Where is the MAP sensor located and How to remove and install it on Mazda 3?

MAP sensor is found at the bottom of intake manifold just above the starter motor. Start by taking out the cover of the battery and disconnect the cable in the negative battery terminal. Then lift the upper engine cover, pressing it upwards on either side and removing it off the posts in the centre. Unplug the electrical connector and vacuum hose of the MAP sensor and loosen the retaining bolt and remove the sensor of the intake manifold. It can be useful to take off the starter motor in order to access the sensor better. Removal is the opposite of installation.

Genuine Mazda MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 MAP Sensors found

View related parts
Mazda M.A.P. Sensor Part Number: SH03-18-211
$45.81 MSRP: $61.09
You Save: $15.28 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Map; Map Sensor
Fits the following Mazda Models:
- CX-30 | 2021-2023 | 2.5 Turbo | 4 Cyl 2.5 L GAS
- CX-5 | 2019 | Signature | 4 Cyl 2.2 L DIESEL
View related parts
Mazda Map Sensor Part Number: PE02-18-211
$93.11 MSRP: $124.18
You Save: $31.07 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Boost; Map Sensor, Pressure Sensor, Tank Pressure Sensor
Fits the following Mazda Models:
- 3 | 2012-2023 | 2.0, 2.5 S, Base, Carbon Edition, Grand Touring, i, i Grand Touring, I Sport, i SV, I Touring, Preferred, Premium, s Grand Touring, s Touring, Select, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2014-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-3 | 2016-2020 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
- CX-5 | 2013-2022 | 2.5 S, 2.5 S Carbon Edition, Carbon Edition, Grand Select, Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- MX-5 Miata | 2016-2023 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View More
View related parts
Mazda Radiator Part Number: KL47-18-211A
$204.06 MSRP: $272.14
You Save: $68.08 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR,BARO (3 PIN); Brushes, Map Sensor, Radiator
Fits the following Mazda Models:
- 3 | 2004-2005 | i, S, SP23 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
- 6 | 2003-2008 | i, Mazdaspeed, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
- 626 | 1997-2002 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
- MX-6 | 1997 | Base, LS | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
- Millenia | 1997-2002, 1995 | Base, L, S | 6 Cyl 2.3 L GAS, 6 Cyl 2.5 L GAS
- Protege | 1999-2003 | DX, ES, LX, Mazdaspeed, MP3 | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Protege5 | 2002-2003 | Base | 4 Cyl 2.0 L GAS
- RX-8 | 2004-2008 | 40th Anniversary Edition, Base, Grand Touring, Shinka, Sport, Touring | 2 Cyl 1.3 L GAS
View More
View related parts
Mazda Sensor Part Number: BP4W-18-211
$269.34 MSRP: $359.19
You Save: $89.85 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, M.A.P.; Sensor
Fits the following Mazda Models:
- MPV | 2002-2006 | ES, LX, LX-SV | 6 Cyl 3.0 L GAS
- Miata | 1999-2005 | 10th Anniversary, Base, LS, Mazdaspeed, SE, Shinsen | 4 Cyl 1.8 L GAS
View related parts
Mazda Map Sensor Part Number: SH01-18-211
$54.74 MSRP: $72.99
You Save: $18.25 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Map; Map Sensor
Fits the following Mazda Models:
- CX-5 | 2019 | Signature | 4 Cyl 2.2 L DIESEL
View related parts
Mazda Map Sensor Part Number: PEDD-18-211
$68.86 MSRP: $91.83
You Save: $22.97 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Pressure; Map Sensor
Fits the following Mazda Models:
- 3 | 2014-2018 | i Grand Touring, I Sport, i SV, I Touring, Sport, Touring | 4 Cyl 2.0 L GAS
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Sensor Part Number: PY8W-18-211
$120.33 MSRP: $160.46
You Save: $40.13 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Pressure; Map Sensor, Sensor
Fits the following Mazda Models:
- 3 | 2021-2023 | 2.5 Turbo, 2.5 Turbo Premium Plus | 4 Cyl 2.5 L GAS
- 6 | 2018-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature | 4 Cyl 2.5 L GAS
- CX-30 | 2021-2023 | 2.5 Turbo | 4 Cyl 2.5 L GAS
- CX-5 | 2019-2022 | 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition Turbo, Grand Touring Reserve, Signature | 4 Cyl 2.5 L GAS
- CX-9 | 2019-2021 | Carbon Edition, Grand Touring, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Map Sensor Part Number: RF4F-18-211
$209.48 MSRP: $279.35
You Save: $69.87 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boost Sensor
- Replaces: KJ01-18-211A
Fits the following Mazda Models:
- Millenia | 1995-2002 | Base, Millennium Edition, S | 6 Cyl 2.3 L GAS
View related parts
Mazda Map Sensor Part Number: FSB8-18-211
$283.64 MSRP: $378.26
You Save: $94.62 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, M.A.P.
Fits the following Mazda Models:
- 626 | 1996-1997 | DX, LX | 4 Cyl 2.0 L GAS
- MX-6 | 1996-1997 | Base | 4 Cyl 2.0 L GAS
View related parts
Mazda Map Sensor Part Number: N3F1-18-211
$381.14 MSRP: $512.38
You Save: $131.24 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boost Sensor; Map Sensor
- Replaces: N3A1-18-211
Fits the following Mazda Models:
- RX-7 | 1993-1995 | Base, R1, R2, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda M.A.P. Sensor Part Number: Z502-18-211A
$303.90 MSRP: $405.28
You Save: $101.38 (26%)
ADD TO CART
Product Specifications
- Other Name: Sensor, M.A.P.
Fits the following Mazda Models:
- Protege | 1997-1998 | DX, ES, LX | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L GAS
View related parts
Mazda Map Sensor Part Number: Z5A6-18-211A
$312.09 MSRP: $416.20
You Save: $104.11 (26%)
ADD TO CART
Product Specifications
- Other Name: Sensor, M.A.P.
- Replaces: Z5A6-18-211
Fits the following Mazda Models:
- Protege | 1997-1998 | DX, ES, LX | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L GAS
View related parts
Mazda Map Sensor Part Number: BPS1-18-211
Product Specifications
- Other Name: Sensor, M.A.P.
Fits the following Mazda Models:
- Miata | 1996-1997 | Base, M Edition, STO | 4 Cyl 1.8 L GAS
View related parts
Mazda Map Sensor Part Number: KL47-18-215C
Product Specifications
- Other Name: Boost Sensor
Fits the following Mazda Models:
- Millenia | 1995-1996 | Base, L | 6 Cyl 2.5 L GAS
View related parts
Mazda M.A.P. Sensor Part Number: KLG4-18-215B
Product Specifications
- Other Name: Boost Sensor
Fits the following Mazda Models:
- 626 | 2000-2002 | ES, LX | 6 Cyl 2.5 L GAS
View related parts
Mazda M.A.P. Sensor Part Number: Z501-18-211
Product Specifications
- Other Name: Sensor, M.A.P.
Fits the following Mazda Models:
- 626 | 1996-1997 | ES, LX | 6 Cyl 2.5 L GAS
- MX-6 | 1996-1997 | LS, M Edition | 6 Cyl 2.5 L GAS
- Protege | 1995-1996 | DX, ES, LX | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L GAS
View More

Mazda MAP Sensor

Every part of the car is important. Your vehicle's performance will be compromised if something goes wrong with the Mazda MAP Sensor. Therefore, for your smooth driving and safety, you need regular checks and timely replacements. Whenever you need replacements, opt for genuine Mazda MAP Sensors. Because they meet the manufacturer's criteria, it guarantees that replacements fit perfectly. Thus, these make better choices for people who care about driving. Why should you shop at MazdaPartsNow.com? We sell genuine Mazda MAP Sensors. In our online catalog, there is a wide range of different parts. These are delivered directly from authorized Mazda dealers only so that customers can be sure of their security throughout any transaction while using our website. Furthermore, you can also quickly search for OEM parts you want because of our user-friendly site navigation. Choose us for a genuine Mazda MAP Sensor that keeps your car running like new.

Mazda MAP Sensor Parts and Q&A

Radiator
KL47-18-211A
Q: Where is the MAP sensor located and How to remove and install it on Mazda 3?
A:
MAP sensor is found at the bottom of intake manifold just above the starter motor. Start by taking out the cover of the battery and disconnect the cable in the negative battery terminal. Then lift the upper engine cover, pressing it upwards on either side and removing it off the posts in the centre. Unplug the electrical connector and vacuum hose of the MAP sensor and loosen the retaining bolt and remove the sensor of the intake manifold. It can be useful to take off the starter motor in order to access the sensor better. Removal is the opposite of installation.