How to remove and install Automatic Transmission Shift Levers on 2008 Mazda Tribute?

On year 2004 and below models, disconnect the negative battery post, disassemble the steering wheel and its components, disconnect the shift cable and eliminate the shift lever. In subsequent models, use the same procedure to un-fit battery, unfit trim, and unfit cables then reassemble. As necessary, adjust the shift cable.

Genuine 2008 Mazda Tribute Automatic Transmission Shift Levers

Automatic Transmission Shifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Automatic Transmission Shift Levers found

View related parts
2008 Mazda Tribute Shifter Assembly Part Number: ZZC1-46-10X
Product Specifications
- Other Name: Change Control; Gear Shift Assembly
- Item Weight: 3.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: ZZC1-46-10X
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 2008 Mazda Tribute Submodels:
- i, S | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2008 Mazda Tribute Shifter Part Number: ZZDB-46-10X
Product Specifications
- Other Name: Change Control; Gear Shift Assembly
- Item Weight: 3.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: ZZDB-46-10X
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 2008 Mazda Tribute Submodels:
- Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)

2008 Mazda Tribute Automatic Transmission Shift Levers Parts and Q&A

Q: How to remove and install Automatic Transmission Shift Levers on 2008 Mazda Tribute?
A: On year 2004 and below models, disconnect the negative battery post, disassemble the steering wheel and its components, disconnect the shift cable and eliminate the shift lever. In subsequent models, use the same procedure to un-fit battery, unfit trim, and unfit cables then reassemble. As necessary, adjust the shift cable.