How to remove and reinstall Hazard Warning Switches on Mazda MX-5 Miata?

On 2005 and earlier models, start by removing the center trim panel followed by the screws that mount the hazard flasser switch and the switch itself with installation being the opposite procedure to removal. Then snap out the knee bolster trim panel to get to the dimmer or power mirror switch, fastened to the tabs, which are pushed into place with the tabs: when installing, be sure that the tabs snap firmly into position. In the case of the power window switch, it is advised to use a small flathead screwdriver to carefully pry the switch out of a center console and then to disconnect the electrical connector before inserting it again by following the same steps and making sure that it clips back in position. In later models (2006 and above) this is done by removing the left and right side covers, glove box, center panel unit and right vent trim panel and then removing the screw retaining the hazard flasser, disconnecting the electrical connector, and removing the unit, fitting it back in reverse order. Accessing the power mirror switch requires removing the door trim panel, pushing the retaining tab and removing the switch by removing the mounting screws and installation is reversed. Lastly, remove and lift one end of the center console to release the electrical connector of the power window switch, press the tabs and push the switch out and put it back in by following the reverse steps.

Genuine Mazda Hazard Warning Switches

Hazard Flasher Switches

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

37 Hazard Warning Switches found

View related parts
Mazda Hazard Switch Part Number: K123-66-4H0
$18.33 MSRP: $24.44
You Save: $6.11 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard; Hazard Switch
Fits the following Mazda Models:
- CX-5 | 2017-2024 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Hazard Switch Part Number: TD11-66-4H0
$29.24 MSRP: $38.99
You Save: $9.75 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard
Fits the following Mazda Models:
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Hazard Switch Part Number: GKL1-66-4H0
$30.30 MSRP: $40.41
You Save: $10.11 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard
Fits the following Mazda Models:
- 6 | 2014-2017 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Hazard Switch Part Number: BHR1-66-4H0
$32.28 MSRP: $43.05
You Save: $10.77 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard
Fits the following Mazda Models:
- 3 | 2014-2016 | i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Hazard Switch Part Number: KD45-66-4H0
$33.83 MSRP: $45.12
You Save: $11.29 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard
Fits the following Mazda Models:
- CX-3 | 2016-2017 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
- CX-5 | 2013-2016 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Hazard Switch Part Number: BJS7-66-4H0
$35.53 MSRP: $47.37
You Save: $11.84 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Hazard Switch Part Number: DR61-66-4H0
$35.66 MSRP: $47.55
You Save: $11.89 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Hazard Switch Part Number: GS1D-66-4H0A
$39.28 MSRP: $52.38
You Save: $13.10 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard
- Replaces: GS1D-66-4H0
Fits the following Mazda Models:
- 6 | 2009-2013 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Hazard Switch Part Number: TK48-66-4H0
$40.51 MSRP: $54.03
You Save: $13.52 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard
Fits the following Mazda Models:
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
View related parts
Mazda Hazard Switch Part Number: GSL3-66-4H0
$42.94 MSRP: $57.25
You Save: $14.31 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard; Hazard Switch
Fits the following Mazda Models:
- 6 | 2018-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Hazard Switch Part Number: LC62-66-4H0A
$40.70 MSRP: $54.28
You Save: $13.58 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard
Fits the following Mazda Models:
- MPV | 2002-2006 | ES, LX, LX-SV | 6 Cyl 3.0 L GAS
View related parts
Mazda Hazard Switch Part Number: LC62-66-4H0
$45.39 MSRP: $60.53
You Save: $15.14 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard
Fits the following Mazda Models:
- MPV | 2000-2002 | DX, ES, LX | 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Hazard Switch Part Number: BBM2-66-4H0
$49.76 MSRP: $66.36
You Save: $16.60 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard
Fits the following Mazda Models:
- 3 | 2010-2013 | i, Mazdaspeed, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- 5 | 2012-2015 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Hazard Switch Part Number: NE51-66-4H0A
$92.16 MSRP: $122.90
You Save: $30.74 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard
Fits the following Mazda Models:
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Hazard Switch Part Number: NC10-66-4H0
$94.41 MSRP: $125.90
You Save: $31.49 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard
Fits the following Mazda Models:
- Miata | 1999-2005 | 10th Anniversary, Base, LS, Mazdaspeed, SE, Shinsen | 4 Cyl 1.8 L GAS
View related parts
Mazda Hazard Switch Part Number: EG23-66-4H0
$89.86 MSRP: $119.84
You Save: $29.98 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard
Fits the following Mazda Models:
- CX-7 | 2007-2010 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Hazard Switch Part Number: TA01-66-4H0A
$96.95 MSRP: $129.29
You Save: $32.34 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard
Fits the following Mazda Models:
- Millenia | 1995-2002 | Base, L, Millennium Edition, S | 6 Cyl 2.3 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda Hazard Switch Part Number: C291-66-170C
$142.21 MSRP: $189.66
You Save: $47.45 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch(Right), Cluster
Fits the following Mazda Models:
- 5 | 2008-2010 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
View related parts
Mazda Hazard Switch Part Number: NG20-66-4H0
$170.65 MSRP: $227.58
You Save: $56.93 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard
Fits the following Mazda Models:
- MX-5 Miata | 2007-2015 | 25th Anniversary Edition, Club, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Hazard Switch Part Number: EH44-66-4H0
$265.74 MSRP: $354.40
You Save: $88.66 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard
Fits the following Mazda Models:
- CX-7 | 2010-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS

| Page 1 of 2 |Next >

1-20 of 37 Results

Mazda Hazard Warning Switches

Mazda Hazard Warning Switches allow drivers the convenience of pressing one button to have all indicators flash simultaneously and will help to grab attention in an emergency situation and reduce the chance of a crash. Mazda began building vehicles in 1931 and has since made a name for itself for having fun handling paired with clever efficiency, thanks to rotary milestones and modern Skyactiv engines that sip fuel without dulling performance. The company sculpts every car with its flowing Kodo design so that even the daily commute feels spirited, while available i-Activ AWD and i-Activsense help like lane keeping and radar cruise watch the road and boost confidence in rough or busy conditions. Mazda is also experimenting with electric and mild hybrid power, proving that the brand continues to push the boundaries for cleaner travels while still allowing drivers to enjoy the ride. Because safety is at the heart of this philosophy, Hazard Warning Switches make a perfect fit in any Mazda cockpit. Each switch completes an electrical circuit that fires every indicator bulb in a synchronized pattern that other motorists instantly recognize as turning the entire vehicle into a bright moving beacon. Positioned within easy reach of the steering wheel, Hazard Warning Switches allow the driver to request space or assistance without taking one's eyes off of traffic and the consistent push button design applied throughout the lineup means that anyone who knows the control in one Mazda can operate it in another within seconds. Trusted, simple and highly visible, they represent the balanced combination of protection and driving joy that defines Mazda.

You'll get great performance and real durability when you pick genuine OEM Hazard Warning Switches. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Hazard Warning Switches Parts and Q&A

Hazard Switch
NG20-66-4H0
Q: How to remove and reinstall Hazard Warning Switches on Mazda MX-5 Miata?
A:
On 2005 and earlier models, start by removing the center trim panel followed by the screws that mount the hazard flasser switch and the switch itself with installation being the opposite procedure to removal. Then snap out the knee bolster trim panel to get to the dimmer or power mirror switch, fastened to the tabs, which are pushed into place with the tabs: when installing, be sure that the tabs snap firmly into position. In the case of the power window switch, it is advised to use a small flathead screwdriver to carefully pry the switch out of a center console and then to disconnect the electrical connector before inserting it again by following the same steps and making sure that it clips back in position. In later models (2006 and above) this is done by removing the left and right side covers, glove box, center panel unit and right vent trim panel and then removing the screw retaining the hazard flasser, disconnecting the electrical connector, and removing the unit, fitting it back in reverse order. Accessing the power mirror switch requires removing the door trim panel, pushing the retaining tab and removing the switch by removing the mounting screws and installation is reversed. Lastly, remove and lift one end of the center console to release the electrical connector of the power window switch, press the tabs and push the switch out and put it back in by following the reverse steps.