How to access the tail light housing on Mazda 3?

In order to reach the taillight housing, begin by popping out the plastic push pins on each side of the trunk panel and pushing out the panel. In the case of liftgate models, the service hole cover of the liftgate trim panel is the only part that should be removed to get access. Then, unfold the trunk floor carpeting mat, remove the trunk side push pins that are flexible trunk side trim panel, which covers the taillight housing and wheel housing and then pull off and reattach the flexible trunk side panel, but do not leave the trunk side panel folded too long or it would become permanently deformed. Unscrew the electrical connections of the housing of taillight and then unscrew the three nuts attached to the housing of the taillight and remove the housing. To take out the back-up light housing with the trunk lid trim panel, or simply the cover over the service hole in the case of liftgate models. Unplug the electrical connector on the back-up light bulb socket, unscrew the mounting nuts and unscrew the housing out of the trunk lid. Both housings are fitted in the opposite manner of dismantling.

How to access and remove the tail light housing on Mazda 6?

To reach the taillight housing, first open the trunk floor carpeting mat and then pull out the inferior trunk side trim panel which covers the taillight housing and wheelhousing, but ensure that the trunk side panel is not bent over a lasting duration, otherwise it will become permanently damaged. The second step shall be to disconnect the electrical connectors into the taillight housing, then loosen the nuts of the housing and remove the taillight housing. In the case of the trunk lid taillight housing, the trunk lid trim panel should be removed when it is fitted, and the electrical connector should be detached to the bulb holders, and the mounting nuts of the light housing are removed, to remove the housing of the trunk lid. Both components can be so easily installed with the opposite being uninstallation.

Genuine Mazda Tail Light

Tail Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

291 Tail Lights found

View related parts
Mazda Tail Lamp Assembly Part Number: BGDP-51-160A
$670.83 MSRP: $916.62
You Save: $245.79 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Left), Rear Combination; Tail Lamp Assembly
- Position: Left
Fits the following Mazda Models:
- 3 | 2022-2024 | 2.5 Carbon Turbo, 2.5 Turbo, 2.5 Turbo Premium Plus, Carbon Edition, Premium | 4 Cyl 2.5 L GAS
View related parts
Mazda Combination Lamp Assy Part Number: EG21-51-150H
$680.10 MSRP: $929.28
You Save: $249.18 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Right), Rear Combination
- Position: Right
- Replaces: EG21-51-150E, EG21-51-150G, EG21-51-150F
Fits the following Mazda Models:
- CX-7 | 2007-2009 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
View related parts
Mazda Combination Lamp Assy Part Number: EG21-51-160H
$680.10 MSRP: $929.28
You Save: $249.18 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Left), Rear Combination
- Position: Left
- Replaces: EG21-51-160G, EG21-51-160E, EG21-51-160F
Fits the following Mazda Models:
- CX-7 | 2007-2009 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
View related parts
Mazda Tail Lamp Assembly Part Number: BCKD-51-160A
$741.58 MSRP: $1013.28
You Save: $271.70 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Left), Rear Combination; Tail Lamp Assembly
- Position: Left
- Replaces: BCKD-51-160
Fits the following Mazda Models:
- 3 | 2020-2021 | 2.5 Turbo, 2.5 Turbo Premium Plus, Premium | 4 Cyl 2.5 L GAS
View related parts
Mazda Tail Lamp Assembly Part Number: BCKD-51-150A
$747.15 MSRP: $1020.90
You Save: $273.75 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Right), Rear Combination; Tail Lamp Assembly
- Position: Right
- Replaces: BCKD-51-150
Fits the following Mazda Models:
- 3 | 2020-2021 | 2.5 Turbo, 2.5 Turbo Premium Plus, Premium | 4 Cyl 2.5 L GAS
View related parts
Mazda Tail Lamp Assembly Part Number: BGED-51-150B
$780.87 MSRP: $1066.98
You Save: $286.11 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Right), Rear Combination; Tail Lamp Assembly
- Position: Right
- Replaced by: BGED-51-150C
Fits the following Mazda Models:
- 3 | 2022-2024 | 2.5 Carbon Turbo, 2.5 Turbo, 2.5 Turbo Premium Plus, Premium | 4 Cyl 2.5 L GAS
View related parts
Mazda Tail Lamp Assembly Part Number: BGED-51-160B
$781.46 MSRP: $1067.78
You Save: $286.32 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Left), Rear Combination; Tail Lamp Assembly
- Position: Left
- Replaced by: BGED-51-160C
Fits the following Mazda Models:
- 3 | 2022-2024 | 2.5 Carbon Turbo, 2.5 Turbo, 2.5 Turbo Premium Plus, Premium | 4 Cyl 2.5 L GAS
View related parts
Mazda Combination Lamp Assy Part Number: EH44-51-160F
$811.92 MSRP: $1109.41
You Save: $297.49 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Left), Rear Combination
- Position: Left
- Replaces: EH44-51-160A, EH44-51-160C, EH44-51-160E, EH44-51-160B, EH44-51-160D
Fits the following Mazda Models:
- CX-7 | 2010-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Combination Lamp Assy Part Number: EH44-51-150F
$811.93 MSRP: $1109.42
You Save: $297.49 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Right), Rear Combination
- Position: Right
- Replaces: EH44-51-150B, EH44-51-150C, EH44-51-150D, EH44-51-150A, EH44-51-150E
Fits the following Mazda Models:
- CX-7 | 2010-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Tail Lamp Assembly Part Number: DM6F-51-160A
$819.45 MSRP: $1119.69
You Save: $300.24 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Left), Rear Combination; Tail Lamp Assembly
- Position: Left
- Replaces: DM6F-51-160
Fits the following Mazda Models:
- CX-3 | 2019-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Tail Lamp Assembly Part Number: DM6F-51-150A
$821.11 MSRP: $1121.96
You Save: $300.85 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Right), Rear Combination; Tail Lamp Assembly
- Position: Right
- Replaces: DM6F-51-150
Fits the following Mazda Models:
- CX-3 | 2019-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Tail Lamp Assembly Part Number: FF14-51-150G
$849.61 MSRP: $1160.90
You Save: $311.29 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Right), Rear Combination; Tail Lamp
- Position: Right
- Replaces: FF14-51-150E, FF14-51-150D, FF14-51-170D, FF14-51-150F, FF14-51-170G, FF14-51-170F
Fits the following Mazda Models:
- RX-8 | 2009-2011 | Grand Touring, R3, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Tail Lamp Assembly Part Number: FF14-51-160G
$870.23 MSRP: $1189.06
You Save: $318.83 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Left), Rear Combination; Tail Lamp
- Position: Left
- Replaces: FF14-51-180D, FF14-51-180E, FF14-51-160E, FF14-51-160F, FF14-51-160D, FF14-51-180F
Fits the following Mazda Models:
- RX-8 | 2009-2011 | Grand Touring, R3, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Tail Lamp Assembly Part Number: GRF5-51-160B
$907.70 MSRP: $1240.29
You Save: $332.59 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Left), Rear Combination; Tail Lamp Assembly
- Position: Left
- Replaces: GRF5-51-160, GRF5-51-160A
Fits the following Mazda Models:
- 6 | 2018-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Tail Lamp Assembly Part Number: GRF5-51-150B
$919.88 MSRP: $1256.91
You Save: $337.03 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Right), Rear Combination; Tail Lamp Assembly
- Position: Right
- Replaces: GRF5-51-150, GRF5-51-150A
Fits the following Mazda Models:
- 6 | 2018-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Tail Lamp Assembly Part Number: GRF8-51-150B
$1082.70 MSRP: $1479.39
You Save: $396.69 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Right), Rear Combination; Tail Lamp Assembly
- Position: Right
- Replaces: GRF8-51-150A, GRF8-51-150
Fits the following Mazda Models:
- 6 | 2018-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Tail Lamp Assembly Part Number: GRF8-51-160B
$1088.07 MSRP: $1486.73
You Save: $398.66 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Left), Rear Combination; Tail Lamp Assembly
- Position: Left
- Replaces: GRF8-51-160A, GRF8-51-160
Fits the following Mazda Models:
- 6 | 2018-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Tail Lamp Assembly Part Number: VA40-51-3F0
$76.30 MSRP: $101.75
You Save: $25.45 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Right), Trunk Lid; Tail Lamp Assembly
- Position: Right
Fits the following Mazda Models:
- CX-50 | 2023-2024 | 2.5 S, 2.5 Turbo | 4 Cyl 2.5 L GAS
View related parts
Mazda Tail Lamp Assembly Part Number: VA40-51-3G0
$80.39 MSRP: $107.20
You Save: $26.81 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Left), Trunk Lid; Tail Lamp Assembly
- Position: Left
Fits the following Mazda Models:
- CX-50 | 2023-2024 | 2.5 S, 2.5 Turbo | 4 Cyl 2.5 L GAS
View related parts
Mazda Tail Lamp Assembly Part Number: KD53-51-3F0E
$82.08 MSRP: $109.46
You Save: $27.38 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp(Right), Trunk Lid; Tail Lamp Assembly
- Position: Right
- Replaced by: KD53-51-3F0F
- Replaces: KD53-51-3F0A, KD53-51-3F0D, KD53-51-3F0C, KD53-51-3F0B
Fits the following Mazda Models:
- CX-5 | 2013-2016 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS

| Page 1 of 15 |Next >

1-20 of 291 Results

Mazda Tail Light

Every part of the car is important. Your vehicle's performance will be compromised if something goes wrong with the Mazda Tail Light. Therefore, for your smooth driving and safety, you need regular checks and timely replacements. Whenever you need replacements, opt for genuine Mazda Tail Lights. Because they meet the manufacturer's criteria, it guarantees that replacements fit perfectly. Thus, these make better choices for people who care about driving. Why should you shop at MazdaPartsNow.com? We sell genuine Mazda Tail Lights. In our online catalog, there is a wide range of different parts. These are delivered directly from authorized Mazda dealers only so that customers can be sure of their security throughout any transaction while using our website. Furthermore, you can also quickly search for OEM parts you want because of our user-friendly site navigation. Choose us for a genuine Mazda Tail Light that keeps your car running like new.

Mazda Tail Light Parts and Q&A

Backup Lamp Assembly
BAP8-51-3G0
Q: How to access the tail light housing on Mazda 3?
A:
In order to reach the taillight housing, begin by popping out the plastic push pins on each side of the trunk panel and pushing out the panel. In the case of liftgate models, the service hole cover of the liftgate trim panel is the only part that should be removed to get access. Then, unfold the trunk floor carpeting mat, remove the trunk side push pins that are flexible trunk side trim panel, which covers the taillight housing and wheel housing and then pull off and reattach the flexible trunk side panel, but do not leave the trunk side panel folded too long or it would become permanently deformed. Unscrew the electrical connections of the housing of taillight and then unscrew the three nuts attached to the housing of the taillight and remove the housing. To take out the back-up light housing with the trunk lid trim panel, or simply the cover over the service hole in the case of liftgate models. Unplug the electrical connector on the back-up light bulb socket, unscrew the mounting nuts and unscrew the housing out of the trunk lid. Both housings are fitted in the opposite manner of dismantling.
Lens & Housing
GK2A-51-150C
Q: How to access and remove the tail light housing on Mazda 6?
A:
To reach the taillight housing, first open the trunk floor carpeting mat and then pull out the inferior trunk side trim panel which covers the taillight housing and wheelhousing, but ensure that the trunk side panel is not bent over a lasting duration, otherwise it will become permanently damaged. The second step shall be to disconnect the electrical connectors into the taillight housing, then loosen the nuts of the housing and remove the taillight housing. In the case of the trunk lid taillight housing, the trunk lid trim panel should be removed when it is fitted, and the electrical connector should be detached to the bulb holders, and the mounting nuts of the light housing are removed, to remove the housing of the trunk lid. Both components can be so easily installed with the opposite being uninstallation.