2+2, Sport, Turbo | 2 Cyl 1.3 L GAS

Mazda RX-7 Window Regulator

Looking for Window Regulator with proven quality? Choose OEM Window Regulator. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda RX-7 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine RX-7 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda RX-7 Window Regulator Parts and Q&A

Window Regulator
FB05-58-560J
Q: How to adjust the vertical and front-to-rear positioning of a window regulator on Mazda RX-7?
A:
In order to vertically adjust the window, I have to take it to the completely up position and loosen the two regulator attaching bolts on the back side of the door. The regulator guide may be moved up or down, with these bolts loose. Once it has been adjusted, tighten the bolts and make sure that the glass slides slowly. To make a front to rear adjustment of the door glass, loosen the adjusting bolt on the front of the door. The glass guide can be moved where necessary with this bolt loosened. Lastly, screw the bolt and ensure that when operating the window, the piece of glass moves freely in an up and down motion.
Window Regulator
FB67-58-560B
Q: How to remove and reinstall the door trim panel and window regulator on Mazda RX-7?
A:
Remove the door trim panel and the inner handle assembly, which is secured with two bolts and a lock tab. Gently peel the plastic water shield away from the door metal, ensuring it remains glued along the bottom. Temporarily install the window winder handle onto the crank to adjust the window, raising the glass about two inches above the bottom window frame while still allowing access to the top of the glass. At the bottom inside the door, locate and remove the two screws and screw grommets that attach the window glass to the regulator, supporting the top of the glass during this process. Once free from the regulator, lift the glass out of the channel. Remove the six bolts across the middle of the door panel that secure the regulator, then take out the regulator through the large access hole at the bottom of the door. To reinstall, lift the regulator until the holes align, then install and tighten all six bolts. Push the window glass through the door frame until the holes in the glass align with those in the regulator, and install the two attaching bolts and grommets. Temporarily install the window winder crank to check for proper operation and make adjustments as needed. Finally, reattach the water shield to the door panel using new weatherstrip adhesive if necessary, and install the inner handle assembly along with the trim panel.