How to disconnect and remove the Ignition Lock Cylinder and Trunk Lid Latch on Mazda 3?

Disconnect the cable from the negative battery terminal and remove the trunk lid trim panel. Rotate the trunk lid actuator rod mounting clip and disconnect the rod from the trunk lid key lock cylinder assembly, then disconnect the electrical connector from the lock cylinder if equipped. Remove the mounting nuts and maneuver the lock cylinder out from the trunk lid, with installation being the reverse of removal. Next, disconnect the actuator rod from the trunk lid lock cylinder and the electrical connector from the trunk lid latch. Remove the latch mounting bolts and take out the latch, with installation again being the reverse of removal.

How to access and replace the ignition lock cylinder and trunk lid latch on Mazda MX-5 Miata?

In 2005 and older, in order to reach the trunk lid latch, one will have to remove the trunk striker assembly, open the trunk and remove the trim panel, then mark around it with a line to act as a guide. Unscrew the retaining bolts and take off the latch and connect the trunk release cable. Unbolt the striker of the trunk lid, if need be. Installation is in the opposite sequence. To open the trunk lock cylinder, open the trunk and then take off the trim panel, loosen the retaining clip on the actuator rod with a pry tool and then loosen it out of the lock cylinder. Installation Take out the lock cylinder by removing the retaining bolts and installing it in reverse. In 2006 and subsequent models, pull out the trunk trim about the latch, disengage the actuator rod out of the key lock cylinder, pull off the electrical connectors, and take off the latch mounting bolts. Installation is the opposite of removal and it is necessary to make sure that the striker fits into the latch properly and this ensures that adjustments are made when necessary. In case of striker adjustment, strip the striker, loosen the bolts and place the striker such that it fits in the latch after which the bolts should be tightened. Repeat and lock the latch bolts then reattach the trunk trim. In the case of the key lock cylinder, the procedure involves removing the trim surrounding the cylinder, de-attaching the actuator rod, de-connecting the electrical lead and removing the mounting nuts so as to take out the cylinder, and the process of putting the cylinder in is the opposite.

Genuine Mazda Trunk Lid Latch

Luggage Compartment Door Lock Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

64 Trunk Lid Latches found

View related parts
Mazda Lock Part Number: BL8E-56-820
$50.61 MSRP: $67.50
You Save: $16.89 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lid; Lock Assembly
Fits the following Mazda Models:
- Protege | 2001-2003 | DX, ES, LX, Mazdaspeed, MP3 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS
- Protege5 | 2002-2003 | Base | 4 Cyl 2.0 L GAS
View related parts
Mazda Lock Part Number: GJR9-56-820
$59.18 MSRP: $78.91
You Save: $19.73 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lid; Lock
Fits the following Mazda Models:
- 6 | 2016-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Lock Part Number: NC10-56-820C
$66.36 MSRP: $88.50
You Save: $22.14 (26%)
ADD TO CART
Product Specifications
- Other Name: Lock, Lid
Fits the following Mazda Models:
- Miata | 1999-2002 | 10th Anniversary, Base, LS, SE | 4 Cyl 1.8 L GAS
View related parts
Mazda Lock Part Number: NC87-56-820B
$12.65 MSRP: $87.52
You Save: $74.87 (86%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lid
Fits the following Mazda Models:
- Miata | 2002-2005 | Base, LS, Mazdaspeed, SE, Shinsen | 4 Cyl 1.8 L GAS
View related parts
Mazda Latch Part Number: EF91-62-3A0
$86.91 MSRP: $115.90
You Save: $28.99 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch, Liftgate Glass; Latch
- Replaces: EC01-62-3A0D, EC01-62-3A0C, EC01-62-3A0B, EC01-62-3A0E, EC01-62-3A0A, EC01-62-3A0G, EC01-62-3A0F
Fits the following Mazda Models:
- Tribute | 2001-2006 | DX, ES, i, LX, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Lock Part Number: GK2A-56-820A
$81.25 MSRP: $108.35
You Save: $27.10 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lid; Lock Assembly
- Replaces: GK2A-56-820
Fits the following Mazda Models:
- 6 | 2003-2008 | i, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Lock Part Number: NA1J-56-820
$95.20 MSRP: $126.96
You Save: $31.76 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lid; Lock Actuator
Fits the following Mazda Models:
- MX-5 Miata | 2016-2023 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Lock Part Number: GSYL-56-82XA
$103.36 MSRP: $137.84
You Save: $34.48 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lid; Lock Assembly
- Replaces: GSYL-56-82X, GS3L-56-820, GS3L-56-820A
Fits the following Mazda Models:
- 6 | 2009-2017 | Grand Touring, i, S, Sport, Touring | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Lock Part Number: BHN1-56-820A
$105.64 MSRP: $140.87
You Save: $35.23 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lid; Lock, Lock Actuator
- Replaces: BHN1-56-820, BJS7-56-820
Fits the following Mazda Models:
- 3 | 2014-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Grand Touring, i Grand Touring, I Sport, i SV, I Touring, Preferred, Premium, s Grand Touring, s Touring, Select, Select Sport, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Lock Part Number: NE52-56-820A
$106.99 MSRP: $142.67
You Save: $35.68 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lid
Fits the following Mazda Models:
- MX-5 Miata | 2007-2015 | 25th Anniversary Edition, Club, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Lock Actuator Part Number: TD11-62-310B
$108.33 MSRP: $144.45
You Save: $36.12 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lift Gate; Lock Assembly
Fits the following Mazda Models:
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Lock Part Number: BDMT-62-310
$117.74 MSRP: $157.01
You Save: $39.27 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lift Gate; Lock, Lock Actuator
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- MX-30 EV | 2022-2023 | Base, Premium Plus | BATTERY EV (EV/BEV)
View related parts
Mazda Lock Part Number: C513-62-310A
$125.40 MSRP: $167.24
You Save: $41.84 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lift Gate; Lock
- Replaces: C513-62-310
Fits the following Mazda Models:
- 5 | 2012-2015 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Lock Part Number: NF79-56-820A
$127.75 MSRP: $170.36
You Save: $42.61 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lid
- Replaces: NF79-56-820
Fits the following Mazda Models:
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Lock Part Number: 1F20-82-092
$122.74 MSRP: $163.68
You Save: $40.94 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Gate; Lock
- Replaces: ZZM0-82-092
Fits the following Mazda Models:
- B2300 | 2001-2009, 1994-1997 | Base, SE, SX | 4 Cyl 2.3 L GAS
- B2500 | 1998-2001 | SE, SX, Troy Lee | 4 Cyl 2.5 L GAS
- B3000 | 1998-2007, 1994-1996 | Base, DS, SE, SX, Troy Lee | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
- B4000 | 1994-2009 | Base, DS, LE, SE, Troy Lee | 6 Cyl 4.0 L GAS
View More
View related parts
Mazda Lock Part Number: BN8P-56-820A
$21.82 MSRP: $177.60
You Save: $155.78 (88%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lid; Lock
Fits the following Mazda Models:
- 3 | 2004-2009 | i, S, SP23 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda Lock Actuator Part Number: EG21-62-310B
$142.88 MSRP: $190.53
You Save: $47.65 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lift Gate; Lock Assembly
- Replaces: EG21-62-310A, EG21-62-310
Fits the following Mazda Models:
- CX-7 | 2007-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Lock Part Number: NC88-56-820A
$152.46 MSRP: $203.33
You Save: $50.87 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lid
Fits the following Mazda Models:
- Miata | 2002-2005 | Base, LS, Mazdaspeed, SE, Shinsen | 4 Cyl 1.8 L GAS
View related parts
Mazda Lock Part Number: DM0P-62-310
$152.56 MSRP: $203.45
You Save: $50.89 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lift Gate; Lock, Lock Actuator
- Replaces: D09H-62-310
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Lock Part Number: BAN6-56-820
$146.41 MSRP: $195.26
You Save: $48.85 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Lid; Lock
Fits the following Mazda Models:
- 3 | 2007-2009 | i, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

| Page 1 of 4 |Next >

1-20 of 64 Results

Mazda Trunk Lid Latch

The Mazda Trunk Lid Latch keeps cargo safe and secure and provides drivers quick and effortless access to the rear storage area, serving as a little-known but essential keeper of each journey. Mazda has gained worldwide respect for combining spirited handling with intelligent efficiency through innovations such as Skyactiv engines, i-Activ AWD and i-Activsense safety aids to produce cars that are lively, yet economical and protective. Driving from highway to city, the vehicles are still fun to maneuver. Mazda also plays with electric and mild hybrid options, demonstrating a commitment to cleaner mobility, while the signature Kodo design turns heads with flowing lines that imply motion at rest. Inside any Mazda, drivers experience cabins designed with intuitive control and youthful energy, a balance that makes daily commutes or weekend road trips equally interesting. Equally thoughtful engineering shapes the Trunk Lid Latch, which uses a rugged metal claw and spring-loaded cam to grip a fixed striker, resisting gusts, bumps and unwanted entry until a purposeful press of a button or key signal releases it. Built from corrosion-resistant steel, the Mazda Trunk Lid Latch proves itself to withstand years of slams without squeaks, and its combination of both mechanical and available electronic triggers provides a level of reliability and modern convenience. By preventing fly-open mishaps and shielding belongings from weather and theft, this humble mechanism reflects the wider Mazda promise of safety, durability and driving fun.

You'll get great performance and real durability when you pick genuine OEM Trunk Lid Latch. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Trunk Lid Latch Parts and Q&A

Lock
G33M-62-310B
Q: How to disconnect and remove the Ignition Lock Cylinder and Trunk Lid Latch on Mazda 3?
A:
Disconnect the cable from the negative battery terminal and remove the trunk lid trim panel. Rotate the trunk lid actuator rod mounting clip and disconnect the rod from the trunk lid key lock cylinder assembly, then disconnect the electrical connector from the lock cylinder if equipped. Remove the mounting nuts and maneuver the lock cylinder out from the trunk lid, with installation being the reverse of removal. Next, disconnect the actuator rod from the trunk lid lock cylinder and the electrical connector from the trunk lid latch. Remove the latch mounting bolts and take out the latch, with installation again being the reverse of removal.
Lock
NF79-56-820A
Q: How to access and replace the ignition lock cylinder and trunk lid latch on Mazda MX-5 Miata?
A:
In 2005 and older, in order to reach the trunk lid latch, one will have to remove the trunk striker assembly, open the trunk and remove the trim panel, then mark around it with a line to act as a guide. Unscrew the retaining bolts and take off the latch and connect the trunk release cable. Unbolt the striker of the trunk lid, if need be. Installation is in the opposite sequence. To open the trunk lock cylinder, open the trunk and then take off the trim panel, loosen the retaining clip on the actuator rod with a pry tool and then loosen it out of the lock cylinder. Installation Take out the lock cylinder by removing the retaining bolts and installing it in reverse. In 2006 and subsequent models, pull out the trunk trim about the latch, disengage the actuator rod out of the key lock cylinder, pull off the electrical connectors, and take off the latch mounting bolts. Installation is the opposite of removal and it is necessary to make sure that the striker fits into the latch properly and this ensures that adjustments are made when necessary. In case of striker adjustment, strip the striker, loosen the bolts and place the striker such that it fits in the latch after which the bolts should be tightened. Repeat and lock the latch bolts then reattach the trunk trim. In the case of the key lock cylinder, the procedure involves removing the trim surrounding the cylinder, de-attaching the actuator rod, de-connecting the electrical lead and removing the mounting nuts so as to take out the cylinder, and the process of putting the cylinder in is the opposite.