How to replace the hood latch and hood release cable on Mazda 3?

In order to replace the hood latch the first step is to unscrew the cable of the negative battery terminal, and in 2010 and later models the hood latch switch connector. Draw a line around the latch to line up and then remove the retaining bolts that hold the latch to the radiator support and remove the latch. Be careful the airbag front crash sensor is attached using the same mounting bolt as the hood latch, do not hit or drop the sensor to avoid damaging the sensor and will deploy the airbag. The next step is to raise the cable out of the bracket and out of the latch assembly to disconnect the cable end plug. In case of the release cable, the upper engine cover is removed by pushing it off the mounting posts by its two sides. Next, loosen the battery air inlet fasteners, air inlet, battery and battery tray. Unclips: Disconnect the release cable of the hood latch and remove the release cable clips off the fender and the wiring harness. To release the locking tab, pull the release handle down (you have to hold a small screwdriver to press the tab down) and then, now that the locking tab is released, pull the handle up and out of the instrument panel and then unscrew the release cable off the release handle and pull it through the firewall. Removal is the opposite of the installation process.

How to remove the hood latch and hood release cable on Mazda 6?

The first step to the removal of the hood latch is firstly to detach the cable to the negative battery terminal. Mark a line on the latch to match up when fitting, remove the retaining bolts attaching the hood latch to the radiator support and remove the latch. Be careful to ensure that the front airbag crash sensor is attached with the hood latch mounting bolt so as not to hit or drop the sensor and therefore not to cause damage to the sensor or activate the airbag. Secondly, pull the cable out of the bracket to release the cable out of the latch assembly and pull the cable end plug out of the latch. In the case of the release cable, in the engine compartment, loosen the hoodlatch and separate the hood release cable with the hoodlatch. Next, take out the front bumper cover and the headlight housing. Unscrew the lug nuts of the wheel, place the vehicle safely on jackstands and take away the left front wheel and the inner fender splash shield. Unscrew the release cable clips of fender and wiring harness. Within the car, press the pull lever along with a small screwdriver to press the locking tab down. Using the tab, push the handle up and out of the instrument panel, snap the release cable out of the handle and push it through the firewall. The opposite of removal is installation.

Genuine Mazda Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

73 Hood Latches found

View related parts
Mazda Lock Part Number: VA40-56-620
$35.43 MSRP: $47.24
You Save: $11.81 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Bonnet; Lock
Fits the following Mazda Models:
- CX-50 | 2023-2024 | 2.5 S, 2.5 Turbo | 4 Cyl 2.5 L GAS
View related parts
Mazda Lock Part Number: DGJ1-56-620
$44.48 MSRP: $59.31
You Save: $14.83 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Bonnet; Latch, Lock
Fits the following Mazda Models:
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Lock Part Number: TD11-56-620A
$46.46 MSRP: $61.96
You Save: $15.50 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Bonnet
- Replaces: TD11-56-620
Fits the following Mazda Models:
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Lock Part Number: EG21-56-620A
$47.20 MSRP: $62.94
You Save: $15.74 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Bonnet
- Replaces: EG21-56-620
Fits the following Mazda Models:
- CX-7 | 2007-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Lock Part Number: GBFN-56-620A
$47.26 MSRP: $63.03
You Save: $15.77 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Bonnet; Lock
- Replaces: GBFN-56-620
Fits the following Mazda Models:
- 6 | 2018-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Lock Part Number: KB7W-56-620A
$48.71 MSRP: $64.96
You Save: $16.25 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Bonnet; Lock
- Replaces: KB7W-56-620
Fits the following Mazda Models:
- CX-5 | 2017-2022 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Lock Part Number: CC29-56-620A
$50.30 MSRP: $67.08
You Save: $16.78 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Bonnet
- Replaces: CC29-56-620
Fits the following Mazda Models:
- 5 | 2006-2010 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
View related parts
Mazda Lock Part Number: DF71-56-620
$50.59 MSRP: $67.47
You Save: $16.88 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Bonnet; Lock
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Lock Part Number: KD3F-56-620A
$50.96 MSRP: $67.96
You Save: $17.00 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Bonnet; Lock
- Replaces: KD3F-56-620
Fits the following Mazda Models:
- CX-5 | 2021-2024 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Lock Part Number: KD35-56-620A
$52.05 MSRP: $69.41
You Save: $17.36 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Bonnet
- Replaces: KD35-56-620
Fits the following Mazda Models:
- CX-5 | 2013-2016 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Lock Part Number: GJ6A-56-620E
$51.69 MSRP: $68.93
You Save: $17.24 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Hood
- Replaces: GJ6A-56-620C, GJ6A-56-620B, GJ6A-56-620D
Fits the following Mazda Models:
- 6 | 2003-2008 | i, Mazdaspeed, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda Lock Part Number: GJT1-56-620B
$54.26 MSRP: $72.37
You Save: $18.11 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Bonnet
- Replaces: GJT1-56-620, GJT1-56-620A
Fits the following Mazda Models:
- 6 | 2014-2017 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Lock Part Number: BBN6-56-620A
$52.04 MSRP: $69.40
You Save: $17.36 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Bonnet; Lock
Fits the following Mazda Models:
- 3 | 2010-2013 | Mazdaspeed | 4 Cyl 2.3 L GAS
View related parts
Mazda Lock Part Number: DN4E-56-620A
$53.74 MSRP: $71.66
You Save: $17.92 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Hood; Latch, Lock
- Replaces: DN4E-56-620
Fits the following Mazda Models:
- MX-30 EV | 2022-2023 | Base, Premium Plus | BATTERY EV (EV/BEV)
View related parts
Mazda Lock Part Number: BBM6-56-620
$56.71 MSRP: $75.62
You Save: $18.91 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Hood; Lock Assembly
Fits the following Mazda Models:
- 3 | 2010-2013 | i, Mazdaspeed, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- 5 | 2012-2015 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Lock Part Number: BBM4-56-620A
$58.56 MSRP: $78.10
You Save: $19.54 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Bonnet; Lock Assembly
- Replaces: BBM4-56-620
Fits the following Mazda Models:
- 3 | 2010-2013 | i, Mazdaspeed, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- 5 | 2012-2015 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Lock Part Number: BCJH-56-620C
$59.51 MSRP: $79.37
You Save: $19.86 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Bonnet; Lock
- Replaces: BCJH-56-620B, BCJH-56-620
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Lock Part Number: TA0A-56-620
$59.70 MSRP: $79.62
You Save: $19.92 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Hood; Lock
- Replaces: TK49-56-620B, TK49-56-620D, TK49-56-620A
Fits the following Mazda Models:
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
View related parts
Mazda Lock Part Number: NE51-56-620B
$59.90 MSRP: $79.88
You Save: $19.98 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Bonnet
- Replaces: NE51-56-620A
Fits the following Mazda Models:
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Lock Part Number: EC01-56-62XK
Product Specifications
- Other Name: Lock, Hood; Lock
- Replaces: EC01-56-62XE, EC01-56-62XA, EC01-56-62XC, EC01-56-62XF, ZZTT-56-62X, EC01-56-62XH, EC01-56-62XB, EC01-56-62XG, EC01-56-62XJ, EC01-56-62XD
Fits the following Mazda Models:
- Tribute | 2001-2006 | DX, ES, i, LX, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

| Page 1 of 4 |Next >

1-20 of 73 Results

Mazda Hood Latch

The Mazda hood latch allows you to easily access your engine bay for any repairs or maintenance needs. Most of the essential and costly automotive elements are situated in that area, and thus they need the hood latch for protection. That rectangular piece of metal firmly locks the hood under high pressure. The hood latch is normally found underneath the hood. There are two types of car hood latches, which can be defined as follows: manually operated ones that can only be engaged or disengaged directly from the hood and electronically operated ones that open or close using a special cable located in the left upper corner, over there on your dashboard.

Whenever you need replacements, opt for genuine Mazda Hood Latches. Because they meet the manufacturer's criteria, it guarantees that replacements fit perfectly. Thus, these make better choices for people who care about driving. Why should you shop at MazdaPartsNow.com? We sell genuine Mazda Hood Latches. In our online catalog, there is a wide range of different parts. These are delivered directly from authorized Mazda dealers only so that customers can be sure of their security throughout any transaction while using our website. Furthermore, you can also quickly search for OEM parts you want because of our user-friendly site navigation. Choose us for a genuine Mazda Hood Latch that keeps your car running like new.

Mazda Hood Latch Parts and Q&A

Lock
BBM6-56-620
Q: How to replace the hood latch and hood release cable on Mazda 3?
A:
In order to replace the hood latch the first step is to unscrew the cable of the negative battery terminal, and in 2010 and later models the hood latch switch connector. Draw a line around the latch to line up and then remove the retaining bolts that hold the latch to the radiator support and remove the latch. Be careful the airbag front crash sensor is attached using the same mounting bolt as the hood latch, do not hit or drop the sensor to avoid damaging the sensor and will deploy the airbag. The next step is to raise the cable out of the bracket and out of the latch assembly to disconnect the cable end plug. In case of the release cable, the upper engine cover is removed by pushing it off the mounting posts by its two sides. Next, loosen the battery air inlet fasteners, air inlet, battery and battery tray. Unclips: Disconnect the release cable of the hood latch and remove the release cable clips off the fender and the wiring harness. To release the locking tab, pull the release handle down (you have to hold a small screwdriver to press the tab down) and then, now that the locking tab is released, pull the handle up and out of the instrument panel and then unscrew the release cable off the release handle and pull it through the firewall. Removal is the opposite of the installation process.
Lock
GP9A-56-620A
Q: How to remove the hood latch and hood release cable on Mazda 6?
A:
The first step to the removal of the hood latch is firstly to detach the cable to the negative battery terminal. Mark a line on the latch to match up when fitting, remove the retaining bolts attaching the hood latch to the radiator support and remove the latch. Be careful to ensure that the front airbag crash sensor is attached with the hood latch mounting bolt so as not to hit or drop the sensor and therefore not to cause damage to the sensor or activate the airbag. Secondly, pull the cable out of the bracket to release the cable out of the latch assembly and pull the cable end plug out of the latch. In the case of the release cable, in the engine compartment, loosen the hoodlatch and separate the hood release cable with the hoodlatch. Next, take out the front bumper cover and the headlight housing. Unscrew the lug nuts of the wheel, place the vehicle safely on jackstands and take away the left front wheel and the inner fender splash shield. Unscrew the release cable clips of fender and wiring harness. Within the car, press the pull lever along with a small screwdriver to press the locking tab down. Using the tab, push the handle up and out of the instrument panel, snap the release cable out of the handle and push it through the firewall. The opposite of removal is installation.