How to remove and install the Air Temperature Sensor and Mass Air Flow Sensor on Mazda 3?

Remove the battery cover and disconnect the cable from the negative battery terminal. Next, remove the upper engine cover by pulling it up from each side and lifting it off the mounting posts in the center. Then, take out the battery air inlet duct. Disconnect the electrical connector from the MAF/IAT sensor, followed by removing the MAF/IAT sensor mounting fasteners and taking the sensor out of the air filter housing. Installation is the reverse of removal.

How to replace the Air Temperature Sensor and Mass Air Flow Sensor on Mazda MX-5 Miata?

In models since 1994, the MAF/IAT sensor is built into a plastic tube that is mounted in between the air filter and air intake duct, which cannot be separated; on defective units, the sensor and tube are to be replaced together. Start with removing the cable on the negative battery post and the air intake duct followed by the MAF/IAT sensor on the air filter housing, the installation is the same as the removal. In 2006 and newer model years, the MAF/IAT sensor is mounted on the portion of the air filter housing on the outlet tube, and can be removed. It is first necessary to remove the cable at the negative battery terminal, followed by the removal of the electrical connector on the MAF/IAT sensor and the mounting screws and the sensor itself in the air filter housing cover followed by re-attaching it with the reverse process of removal.

Genuine Mazda Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

24 Mass Air Flow Sensors found

View related parts
Mazda Mass Air Flow Sensor Part Number: L3H5-13-215
$36.73 MSRP: $48.98
You Save: $12.25 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Flow; Air Mass Sensor, Sensor
Fits the following Mazda Models:
- 6 | 2009-2013 | S | 6 Cyl 3.7 L GAS
- B2300 | 2004-2009 | Base, SE | 4 Cyl 2.3 L GAS
- B3000 | 2004-2007 | Base, DS, SE | 6 Cyl 3.0 L GAS
- B4000 | 2004-2009 | Base, DS, SE | 6 Cyl 4.0 L GAS
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
- Tribute | 2008-2011, 2005-2006 | Hybrid, i, S | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View More
View related parts
Mazda Mass Air Flow Sensor Part Number: PE01-13-215
$217.95 MSRP: $290.65
You Save: $72.70 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Flow; Mass Air Flow Sensor
Fits the following Mazda Models:
- 3 | 2012-2018 | Grand Touring, i, i Grand Touring, I Sport, i SV, I Touring, Mazdaspeed, S, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2014-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-3 | 2016-2018 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
- CX-5 | 2019-2024, 2013-2016 | 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition Turbo, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
- MX-5 Miata | 2016-2018 | Club, Grand Touring, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View More
View related parts
Mazda Mass Air Flow Sensor Part Number: GY01-13-215R-00
$214.61 MSRP: $286.21
You Save: $71.60 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Flow; Air Mass Sensor
- Replaces: GY01-13-215
Fits the following Mazda Models:
- MPV | 2000-2006 | DX, ES, LX, LX-SV | 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Mass Air Flow Sensor Part Number: L3K9-13-215-9U
$240.86 MSRP: $321.21
You Save: $80.35 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Mass Sensor
Fits the following Mazda Models:
- 3 | 2007-2013 | Mazdaspeed, S | 4 Cyl 2.3 L GAS
- 6 | 2006-2007 | i, Mazdaspeed, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
- CX-7 | 2007-2012 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
View More
View related parts
Mazda Mass Air Flow Sensor Part Number: L321-13-215
$267.11 MSRP: $356.23
You Save: $89.12 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Flow; Air Mass Sensor
- Replaces: ZL01-13-215, ZL01-13-215R-00
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
- 3 | 2004-2013 | i, Mazdaspeed, S, SP23 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- 5 | 2012-2015, 2006-2010 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2003-2013 | i, Mazdaspeed, S | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- CX-7 | 2010-2012 | Sport, SV, Touring | 4 Cyl 2.5 L GAS
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
- Protege | 1999-2001 | DX, LX | 4 Cyl 1.6 L GAS
- RX-8 | 2004-2011 | 40th Anniversary Edition, Base, Grand Touring, R3, Shinka, Sport, Touring | 2 Cyl 1.3 L GAS
View More
View related parts
Mazda Mass Air Flow Sensor Part Number: PYFS-13-215
$268.39 MSRP: $357.92
You Save: $89.53 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Flow; Air Mass Sensor, Mass Air Flow Sensor
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2018-2021 | Sport, Touring | 4 Cyl 2.5 L GAS
- CX-3 | 2019-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
- CX-5 | 2017-2024 | 2.5 S, 2.5 S Carbon Edition, Carbon Edition, Grand Select, Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-50 | 2023-2024 | 2.5 S | 4 Cyl 2.5 L GAS
- MX-5 Miata | 2019-2023 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View More
View related parts
Mazda Mass Air Flow Sensor Part Number: HF01-13-215
$272.63 MSRP: $363.57
You Save: $90.94 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Flow; Air Mass Sensor, Mass Air Flow Sensor
- Replaced by: HF01-13-215A
Fits the following Mazda Models:
- 3 | 2021-2024 | 2.5 Carbon Turbo, 2.5 Turbo, 2.5 Turbo Premium Plus | 4 Cyl 2.5 L GAS
- CX-30 | 2021-2023 | 2.5 Turbo | 4 Cyl 2.5 L GAS
- CX-50 | 2023-2024 | 2.5 Turbo | 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Mass Air Flow Sensor Part Number: 1F20-13-210R-0A
$316.04 MSRP: $421.47
You Save: $105.43 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Flow; Air Mass Sensor
- Replaces: 1F20-13-210R-00, 1F20-13-210A, 1F20-13-210, YF09-13-215, YF09-13-215R-00
Fits the following Mazda Models:
- B2300 | 2001-2003 | Base, SE, SX | 4 Cyl 2.3 L GAS
- B3000 | 2000-2003 | Base, DS, SE, SX, Troy Lee | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
- B4000 | 2001-2003 | Base, DS, SE | 6 Cyl 4.0 L GAS
- Tribute | 2001-2006 | DX, ES, LX, S | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View More
View related parts
Mazda Mass Air Flow Sensor Part Number: B6BF-13-215
$769.28 MSRP: $1051.14
You Save: $281.86 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Flow; Air Mass Sensor
Fits the following Mazda Models:
- MPV | 1996-1998 | DX, ES, LX | 6 Cyl 3.0 L GAS
- MX-3 | 1994-1995 | Base | 4 Cyl 1.6 L GAS
- Miata | 1993-1997 | Base, LE, M Edition, STO | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
- Protege | 1995-1998 | ES | 4 Cyl 1.8 L GAS
View More
View related parts
Mazda Mass Air Flow Sensor Part Number: FS15-13-215R-00
$194.55 MSRP: $257.63
You Save: $63.08 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reman Air Flow Sensor; Mass Air Flow Sensor
- Replaces: FS15-13-215
Fits the following Mazda Models:
- 626 | 1994-1995 | DX, LX | 4 Cyl 2.0 L GAS
- MX-6 | 1994-1995 | Base | 4 Cyl 2.0 L GAS
View related parts
Mazda Mass Air Flow Sensor Part Number: FS11-13-215R-00
$205.27 MSRP: $271.92
You Save: $66.65 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reman, Airflow Sensor; Air Mass Sensor
Fits the following Mazda Models:
- 626 | 1993-1997 | DX, LX | 4 Cyl 2.0 L GAS
- MX-6 | 1993-1997 | Base | 4 Cyl 2.0 L GAS
View related parts
Mazda Mass Air Flow Sensor Part Number: FSC2-13-215R-00
$39.90 MSRP: $52.38
You Save: $12.48 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reman Air Flow Sensor; Air Mass Sensor
Fits the following Mazda Models:
- 626 | 1996-1997 | DX, LX | 4 Cyl 2.0 L GAS
- MX-6 | 1996-1997 | Base | 4 Cyl 2.0 L GAS
View related parts
Mazda Mass Air Flow Sensor Part Number: FSD7-13-215
$65.87 MSRP: $86.47
You Save: $20.60 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Flow; Air Mass Sensor
Fits the following Mazda Models:
- 626 | 1998-2002 | DX, ES, LX | 4 Cyl 2.0 L GAS
View related parts
Mazda Mass Air Flow Sensor Part Number: JE06-13-210R-0A
$43.75 MSRP: $57.43
You Save: $13.68 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reman Air Flow Sensors; Mass Air Flow Sensor
Fits the following Mazda Models:
- 929 | 1988-1991 | Base, S | 6 Cyl 3.0 L GAS
- MPV | 1989-1995 | Cargo, L, LX, LXE, Passenger | 6 Cyl 3.0 L GAS
View related parts
Mazda Mass Air Flow Sensor Part Number: B3H7-13-215R-00
Product Specifications
- Other Name: Reman Airflow Sensor; Air Mass Sensor
Fits the following Mazda Models:
- Protege | 1995-1998 | DX, LX | 4 Cyl 1.5 L GAS
View related parts
Mazda Mass Air Flow Sensor Part Number: F201-13-210R-00
Product Specifications
- Other Name: Reman Air Flow Sensors; Mass Air Flow Sensor
Fits the following Mazda Models:
- 626 | 1988-1992 | DX, GT, LE, LX, Turbo, Turbo 4WS | 4 Cyl 2.2 L GAS
- MX-6 | 1988-1992 | DX, GT, GT 4WS, LE, LX | 4 Cyl 2.2 L GAS
View related parts
Mazda Mass Air Flow Sensor Part Number: FP39-13-215R-00
Product Specifications
- Other Name: Reman Airflow Sensor; Air Mass Sensor
Fits the following Mazda Models:
- Miata | 1999-2000 | 10th Anniversary, Base, LS, SE | 4 Cyl 1.8 L GAS
- Protege | 1999-2000 | ES | 4 Cyl 1.8 L GAS
View related parts
Mazda Mass Air Flow Sensor Part Number: FS1E-13-215R-00
Product Specifications
- Other Name: Sensor, Air Flow; Air Mass Sensor
Fits the following Mazda Models:
- Miata | 2001-2005 | Base, LS, Mazdaspeed, SE, Shinsen | 4 Cyl 1.8 L GAS
- Protege | 2001-2003 | DX, ES, LX, Mazdaspeed, MP3 | 4 Cyl 2.0 L GAS
- Protege5 | 2002-2003 | Base | 4 Cyl 2.0 L GAS
View More
View related parts
Mazda Mass Air Flow Sensor Part Number: JE28-13-210R-00
Product Specifications
- Other Name: Reman Air Flow Sensors; Mass Air Flow Sensor
Fits the following Mazda Models:
- 929 | 1990-1991 | Base, S | 6 Cyl 3.0 L GAS
View related parts
Mazda Mass Air Flow Sensor Part Number: JE50-13-210R-00
Product Specifications
- Other Name: Reman Air Flow Sensors; Air Mass Sensor, Meter
Fits the following Mazda Models:
- 929 | 1992-1995 | Base | 6 Cyl 3.0 L GAS
- MX-3 | 1992-1995 | Base, GS, SE | 6 Cyl 1.8 L GAS

| Page 1 of 2 |Next >

1-20 of 24 Results

Mazda Mass Air Flow Sensor

A Mazda Mass Air Flow Sensor measures the amount of incoming air so the engine computer can mix fuel with pinpoint balance for lively power and low emissions. Mazda gains loyalty worldwide with its Kodo Soul of Motion styling, sharp steering, and Skyactiv engines that squeeze more distance out of every gallon while keeping driving fun. From nimble hatchbacks to spacious SUVs, Mazda vehicles combine responsive handling with i-Activsense safety features to help drivers stay confident on busy roads. The brand also dips its toes into electric drive and mild hybrid technology, proving that Mazda is not about to give up on excitement while moving towards a cleaner future. That same spirit of innovation is evident in the Mass Air Flow Sensor that is applied throughout the lineup. Unlike older vane meters, this modern Mass Air Flow Sensor uses a hot wire or hot film element with no moving parts that allows air to pass freely and sends faster and more accurate data even when altitude, temperature, or barometric pressure changes. Clean data allows the engine to maintain the precise air fuel ratio that Skyactiv tuning expects, protecting fuel economy and keeping exhaust clean. If dirt coats the element or a warning light flashes, quick cleaning or replacement restores smooth idle and brisk acceleration so every Mazda retains its sprightly personality intact.

You'll get great performance and real durability when you pick genuine OEM Mass Air Flow Sensor. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Mass Air Flow Sensor Parts and Q&A

Mass Air Flow Sensor
L3K9-13-215-9U
Q: How to remove and install the Air Temperature Sensor and Mass Air Flow Sensor on Mazda 3?
A:
Remove the battery cover and disconnect the cable from the negative battery terminal. Next, remove the upper engine cover by pulling it up from each side and lifting it off the mounting posts in the center. Then, take out the battery air inlet duct. Disconnect the electrical connector from the MAF/IAT sensor, followed by removing the MAF/IAT sensor mounting fasteners and taking the sensor out of the air filter housing. Installation is the reverse of removal.
Mass Air Flow Sensor
L321-13-215
Q: How to replace the Air Temperature Sensor and Mass Air Flow Sensor on Mazda MX-5 Miata?
A:
In models since 1994, the MAF/IAT sensor is built into a plastic tube that is mounted in between the air filter and air intake duct, which cannot be separated; on defective units, the sensor and tube are to be replaced together. Start with removing the cable on the negative battery post and the air intake duct followed by the MAF/IAT sensor on the air filter housing, the installation is the same as the removal. In 2006 and newer model years, the MAF/IAT sensor is mounted on the portion of the air filter housing on the outlet tube, and can be removed. It is first necessary to remove the cable at the negative battery terminal, followed by the removal of the electrical connector on the MAF/IAT sensor and the mounting screws and the sensor itself in the air filter housing cover followed by re-attaching it with the reverse process of removal.