How to access the Tail Light Lens housing on Mazda 3?

In order to reach the Tail Light Lens, begin by popping out the plastic push pins on each side of the trunk panel and pushing out the panel. In the case of liftgate models, the service hole cover of the liftgate trim panel is the only part that should be removed to get access. Then, unfold the trunk floor carpeting mat, remove the trunk side push pins that are flexible trunk side trim panel, which covers the Tail Light Lens and wheel housing and then pull off and reattach the flexible trunk side panel, but do not leave the trunk side panel folded too long or it would become permanently deformed. Unscrew the electrical connections of the Tail Light Lens and then unscrew the three nuts attached to the Tail Light Lens and remove the Tail Light Lens. To take out the back-up light housing with the trunk lid trim panel, or simply the cover over the service hole in the case of liftgate models. Unplug the electrical connector on the back-up light bulb socket, unscrew the mounting nuts and unscrew the housing out of the trunk lid. Both housings are fitted in the opposite manner of dismantling.

How to access and remove the Tail Light Lens housing on Mazda 6?

To reach the tail light lens, first open the trunk floor carpeting mat and then pull out the inferior trunk side trim panel which covers the tail light lens and wheelhousing, but ensure that the trunk side panel is not bent over a lasting duration, otherwise it will become permanently damaged. The second step shall be to disconnect the electrical connectors into the tail light lens, then loosen the nuts of the lens and remove the tail light lens. In the case of the trunk lid tail light lens, the trunk lid trim panel should be removed when it is fitted, and the electrical connector should be detached to the bulb holders, and the mounting nuts of the tail light lens are removed, to remove the tail light lens of the trunk lid. Both components can be so easily installed with the opposite being uninstallation.

Genuine Mazda Tail Light Lens

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

123 Tail Light Lens found

View related parts
Mazda Lens & Housing Part Number: NC10-51-170C
$294.61 MSRP: $392.90
You Save: $98.29 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lens & Body Right, Rear
- Position: Passenger Side
- Replaces: NC10-51-170B, NC10-51-150C
Fits the following Mazda Models:
- Miata | 1999-2000 | 10th Anniversary, Base, LS, SE | 4 Cyl 1.8 L GAS
View related parts
Mazda Lens & Housing Part Number: GP7B-51-3J0
$84.63 MSRP: $112.86
You Save: $28.23 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lens & Housing(Left), Trunk Lid
- Position: Driver Side
Fits the following Mazda Models:
- 6 | 2006-2008 | S, i | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Lens & Housing Part Number: BAP8-51-3H0
$153.15 MSRP: $204.23
You Save: $51.08 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lens & Housing(Right), Trunk Lid
- Position: Passenger Side
- Replaces: BAP8-51-3F0
Fits the following Mazda Models:
- 3 | 2007-2009 | Mazdaspeed, S | 4 Cyl 2.3 L GAS
View related parts
Mazda Backup Lamp Assembly Part Number: BN8P-51-3J0C
$161.66 MSRP: $215.59
You Save: $53.93 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lens & Housing(Left), Trunk Lid; Lens & Housing
- Position: Driver Side
- Replaces: BN8P-51-3J0, BN8P-51-3G0, BN8P-51-3G0C, BN8P-51-3J0B, BN8P-51-3G0B
Fits the following Mazda Models:
- 3 | 2004-2006 | S, SP23, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda Backup Lamp Assembly Part Number: BN8F-51-3H0C
$161.93 MSRP: $215.94
You Save: $54.01 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lens & Housing(Right), Trunk Lid; Lens & Housing
- Position: Passenger Side
Fits the following Mazda Models:
- 3 | 2004-2006 | S, SP23 | 4 Cyl 2.3 L GAS
View related parts
Mazda Lens & Housing Part Number: N066-51-180
$199.33 MSRP: $265.81
You Save: $66.48 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lens & Body(Left), Rear Combination
- Position: Driver Side
Fits the following Mazda Models:
- Miata | 2001-2005 | Base, LS, Mazdaspeed, SE, Shinsen | 4 Cyl 1.8 L GAS
View related parts
Mazda Backup Lamp Assembly Part Number: BN8R-51-3H0C
$158.96 MSRP: $211.99
You Save: $53.03 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lens & Housing(Right), Trunk Lid; Lens & Housing
- Position: Passenger Side
- Replaces: BN8R-51-3F0B, BN8R-51-3H0, BN8R-51-3H0B, BN8R-51-3F0, BN8R-51-3F0C
Fits the following Mazda Models:
- 3 | 2004-2006 | S, SP23, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda Lens & Housing Part Number: GP7A-51-3J0
$16.69 MSRP: $112.86
You Save: $96.17 (86%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lens & Housing(Left), Trunk Lid
- Position: Driver Side
Fits the following Mazda Models:
- 6 | 2006-2008 | S, i | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Lens & Housing Part Number: GP7A-51-180
$14.94 MSRP: $98.13
You Save: $83.19 (85%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lens & Body(Left), Rear Combination
- Position: Driver Side
Fits the following Mazda Models:
- 6 | 2006-2008 | S, i | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Lens & Housing Part Number: GP7B-51-3H0
$17.18 MSRP: $112.86
You Save: $95.68 (85%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lens & Housing(Right), Trunk Lid
- Position: Passenger Side
Fits the following Mazda Models:
- 6 | 2006-2008 | S, i | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Lens & Housing Part Number: GS3L-51-3J0E
$44.14 MSRP: $58.85
You Save: $14.71 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lens & Housing(Left), Trunk Lid
- Position: Driver Side
- Replaces: GS3L-51-3J0D, GS3L-51-3J0B, GS3L-51-3J0C
Fits the following Mazda Models:
- 6 | 2009-2013 | S, i | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Lens & Housing Part Number: GS3L-51-180G
$65.84 MSRP: $87.80
You Save: $21.96 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lens & Body Left, Rear
- Position: Driver Side
- Replaces: GS3L-51-180D, GS3L-51-180C, GS3L-51-180E, GS3L-51-180B, GS3L-51-180F
Fits the following Mazda Models:
- 6 | 2009-2010 | S, i | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Lens & Housing Part Number: GP7B-51-180
$73.59 MSRP: $98.13
You Save: $24.54 (26%)
ADD TO CART
Product Specifications
- Other Name: Lens & Body(Left), Rear Combination
- Position: Driver Side
Fits the following Mazda Models:
- 6 | 2006-2008 | S, i | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Lens & Housing Part Number: BP7H-51-180
$138.51 MSRP: $184.72
You Save: $46.21 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lens & Body(Left), Rear Combination
- Position: Driver Side
- Replaces: BP7H-51-160
Fits the following Mazda Models:
- Protege | 1999-2003 | DX, ES, LX, Mazdaspeed, MP3 | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Mazda Lens & Housing Part Number: BP7H-51-170
$138.51 MSRP: $184.72
You Save: $46.21 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lens & Body(Right), Rear Combination
- Position: Passenger Side
- Replaces: BP7H-51-150
Fits the following Mazda Models:
- Protege | 1999-2003 | DX, ES, LX, Mazdaspeed, MP3 | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Mazda Backup Lamp Assembly Part Number: BAN6-51-3J0
$153.55 MSRP: $204.77
You Save: $51.22 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lens & Housing(Left), Trunk Lid; Lens & Housing
- Position: Driver Side
Fits the following Mazda Models:
- 3 | 2007-2009 | S, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda Backup Lamp Assembly Part Number: BN8P-51-3H0C
$156.03 MSRP: $208.08
You Save: $52.05 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lens & Housing(Right), Trunk Lid; Lens & Housing
- Position: Passenger Side
- Replaces: BN8P-51-3F0C, BN8P-51-3F0B, BN8P-51-3H0, BN8P-51-3H0B, BN8P-51-3F0
Fits the following Mazda Models:
- 3 | 2004-2006 | S, SP23, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda Lens & Housing Part Number: GR6K-51-170
$176.89 MSRP: $235.90
You Save: $59.01 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lens & Body(Right), Rear Combination
- Position: Passenger Side
Fits the following Mazda Models:
- 6 | 2006-2007 | S | 6 Cyl 3.0 L GAS
View related parts
Mazda Lens & Housing Part Number: L120-51-170B
$214.84 MSRP: $286.51
You Save: $71.67 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lens & Body(Right), Rear Combination
- Position: Passenger Side
- Replaces: L120-51-150, L120-51-150B, L120-51-170
Fits the following Mazda Models:
- MPV | 2002-2003 | ES, LX | 6 Cyl 3.0 L GAS
View related parts
Mazda Lens & Housing Part Number: BN8R-51-170E
$215.79 MSRP: $287.77
You Save: $71.98 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lens & Body Right, Rear
- Position: Passenger Side
- Replaces: BN8R-51-150E, BN8R-51-150C, BN8R-51-150D, BN8R-51-170C, BN8R-51-150, BN8R-51-150B, BN8R-51-170, BN8R-51-170B, BN8R-51-170D
Fits the following Mazda Models:
- 3 | 2004-2006 | i, S, SP23 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

| Page 1 of 7 |Next >

1-20 of 123 Results

Mazda Tail Light Lens

Mazda Tail Light Lens is a smart signal shield that allows drivers behind you to see your brake and turn signals instantly to keep your nighttime and bad weather driving safer. Mazda as a company has built its reputation on lively handling, efficient Skyactiv engines, and the eye-catching Kodo design language that gives every model a sense of motion even when stationary. From early rotary-powered icons to the updated hybrids, Mazda looks for a balance between fuel economy and an engaging drive, supported by i-Activsense features such as adaptive cruise and lane keeping that add to the confidence in any trip. Owners appreciate that Mazda cabins feel sporty and practical, yet the available i-Activ AWD allows them to explore twisting backroads with grip to spare. Complementing this driver-focused spirit, the Tail Light Lens applied across the lineup offers both style and safety. Molded from durable acrylic, each Tail Light Lens seals out moisture, protects fragile bulbs or LEDs, and spreads red and amber light so signals remain vivid and uniform. Due to the common brand dimensions and electrical standards, drivers can swiftly replace a cracked unit and have it back to a clean factory look without much puzzlement on compatibility. In everyday use, the Mazda lighting assembly is resistant to fading and holds up to road debris while reinforcing sleek rear contours that make every Mazda instantly recognizable after sunset.

You'll get great performance and real durability when you pick genuine OEM Tail Light Lens. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Tail Light Lens Parts and Q&A

Lens & Housing
BAP8-51-3H0
Q:
How to access the Tail Light Lens housing on Mazda 3?
A:
In order to reach the Tail Light Lens, begin by popping out the plastic push pins on each side of the trunk panel and pushing out the panel. In the case of liftgate models, the service hole cover of the liftgate trim panel is the only part that should be removed to get access. Then, unfold the trunk floor carpeting mat, remove the trunk side push pins that are flexible trunk side trim panel, which covers the Tail Light Lens and wheel housing and then pull off and reattach the flexible trunk side panel, but do not leave the trunk side panel folded too long or it would become permanently deformed. Unscrew the electrical connections of the Tail Light Lens and then unscrew the three nuts attached to the Tail Light Lens and remove the Tail Light Lens. To take out the back-up light housing with the trunk lid trim panel, or simply the cover over the service hole in the case of liftgate models. Unplug the electrical connector on the back-up light bulb socket, unscrew the mounting nuts and unscrew the housing out of the trunk lid. Both housings are fitted in the opposite manner of dismantling.
Lens & Housing
GP7B-51-3J0
Q:
How to access and remove the Tail Light Lens housing on Mazda 6?
A:
To reach the tail light lens, first open the trunk floor carpeting mat and then pull out the inferior trunk side trim panel which covers the tail light lens and wheelhousing, but ensure that the trunk side panel is not bent over a lasting duration, otherwise it will become permanently damaged. The second step shall be to disconnect the electrical connectors into the tail light lens, then loosen the nuts of the lens and remove the tail light lens. In the case of the trunk lid tail light lens, the trunk lid trim panel should be removed when it is fitted, and the electrical connector should be detached to the bulb holders, and the mounting nuts of the tail light lens are removed, to remove the tail light lens of the trunk lid. Both components can be so easily installed with the opposite being uninstallation.