How to remove and install a sunroof on Mazda Millenia?

In order to take off the sunroof, it is necessary to move the sunshade to the very back position and close the glass sliding panel completely. The second thing to do is to remove the left, right and lower trim covers on the perimeter of the sunroof and then remove the installation nuts on the sliding sunroof panel and the lower panel. The sliding panel is removed by pushing it into the inside of the vehicle. Close out the sunshade completely, with the handle of the manual operation, and adjust the sunshade to the rear to an approximate distance of 0.19-0.39 inch (5-10 mm). With a pry tool, raise the sunshade stopper on the back of the cable holder, remove the stopper and then slide the sunshade all the way towards the front. Turn the handle to the full opening of the lower panel keeping sunshade fully closed. Partly open the sunshade, take off the set plate cap and pull the sunshade out of the set plate notch to get it out of the vehicle. To install it, be sure to install the slide panel to the lower panel and tighten the mounting screws securely and then set the plate cap and the trim panel around it. Lastly, test the sunroof and ensure it works properly and adjust accordingly.

Genuine Mazda Sunroof

Moonroof

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Sunroofs found

View related parts
Mazda Sunroof Assembly Part Number: DM0P-69-830-75
$849.85 MSRP: $1161.23
You Save: $311.38 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame, Sliding Roof; Sunroof Assembly
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Glass Assembly Part Number: LC71-69-810A
$450.28 MSRP: $605.34
You Save: $155.06 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel, Sliding Roof
Fits the following Mazda Models:
- MPV | 2000-2001 | DX, ES, LX | 6 Cyl 2.5 L GAS
View related parts
Mazda Glass Assembly Part Number: GE5B-69-810
$613.12 MSRP: $824.25
You Save: $211.13 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel, Sliding Roof
Fits the following Mazda Models:
- Protege5 | 2002-2003 | Base | 4 Cyl 2.0 L GAS
View related parts
Mazda Glass Assembly Part Number: GE4V-69-810D
$69.24 MSRP: $90.88
You Save: $21.64 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel, Sliding Roof
Fits the following Mazda Models:
- Protege | 1999-2003 | DX, ES, LX, Mazdaspeed, MP3 | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Mazda Glass Assembly Part Number: EC03-69-810A
Product Specifications
- Other Name: Panel, Sliding Roof
Fits the following Mazda Models:
- Tribute | 2008, 2001-2005 | DX, ES, i, LX, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Glass Assembly Part Number: FF23-69-810
Product Specifications
- Other Name: Panel, Sliding Roof
Fits the following Mazda Models:
- RX-8 | 2004-2011 | 40th Anniversary Edition, Base, Grand Touring, R3, Shinka, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Glass Assembly Part Number: LD49-69-810B
Product Specifications
- Other Name: Panel, Sliding Roof
Fits the following Mazda Models:
- MPV | 2002-2006 | ES, LX, LX-SV | 6 Cyl 3.0 L GAS
View related parts
Mazda Glass Panel Part Number: TA02-69-810C
Product Specifications
- Other Name: Panel, Sliding Roof
Fits the following Mazda Models:
- Millenia | 1995-1996 | Base, L, S | 6 Cyl 2.3 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda Glass Assembly Part Number: ZZC0-69-810
Product Specifications
- Other Name: Panel, Sliding Roof
Fits the following Mazda Models:
- Tribute | 2008 | i, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Glass Assembly Part Number: ZZD0-69-810
Product Specifications
- Other Name: Panel, Sliding Roof
Fits the following Mazda Models:
- Tribute | 2009-2011 | Hybrid, i, S | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

Mazda Sunroof

Every part of the car is important. Your vehicle's performance will be compromised if something goes wrong with the Mazda Sunroof. Therefore, for your smooth driving and safety, you need regular checks and timely replacements. Whenever you need replacements, opt for genuine Mazda Sunroofs. Because they meet the manufacturer's criteria, it guarantees that replacements fit perfectly. Thus, these make better choices for people who care about driving. Why should you shop at MazdaPartsNow.com? We sell genuine Mazda Sunroofs. In our online catalog, there is a wide range of different parts. These are delivered directly from authorized Mazda dealers only so that customers can be sure of their security throughout any transaction while using our website. Furthermore, you can also quickly search for OEM parts you want because of our user-friendly site navigation. Choose us for a genuine Mazda Sunroof that keeps your car running like new.

Mazda Sunroof Parts and Q&A

Glass Panel
TA02-69-810C
Q: How to remove and install a sunroof on Mazda Millenia?
A:
In order to take off the sunroof, it is necessary to move the sunshade to the very back position and close the glass sliding panel completely. The second thing to do is to remove the left, right and lower trim covers on the perimeter of the sunroof and then remove the installation nuts on the sliding sunroof panel and the lower panel. The sliding panel is removed by pushing it into the inside of the vehicle. Close out the sunshade completely, with the handle of the manual operation, and adjust the sunshade to the rear to an approximate distance of 0.19-0.39 inch (5-10 mm). With a pry tool, raise the sunshade stopper on the back of the cable holder, remove the stopper and then slide the sunshade all the way towards the front. Turn the handle to the full opening of the lower panel keeping sunshade fully closed. Partly open the sunshade, take off the set plate cap and pull the sunshade out of the set plate notch to get it out of the vehicle. To install it, be sure to install the slide panel to the lower panel and tighten the mounting screws securely and then set the plate cap and the trim panel around it. Lastly, test the sunroof and ensure it works properly and adjust accordingly.