How to replace the front sway bar and front sway bar bushing on Mazda 3?

Unscrew the lug nuts in the front wheel and lift the front of the automobile in place with jackstands. Turn on the parking brake and place something in the rear wheels to prevent rolling. Take out the front tires and splash covers. Removal of steering shaft joint cover and disconnection of steering shaft with the steering gear need to be done with the help of an Allen wrench, to retain ballstud in case the nut rotates with it. Looseen the tie-rod ends of the steering knuckles. Place the crossmember on the floor with a support, loosen the lower mounting fasteners and upper mounting bolts, and raise the crossmember about 3-1/2 inches and place it on the jackstands on each side. Unscrew the stabilizer bar bushing clamps and take out the stabilizer bar out of the crossmember. When the stabilizer bar is not on, remove the retainer bushings and examine them, looking at them as to cracking, wear, or deterioration, replacing them when necessary. Wipe off the rust or dirt in the bushing zone of the stabilizer bar using a hard wire brush. Coat the internal and external surfaces of new bushing with vegetable oil to make it easier to put back together, but not with petroleum or mineral lubricants or brake fluid, which may cause the bushing to wear. The cuts of the bushings should be towards the back of the car. Installation is in the reverse sequence of removal attaching the fasteners to the required torque values.

Genuine Mazda 3 Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Sway Bar Bushings found

View related parts
Mazda 3 Bushings Part Number: BP4K-28-156E
$11.80 MSRP: $15.74
You Save: $3.94 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Stabilizer-Rear; Bushing, Stabilizer Bar Bushing
- Replaces: BP4K-28-156D, BP4K-28-156C, BP4K-28-156B
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2004-2013 Mazda 3 | i, Mazdaspeed, S, SP23 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bushings Part Number: BBM4-28-156A
$12.10 MSRP: $16.14
You Save: $4.04 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Stabilizer-Rear; Bushing
- Replaces: BBM4-28-156
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2010-2013 Mazda 3 | i, Mazdaspeed, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bushings Part Number: KD61-34-156F
$14.94 MSRP: $19.91
You Save: $4.97 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Stabilizer-Front; Bushing
- Replaces: KD61-34-156C, KD61-34-156E
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2016 Mazda 3 | i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bushings Part Number: B34S-28-156A
$15.65 MSRP: $20.88
You Save: $5.23 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Stabilizer-Rear; Bushing, Stabilizer Bar Bushing
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2007-2013 Mazda 3 | Mazdaspeed, S | 4 Cyl 2.3 L GAS
View related parts
Mazda 3 Bushings Part Number: KD31-28-156D
$12.89 MSRP: $17.19
You Save: $4.30 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Stabilizer-Rear; Bushing
- Replaces: BJS7-28-156, KD31-28-156B
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2018 Mazda 3 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bushings Part Number: B60P-34-156
$13.30 MSRP: $17.73
You Save: $4.43 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Stabilizer-Front; Bushing, Stabilizer Bar Bushing
- Replaces: BJS7-34-156, BJS7-34-156B, BJS7-34-156A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2018 Mazda 3 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bushing Part Number: BP4K-34-156B
$15.50 MSRP: $20.68
You Save: $5.18 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Stabilizer-Front; Bushing, Bushing Bracket, Stabilizer Bar Bushing
- Replaces: BP4K-34-156A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2004-2013 Mazda 3 | i, Mazdaspeed, S, SP23 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bushing Part Number: B37F-34-156B
$16.56 MSRP: $22.10
You Save: $5.54 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Stabilizer-Front; Bushing, Stabilizer Bar Bushing
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2007-2013 Mazda 3 | Mazdaspeed, S | 4 Cyl 2.3 L GAS

Mazda 3 Sway Bar Bushing

Looking for Sway Bar Bushing with proven quality? Choose OEM Sway Bar Bushing. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda 3 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine 3 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda 3 Sway Bar Bushing Parts and Q&A

Bushings
B34S-28-156A
Q: How to replace the front sway bar and front sway bar bushing on Mazda 3?
A:
Unscrew the lug nuts in the front wheel and lift the front of the automobile in place with jackstands. Turn on the parking brake and place something in the rear wheels to prevent rolling. Take out the front tires and splash covers. Removal of steering shaft joint cover and disconnection of steering shaft with the steering gear need to be done with the help of an Allen wrench, to retain ballstud in case the nut rotates with it. Looseen the tie-rod ends of the Steering Knuckles. Place the crossmember on the floor with a support, loosen the lower mounting fasteners and upper mounting bolts, and raise the crossmember about 3-1/2 inches and place it on the jackstands on each side. Unscrew the stabilizer bar bushing clamps and take out the stabilizer bar out of the crossmember. When the stabilizer bar is not on, remove the retainer bushings and examine them, looking at them as to cracking, wear, or deterioration, replacing them when necessary. Wipe off the rust or dirt in the bushing zone of the stabilizer bar using a hard wire brush. Coat the internal and external surfaces of new bushing with vegetable oil to make it easier to put back together, but not with petroleum or mineral lubricants or brake fluid, which may cause the bushing to wear. The cuts of the bushings should be towards the back of the car. Installation is in the reverse sequence of removal attaching the fasteners to the required torque values.