How to remove and install the Windshield Washer Fluid Reservoir on Mazda Millenia?

In order to take out the front washer fluid reservoir, begin by unconnecting the negative battery cable. Should any be required, remove the radiator coolant reservoir, and then the retaining bolts on the washer reservoir. Before removing the washer reservoir assembly, disconnect the electrical connector and hose with the reservoir. To install, repeat the reverse of the uninstallation instructions. To access the rear washer fluid reservoir, start with the negative battery cable that should be disconnected first and then the right-hand lower trunk side trim panel should be removed. Unscrew the refill cap and switch off the support by removing it off the refill hose. Pull out the electrical connector and unscrew the hose and then pull out the rear washer reservoir. The removal process is reversed followed by an installation.

How to disconnect and remove the wiper motor,Windshield Washer Fluid Reservoir and Windshield Washer Nozzle on Mazda Tribute?

Unplug the negative device battery. To access the wiper motor windscreen, detach the nut that secures the wiper arm. Afterwards, use paint to mark the position of the shafts to the wiper arms. Lastly, remove the wipers arms. In the event of a jam, utilize a miniature puller. To remove windshield wiper motor/linkage assembly, first disconnect the wiper motor harness connector, remove the cowl cover and remove the mounting bolts. To remove the motor assembly from the cowl area, lift it up and mark the position of the motor arm to the shaft. Remove linkage, arm and mounting bolts to detach the motor from the bracket. The installation consists of the removal steps done in the reverse order with the markings made correctly aligned. When battery is reconnected, Powertrain Control Module must relearn idle and fuel trim strategy for optimal efficiency and performance. For models after 2013, unbolt the bolts on the motor assembly and lift it so the electrical connection breaks. Remove the motor assembly afterwards. To access the rear window wiper motor, remove the rear window wiper arm, its protective cover and nut. After, open the liftgate to remove the motor's plastic cover. To take out the rear window wiper motor, disconnect the electrical connector, remove mounting nut and bolt(s). The installation process is simply the reverse of the removal procedure. The battery must be reconnected, and the Powertrain Control Module must relearn idle and fuel trim strategy. To access the windshield washer nozzles, you should first locate and remove the fasteners holding the insulation in the hood. Then, remove the hose on the nozzle and press on the outer tabs to remove the nozzle. The process of installation is reverse to that of removal. To remove the washer pump motor, unbolt the passenger's side inner fender splash shield, drain the washer bottle, disconnect the electrical connectors and hoses, tip pump motor out then pull up. The process of installation is opposite to removal. To access the washer fluid reservoir, you will need to take off the passenger's side inner fender splash shield. From there, you can drain the washer bottle, disconnect electrical and hose connections, remove the plastic retainer and take out the mounting bolts. Finally pull the washer bottle through the passenger's side wheel well. Installation process is just the reverse of the removal process.

Genuine Mazda Windshield Washer Fluid Reservoir

Windshield Washer Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

106 Windshield Washer Fluid Reservoirs found

View related parts
Mazda Reservoir Part Number: K031-67-481
$44.24 MSRP: $58.99
You Save: $14.75 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Washer; Washer Reservoir
Fits the following Mazda Models:
- CX-5 | 2017-2025 | 2.5 Carbon Turbo, 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Reservoir Part Number: BCKB-67-481
$22.05 MSRP: $29.41
You Save: $7.36 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Washer; Washer Reservoir
Fits the following Mazda Models:
- 3 | 2019-2025 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Reservoir Part Number: DGJ1-67-480
$68.45 MSRP: $91.29
You Save: $22.84 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Washer; Washer Reservoir
Fits the following Mazda Models:
- CX-30 | 2020-2025 | 2.5 Carbon Turbo, 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Reservoir Part Number: GS3L-67-481A
$15.90 MSRP: $21.20
You Save: $5.30 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Washer
Fits the following Mazda Models:
- 6 | 2009-2013 | S, i | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Reservoir Part Number: GHR1-67-481
$34.48 MSRP: $45.98
You Save: $11.50 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Washer
Fits the following Mazda Models:
- 6 | 2014-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Reservoir Part Number: D11B-67-481
$28.81 MSRP: $38.42
You Save: $9.61 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Washer; Washer Reservoir
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Washer Reservoir Part Number: BJT6-67-481
$54.16 MSRP: $72.23
You Save: $18.07 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Washer
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, I Sport, I Touring, Sport, Touring, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Reservoir Assembly Part Number: NE51-67-480B
$116.31 MSRP: $155.11
You Save: $38.80 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Washer Front
- Replaces: NE51-67-480A
Fits the following Mazda Models:
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, SV, Special Edition, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Reservoir Assembly Part Number: TK78-67-481
$77.39 MSRP: $103.20
You Save: $25.81 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Washer
Fits the following Mazda Models:
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
View related parts
Mazda Reservoir Part Number: NA1J-67-481
$89.13 MSRP: $118.86
You Save: $29.73 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Washer; Reservoir Tank
Fits the following Mazda Models:
- MX-5 Miata | 2016-2025 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Reservoir Assembly Part Number: VA45-67-480
$65.85 MSRP: $87.81
You Save: $21.96 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Washer; Reservoir
Fits the following Mazda Models:
- CX-50 | 2023-2025 | 2.5 S, 2.5 Turbo, Hybrid Preferred, Hybrid Premium | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
View related parts
Mazda Reservoir Assembly Part Number: TK79-67-481
$76.25 MSRP: $101.69
You Save: $25.44 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Washer
Fits the following Mazda Models:
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
View related parts
Mazda Reservoir Part Number: BCKA-67-481
$37.65 MSRP: $50.21
You Save: $12.56 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Washer
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Tank, Washer Part Number: KR9P-67-481A
$63.11 MSRP: $84.17
You Save: $21.06 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: TANK,WASHER; Reservoir, Reservoir Assembly
- Replaces: KR9P-67-481
Fits the following Mazda Models:
- CX-70 | 2025 | PHEV, Turbo, Turbo S | 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.3 L MILD HYBRID EV-GAS (MHEV)
- CX-90 | 2024-2025 | PHEV, Turbo, Turbo S | 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.3 L MILD HYBRID EV-GAS (MHEV)
View related parts
Mazda Reservoir Part Number: KD35-67-481
$70.56 MSRP: $94.10
You Save: $23.54 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Washer; Washer Reservoir
Fits the following Mazda Models:
- CX-5 | 2013-2025 | 2.5 Carbon Turbo, 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Washer Reservoir Part Number: D651-67-481
$38.86 MSRP: $51.83
You Save: $12.97 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Washer
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Reservoir Part Number: DB4G-67-481
$27.98 MSRP: $37.30
You Save: $9.32 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Washer; Washer Reservoir
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Reservoir Assembly Part Number: T002-67-480B
$81.65 MSRP: $604.68
You Save: $523.03 (87%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Washer-Front
Fits the following Mazda Models:
- Millenia | 1995-2002 | Base, L, Millennium Edition, S | 6 Cyl 2.3 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda Reservoir Part Number: GN3K-67-481
$24.36 MSRP: $32.49
You Save: $8.13 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Washer
Fits the following Mazda Models:
- 6 | 2006-2008 | Mazdaspeed, S, i | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Washer Reservoir Part Number: DR62-67-481C
$32.55 MSRP: $43.41
You Save: $10.86 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Washer
- Replaces: DR62-67-481B, DR62-67-481A
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS

| Page 1 of 6 |Next >

1-20 of 106 Results

Mazda Windshield Washer Fluid Reservoir

The Mazda Windshield Washer Fluid Reservoir ensures that the windshield remains clear with storage and delivery of cleaning fluid to provide clear vision for drivers on every journey. Mazda cars are distinctive in their lively handling, SKYACTIV engines that sip fuel, and their graceful KODO design that makes every model look ready to pounce. The brand combines i-ACTIVSENSE driver aids and a fun steering feel, allowing a teenager or parent alike to feel safe while also feeling excited behind the wheel. Mazda is also looking at electric drives and mild hybrids, demonstrating that it wants to be green and not lose spirit. Whether cruising city streets or testing out i-ACTIV AWD on a gravel trail, Mazda makes a daily trip something to remember. Just like the engine technology strives for efficiency, the Windshield Washer Fluid Reservoir has a simple and smart formula. Made of tough plastic and tucked away safely in the engine bay, the Windshield Washer Fluid Reservoir connects to a small pump that delivers fluid through hoses to the spray nozzles the instant the driver taps the stalk. Its translucent neck indicates the level at a glance, so topping off is a matter of seconds and avoids dry runs, which can crack the case. Across the full Mazda lineup, this unobtrusive tank plays a big role in safety because a clear screen allows the driver to focus on the spirited ride the company promises.

You'll get great performance and real durability when you pick genuine OEM Windshield Washer Fluid Reservoir. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Windshield Washer Fluid Reservoir Parts and Q&A

Reservoir Assembly
T002-67-480B
Q:
How to remove and install the Windshield Washer Fluid Reservoir on Mazda Millenia?
A:
In order to take out the front washer fluid reservoir, begin by unconnecting the negative battery cable. Should any be required, remove the radiator coolant reservoir, and then the retaining bolts on the washer reservoir. Before removing the washer reservoir assembly, disconnect the electrical connector and hose with the reservoir. To install, repeat the reverse of the uninstallation instructions. To access the rear washer fluid reservoir, start with the negative battery cable that should be disconnected first and then the right-hand lower trunk side trim panel should be removed. Unscrew the refill cap and switch off the support by removing it off the refill hose. Pull out the electrical connector and unscrew the hose and then pull out the rear washer reservoir. The removal process is reversed followed by an installation.
Washer Reservoir
ZZC1-76-671A
Q:
How to disconnect and remove the wiper motor,Windshield Washer Fluid Reservoir and Windshield Washer Nozzle on Mazda Tribute?
A:
Unplug the negative device battery. To access the wiper motor windscreen, detach the nut that secures the wiper arm. Afterwards, use paint to mark the position of the shafts to the wiper arms. Lastly, remove the wipers arms. In the event of a jam, utilize a miniature puller. To remove windshield wiper motor/linkage assembly, first disconnect the wiper motor harness connector, remove the cowl cover and remove the mounting bolts. To remove the motor assembly from the cowl area, lift it up and mark the position of the motor arm to the shaft. Remove linkage, arm and mounting bolts to detach the motor from the bracket. The installation consists of the removal steps done in the reverse order with the markings made correctly aligned. When battery is reconnected, Powertrain Control Module must relearn idle and fuel trim strategy for optimal efficiency and performance. For models after 2013, unbolt the bolts on the motor assembly and lift it so the electrical connection breaks. Remove the motor assembly afterwards. To access the rear window wiper motor, remove the rear window wiper arm, its protective cover and nut. After, open the liftgate to remove the motor's plastic cover. To take out the rear window wiper motor, disconnect the electrical connector, remove mounting nut and bolt(s). The installation process is simply the reverse of the removal procedure. The battery must be reconnected, and the Powertrain Control Module must relearn idle and fuel trim strategy. To access the windshield washer nozzles, you should first locate and remove the fasteners holding the insulation in the hood. Then, remove the hose on the nozzle and press on the outer tabs to remove the nozzle. The process of installation is reverse to that of removal. To remove the washer pump motor, unbolt the passenger's side inner fender splash shield, drain the washer bottle, disconnect the electrical connectors and hoses, tip pump motor out then pull up. The process of installation is opposite to removal. To access the washer fluid reservoir, you will need to take off the passenger's side inner fender splash shield. From there, you can drain the washer bottle, disconnect electrical and hose connections, remove the plastic retainer and take out the mounting bolts. Finally pull the washer bottle through the passenger's side wheel well. Installation process is just the reverse of the removal process.