Genuine Mazda Tribute Shift Knob

Mazda Tribute Shift Knob Parts and Q&A

• Shift Knob
  ZZCA-46-030A
  Q: How to remove and install the shift knob and bezel on Mazda Tribute?

  A:

  The 2013 and subsequent model works the same way and the process starts with the drawing up of the parking brake lever. Tear away the clips, next, with the help of a flat-tipped screwdriver or trim tool, pry at the rear of the shifter bezel, being careful not to scrape the pieces off. Disconnect the electrical connector of the shift bezel, then electrical connector on the bottom of the shift knob. Unscrew two screws holding the shift knob and the shift lever assembly then remove the shift knob boot and bezel. The tab on the shift knob should be pushed down to take the boot and bezel off the shift knob. Lastly, the process of installing is the opposite of the process of removing.