How to replace the ignition coil on 2008 Mazda Tribute?

On 2004 and older four-cylinder engine disconnect negative battery terminal and ignition coil pack connector. Take out coil pack bolts and spark plug wires. Apply silicone on the rubber boot and replace. In 2005 and later models, do the same, but take off the engine cover and repeat the same procedure making sure PCM re-learns its idle and fuel trim strategy.

Genuine 2008 Mazda Tribute Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
2008 Mazda Tribute Ignition Coil Part Number: AJ09-18-100
$105.19 MSRP: $140.27
You Save: $35.08 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition; Coil
- Replaces: AJ03-18-100A, AJC1-18-100, AJ03-18-100B
- Item Weight: 1.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AJ09-18-100
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2008 Mazda Tribute Submodels:
- DX, ES, LX, S | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2008 Mazda Tribute Ignition Coil Part Number: ZZCA-18-100
$118.94 MSRP: $158.61
You Save: $39.67 (26%)
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition; Coil
- Replaces: LF16-18-100B, LF16-18-100A, LF16-18-100
- Item Weight: 1.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: ZZCA-18-100
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2008 Mazda Tribute Submodels:
- Hybrid, i | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS

2008 Mazda Tribute Ignition Coil Parts and Q&A

Q: How to replace the ignition coil on 2008 Mazda Tribute?
A: On 2004 and older four-cylinder engine disconnect negative battery terminal and ignition coil pack connector. Take out coil pack bolts and spark plug wires. Apply silicone on the rubber boot and replace. In 2005 and later models, do the same, but take off the engine cover and repeat the same procedure making sure PCM re-learns its idle and fuel trim strategy.