How to remove and install the front washer pump motor on Mazda B2200?

In order to install and remove the front washer pump motor, it is necessary to make sure that the washer fluid reservoir is full to prevent the pump destruction. Loose the electrical plug and hose of the reservoir and, where applicable, the coolant overflow hose. Take out the screws attaching the reservoir, and remove it out of the vehicle, and drain out what is contained in it. With a small pry tool take the pump retaining ring out and with a pair of pliers take the motor and seal out. To install, wipe the pump chamber, lubricate the pump seal, and make sure the motor fits correctly in the reservoir notch by pressing. Install retaining ring, reattach reservoir assembly, reattach hoses and the electrical harness, fill up the reservoir and Leaks. To fit into the reservoir, the washer pump needs to have the mounting screws removed, hoses, the electrical connector and the reservoir removed. Empty, with care and caution remove the pump, and examine the rubber grommet. Installation requires grommet, lubricate and firmly fit the pump. Install reconnect hoses, and then attach the reservoir, screws, wiring harness, fill reservoir and check that it functions. On the Navajo models, to disassemble the rear washer pump motor leave the left side rear quarter trim panel, unscrew the filler hose, and unplug the motor connector. Unscrew the reservoir, pop out the pump and examine the seal. To install, lubricate the seal, seat the pump, attach the washer hose, place the reservoir, screw, attach connector, connect filler hose, fill with fluid and test. Install the trim panel again using the given steps. To change and install the battery in MPV models, disconnect the negative battery cable, remove the mat set end plate and right side rear trim panel, disconnect the washer fluid hose and wiring harness and remove the reservoir. Screws are loosened to take out the rear washer motor after emptying it. Installation To install, screw the motor, attach fluid hose and wiring harness, tighten the mounting screws, reconnect the battery cable, fill the reservoir, verify that it works and reassemble the trim panel and mat set end plate.

How to remove and install the washer pump motors on Mazda Millenia?

In order to replace and remove the front washer fluid motor, one needs to first of all be able to remove the negative battery cable and then the windshield washer fluid reservoir. Then remove the washer motor and pump assembly, and in a similar fashion, install it in reverse of the same step. In the case of the rear washer fluid motor, start by disconnection of the negative battery cable then disconnect the rear window washer reservoir. Then take off the motor and pump assembly the installation being the same as the take-off procedure.

Genuine Mazda Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

32 Washer Pumps found

View related parts
Mazda Washer Pump Part Number: BDTT-67-482
$21.61 MSRP: $28.82
You Save: $7.21 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Washer; Washer Pump
- Replaces: BCKB-67-482
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Washer Pump Part Number: N243-67-482
$21.84 MSRP: $29.13
You Save: $7.29 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Washer
Fits the following Mazda Models:
- MX-5 Miata | 2016-2023 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Washer Pump Part Number: EG22-67-482
$36.03 MSRP: $48.04
You Save: $12.01 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Washer; Front Washer Pump
Fits the following Mazda Models:
- 3 | 2010-2018 | Grand Touring, i, i Grand Touring, I Sport, i SV, I Touring, Mazdaspeed, S, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- CX-7 | 2007-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Washer Pump Part Number: G22C-67-482
$36.88 MSRP: $49.17
You Save: $12.29 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Washer; Washer Pump
- Position: Front
Fits the following Mazda Models:
- 3 | 2004-2009 | i, Mazdaspeed, S, SP23 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
- 5 | 2006-2010 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
- 6 | 2006-2007 | i, Mazdaspeed, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
- CX-7 | 2007-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View More
View related parts
Mazda Washer Pump Part Number: BP4K-67-482
$37.61 MSRP: $50.17
You Save: $12.56 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Washer; Washer Pump
- Position: Rear
Fits the following Mazda Models:
- 3 | 2004-2009 | i, Mazdaspeed, S, SP23 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
- 5 | 2006-2010 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
- CX-7 | 2007-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View More
View related parts
Mazda Washer Pump Part Number: GHK1-67-482
$38.14 MSRP: $50.86
You Save: $12.72 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Washer
Fits the following Mazda Models:
- 6 | 2014-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Washer Pump Part Number: BJS7-67-482
$38.51 MSRP: $51.37
You Save: $12.86 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Washer
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Washer Pump Part Number: BJT6-67-482
$38.71 MSRP: $51.62
You Save: $12.91 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Washer
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Washer Pump Part Number: NE51-67-482
$42.35 MSRP: $56.47
You Save: $14.12 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Washer
Fits the following Mazda Models:
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Washer Pump Part Number: FE01-67-482
$43.41 MSRP: $57.89
You Save: $14.48 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Washer
Fits the following Mazda Models:
- RX-8 | 2004-2011 | 40th Anniversary Edition, Base, Grand Touring, R3, Shinka, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Washer Pump Part Number: BBP1-67-482
$47.20 MSRP: $62.94
You Save: $15.74 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Washer; Front Washer Pump
Fits the following Mazda Models:
- 3 | 2010-2018 | Grand Touring, i, i Grand Touring, I Sport, i SV, I Touring, Mazdaspeed, S, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- 5 | 2012-2015 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-5 | 2013-2024 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Washer Pump Part Number: D651-67-482A
$49.80 MSRP: $66.41
You Save: $16.61 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Washer
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Washer Pump Part Number: DGH9-67-482
$51.53 MSRP: $68.72
You Save: $17.19 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Washer; Front Washer Pump, Washer Pump
- Replaces: BCKN-67-482, DA6C-67-482, D09W-67-482
Fits the following Mazda Models:
- 3 | 2021-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
- MX-30 EV | 2022-2023 | Base, Premium Plus | BATTERY EV (EV/BEV)
View More
View related parts
Mazda Washer Pump Part Number: B25D-67-482A
$74.93 MSRP: $99.92
You Save: $24.99 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Washer; Rear Washer Pump, Washer Pump
- Position: Front
- Replaces: B25D-67-482
Fits the following Mazda Models:
- Protege | 2001-2003 | DX, ES, LX, Mazdaspeed | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS
- Protege5 | 2002-2003 | Base | 4 Cyl 2.0 L GAS
- RX-7 | 1993-1995 | Base, R1, R2, Touring | 2 Cyl 1.3 L GAS
View More
View related parts
Mazda Washer Pump Part Number: S084-76-672
$79.18 MSRP: $105.58
You Save: $26.40 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Washer; Front Washer Pump, Rear Washer Pump
Fits the following Mazda Models:
- 323 | 1990-1994, 1986-1988 | Base, DX, GT, GTX, LX, SE | 4 Cyl 1.6 L GAS
- 929 | 1992-1995 | Base | 6 Cyl 3.0 L GAS
- MPV | 2000-2006, 1996-1998 | DX, ES, LX, LX-SV | 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- MX-3 | 1992-1995 | Base, GS, SE | 4 Cyl 1.6 L GAS, 6 Cyl 1.8 L GAS
- Miata | 1999-2005, 1990-1997 | 10th Anniversary, Base, LE, LS, M Edition, Mazdaspeed, SE, Shinsen, STO | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
- Millenia | 1995-2002 | Base, L, Millennium Edition, S | 6 Cyl 2.3 L GAS, 6 Cyl 2.5 L GAS
- Protege | 1990-2001 | 4WD, Base, DX, ES, LX, SE | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View More
View related parts
Mazda Washer Pump Part Number: LB83-67-482
$88.65 MSRP: $118.22
You Save: $29.57 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Washer; Front Washer Pump, Washer Pump
Fits the following Mazda Models:
- MPV | 1996-1998 | DX, ES, LX | 6 Cyl 3.0 L GAS
- Miata | 1997 | Base, M Edition, STO | 4 Cyl 1.8 L GAS
View related parts
Mazda Washer Pump Part Number: LA01-67-482
$135.49 MSRP: $180.69
You Save: $45.20 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Washer; Front Washer Pump
Fits the following Mazda Models:
- MPV | 1989-1995 | Cargo, L, LX, LXE, Passenger | 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
- Miata | 1990-1997 | Base, LE, M Edition, SE, STO | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
View related parts
Mazda Washer Pump Part Number: GA2A-67-482
$144.41 MSRP: $192.60
You Save: $48.19 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Washer; Rear Washer Pump, Washer Pump
- Position: Front
Fits the following Mazda Models:
- 626 | 1993-2002 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
- MX-6 | 1993-1997 | Base, LS, M Edition | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda Washer Pump Part Number: VA45-67-482
$16.66 MSRP: $22.22
You Save: $5.56 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Washer; Washer Pump
Fits the following Mazda Models:
- CX-50 | 2023-2024 | 2.5 S, 2.5 Turbo | 4 Cyl 2.5 L GAS
View related parts
Mazda Washer Pump Part Number: GK2A-67-482
Product Specifications
- Other Name: Pump, Washer; Front Washer Pump
Fits the following Mazda Models:
- 6 | 2003-2013 | i, S | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS

| Page 1 of 2 |Next >

1-20 of 32 Results

Mazda Washer Pump

The Mazda Washer Pump helps keep the windshield clear at a tap of the stalk, instantly sending cleaning fluid allowing every journey to be kept safe and focused. Mazda has made its name on vibrant handling, fuel-conserving Skyactiv engines, and the eye-catching Kodo styling that makes every model as agile as it is, while i-Activsense features provide confidence by watching blind zones and maintaining speed gaps. From compact hatchbacks to versatile SUVs, Mazda offers vehicles that are designed to provide a balance between efficiency and fun, and their increasing use of mild hybrids indicates their dedication to cleaner mobility without sacrificing performance. Drivers also love the way Mazda combines solid craftsmanship and intuitive controls so that daily driving feels simple and engaging instead of complicated. Just like the cars are meant to link driver to road, the Washer Pump links driver to visibility. Mounted next to a common fluid reservoir, each Washer Pump utilizes a small electric motor to pressurize a liquid then force it through hosing toward well-placed nozzles, resulting in an even spray that the wipers immediately sweep away. The design remains lightweight and compact to maintain a low mass and high reliability, and the simple operation of the switch ensures that there is no learning curve across the lineup. By restoring full pressure with each activation, the system protects the glass against abrasive grit and maintains the clean view that supports Mazda agility at any speed.

You'll get great performance and real durability when you pick genuine OEM Washer Pump. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Washer Pump Parts and Q&A

Pump
8532-76-672
Q: How to remove and install the front washer pump motor on Mazda B2200?
A:
In order to install and remove the front washer pump motor, it is necessary to make sure that the washer fluid reservoir is full to prevent the pump destruction. Loose the electrical plug and hose of the reservoir and, where applicable, the coolant overflow hose. Take out the screws attaching the reservoir, and remove it out of the vehicle, and drain out what is contained in it. With a small pry tool take the pump retaining ring out and with a pair of pliers take the motor and seal out. To install, wipe the pump chamber, lubricate the pump seal, and make sure the motor fits correctly in the reservoir notch by pressing. Install retaining ring, reattach reservoir assembly, reattach hoses and the electrical harness, fill up the reservoir and Leaks. To fit into the reservoir, the washer pump needs to have the mounting screws removed, hoses, the electrical connector and the reservoir removed. Empty, with care and caution remove the pump, and examine the rubber grommet. Installation requires grommet, lubricate and firmly fit the pump. Install reconnect hoses, and then attach the reservoir, screws, wiring harness, fill reservoir and check that it functions. On the Navajo models, to disassemble the rear washer pump motor leave the left side rear quarter trim panel, unscrew the filler hose, and unplug the motor connector. Unscrew the reservoir, pop out the pump and examine the seal. To install, lubricate the seal, seat the pump, attach the washer hose, place the reservoir, screw, attach connector, connect filler hose, fill with fluid and test. Install the trim panel again using the given steps. To change and install the battery in MPV models, disconnect the negative battery cable, remove the mat set end plate and right side rear trim panel, disconnect the washer fluid hose and wiring harness and remove the reservoir. Screws are loosened to take out the rear washer motor after emptying it. Installation To install, screw the motor, attach fluid hose and wiring harness, tighten the mounting screws, reconnect the battery cable, fill the reservoir, verify that it works and reassemble the trim panel and mat set end plate.
Washer Pump
S084-76-672
Q: How to remove and install the washer pump motors on Mazda Millenia?
A:
In order to replace and remove the front washer fluid motor, one needs to first of all be able to remove the negative battery cable and then the windshield washer fluid reservoir. Then remove the washer motor and pump assembly, and in a similar fashion, install it in reverse of the same step. In the case of the rear washer fluid motor, start by disconnection of the negative battery cable then disconnect the rear window washer reservoir. Then take off the motor and pump assembly the installation being the same as the take-off procedure.