How to remove and install the A/C Evaporator Core in an air conditioning system on 1997 Mazda MPV?

Discharge A/C and disconnect negative battery. Front: drain coolant, remove passenger trim/glovebox, disconnect & plug refrigerant lines at firewall, remove grommets, thermo-switch connector and nuts, split case halves and remove evaporator. Rear: remove rear trim, disconnect lines, electricals and hoses, unbolt and remove evaporator. Reinstall reverse; refill, evacuate, recharge, leak-test.

Genuine 1997 Mazda MPV A/C Evaporator Core

A/C Evaporators

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Evaporator Cores found

View related parts
1997 Mazda MPV Core Part Number: LB4061J10
Product Specifications
- Other Name: Evaporator; Core
- Item Weight: 7.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: LB4061J10
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1997 Mazda MPV Submodels:
- DX, ES, L, LX, LXE, Passenger | 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
View related parts
1997 Mazda MPV Evaporator Assembly Part Number: LB83-61-870B
Product Specifications
- Other Name: Cooling Unit, Rear
- Item Weight: 12.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: LB83-61-870B
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1997 Mazda MPV Submodels:
- DX, ES, LX | 6 Cyl 3.0 L GAS

1997 Mazda MPV A/C Evaporator Core Parts and Q&A

Q: How to remove and install the A/C Evaporator Core in an air conditioning system on 1997 Mazda MPV?
A: Discharge A/C and disconnect negative battery. Front: drain coolant, remove passenger trim/glovebox, disconnect & plug refrigerant lines at firewall, remove grommets, thermo-switch connector and nuts, split case halves and remove evaporator. Rear: remove rear trim, disconnect lines, electricals and hoses, unbolt and remove evaporator. Reinstall reverse; refill, evacuate, recharge, leak-test.