How to check and replace the fuel sending unit in the fuel pump assembly on Mazda MX-5 Miata?

The fuel pump assembly that is in the fuel tank also incorporates the fuel level sending unit. In order to test the unit, first of all take out the fuel pump assembly of the tank. When the tank is empty the arm must be in the up position in case of a full tank. In the case of models that were produced in 1997 and below, the resistance must vary gradually between about 110 ohms and 2 to 4 ohms. In models between 1999 and 2005, the resistance would be between 93-97 ohms and 6.5-7.5 ohms. In the case of models after the year 2006, resistance between terminals A and C of the connector is measured and will vary between 200-205 ohms and 9-11 ohms with the values being approximate. In the event of invalid outcomes in the readings, the sending unit must be changed. To do so, drain the tank of fuel, pull the fuel pump assembly out, pull the electrical plug out of the fuel level sending unit and on models produced as early as 2005, unscrew the nuts holding the sending unit to the bracket and detach the sending unit. Installation is in the opposite of the sequence of removal.

How to check and replace the Fuel Sending Unit in the fuel pump assembly on Mazda Protege?

The fuel pump assembly is fitted with the fuel level sending unit which is located in the fuel tank. In order to test the resistance of the sending unit, remove the fuel pump assembly first. Measure the resistance with the float arm totally down (tank empty) and with the arm up (tank full); the resistance should be approximately 110 ohms when the float arm is down and 2 to 4 ohms when it is up and vary between these two values steadily. In case there is a misreading then the unit sending should be changed. To replace, firstly, take out the fuel pump assembly in the fuel tank and then take off the electrical connection up to the fuel level sending unit, then loosen up the nuts holding the sending unit bracket to the fuel pump assembly. Removal is the converse of installation.

Genuine Mazda Fuel Sending Unit

Fuel Sender

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

39 Fuel Sending Units found

View related parts
Mazda Fuel Gauge Sending Unit Part Number: DGH9-60-960
$27.45 MSRP: $36.61
You Save: $9.16 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gauge, Fuel Tank; Fuel Gauge Sending Unit, Fuel Sender Unit
Fits the following Mazda Models:
- CX-30 | 2020-2021 | 2.5 S, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Fuel Gauge Sending Unit Part Number: NE51-60-960
$35.13 MSRP: $46.84
You Save: $11.71 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gauge, Fuel Tank; Sending Unit
Fits the following Mazda Models:
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Fuel Gauge Sending Unit Part Number: D11B-60-960
$37.70 MSRP: $50.28
You Save: $12.58 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gauge, Fuel Tank; Fuel Gauge Sending Unit, Fuel Sender Unit
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Fuel Gauge Sending Unit Part Number: DFR9-60-960
$45.16 MSRP: $60.23
You Save: $15.07 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gauge, Fuel Tank; Fuel Gauge Sending Unit, Fuel Sender Unit
- Position: Left
Fits the following Mazda Models:
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Fuel Gauge Sending Unit Part Number: N270-60-960
$45.85 MSRP: $61.14
You Save: $15.29 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gauge, Fuel Tank; Fuel Gauge Sending Unit
Fits the following Mazda Models:
- MX-5 Miata | 2016-2023 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Fuel Gauge Sending Unit Part Number: D10S-60-960
$47.64 MSRP: $63.52
You Save: $15.88 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gauge, Fuel Tank; Fuel Gauge Sending Unit, Fuel Sender Unit
- Position: Right
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Fuel Gauge Sending Unit Part Number: DFS2-60-970
$44.66 MSRP: $59.57
You Save: $14.91 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gauge, Sub-Fuel Tank; Fuel Gauge Sending Unit, Fuel Sender Unit
- Position: Right
Fits the following Mazda Models:
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Fuel Gauge Sending Unit Part Number: D10T-60-970
$50.05 MSRP: $66.74
You Save: $16.69 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gauge, Sub-Fuel Tank; Fuel Gauge Sending Unit, Fuel Sender Unit
- Position: Left
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Housing Part Number: PE11-13-ZE0
$62.29 MSRP: $83.07
You Save: $20.78 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Body, Fuel Filter; Housing
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2014-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Sending Unit Part Number: PEAR-13-ZE0
$62.29 MSRP: $83.07
You Save: $20.78 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Body, Fuel Filter
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Fuel Gauge Sending Unit Part Number: NC10-60-960
$83.54 MSRP: $111.40
You Save: $27.86 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gauge, Fuel Tank; Fuel Sender Unit
Fits the following Mazda Models:
- Miata | 1999-2005 | 10th Anniversary, Base, LS, Mazdaspeed, SE, Shinsen | 4 Cyl 1.8 L GAS
View related parts
Mazda Fuel Gauge Sending Unit Part Number: D651-60-960
$113.43 MSRP: $151.27
You Save: $37.84 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gauge, Fuel Tank; Fuel Sender Unit
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Fuel Gauge Sending Unit Part Number: F151-60-960A
$115.28 MSRP: $153.74
You Save: $38.46 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gauge, Fuel Tank; Fuel Sender Unit
- Position: Left
- Replaces: F151-60-960
Fits the following Mazda Models:
- RX-8 | 2004-2008 | 40th Anniversary Edition, Base, Grand Touring, Shinka, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Fuel Gauge Sending Unit Part Number: TD11-60-970A
$137.31 MSRP: $183.12
You Save: $45.81 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gauge, Sub-Fuel Tank; Fuel Gauge Sending Unit
Fits the following Mazda Models:
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Fuel Gauge Sending Unit Part Number: F151-60-970B
$140.36 MSRP: $187.19
You Save: $46.83 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gauge, Fuel Tank-Inner; Fuel Sender Unit
- Position: Right
- Replaces: F151-60-970A
Fits the following Mazda Models:
- RX-8 | 2004-2008 | 40th Anniversary Edition, Base, Grand Touring, Shinka, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Fuel Gauge Sending Unit Part Number: F190-60-970
$159.50 MSRP: $212.70
You Save: $53.20 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gauge, Sub-Fuel Tank; Fuel Sender Unit
- Position: Right
Fits the following Mazda Models:
- RX-8 | 2009-2011 | Grand Touring, R3, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Fuel Gauge Sending Unit Part Number: F190-60-960
$176.49 MSRP: $235.36
You Save: $58.87 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gauge, Fuel Tank; Fuel Sender Unit
- Position: Left
Fits the following Mazda Models:
- RX-8 | 2009-2011 | Grand Touring, R3, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Fuel Pump Part Number: D10H-42-16X
$251.39 MSRP: $335.24
You Save: $83.85 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Set; Fuel Pump
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Fuel Sender Unit Part Number: BEET-42-65XA
$321.69 MSRP: $429.00
You Save: $107.31 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump&Gage, Fuel; Fuel Sender Unit
- Replaces: BEET-42-65X
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 Carbon Turbo, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Fuel Gauge Sending Unit Part Number: UE54-60-960
$71.28 MSRP: $95.06
You Save: $23.78 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Guage, Fuel; Fuel Gauge Sending Unit
Fits the following Mazda Models:
- B2200 | 1989-1993 | Base, LE-5, LX, SE-5 | 4 Cyl 2.2 L GAS
- B2600 | 1989-1993 | Base, LE-5, LX, SE-5 | 4 Cyl 2.6 L GAS

| Page 1 of 2 |Next >

1-20 of 39 Results

Mazda Fuel Sending Unit

Every part of the car is important. Your vehicle's performance will be compromised if something goes wrong with the Mazda Fuel Sending Unit. Therefore, for your smooth driving and safety, you need regular checks and timely replacements. Whenever you need replacements, opt for genuine Mazda Fuel Sending Units. Because they meet the manufacturer's criteria, it guarantees that replacements fit perfectly. Thus, these make better choices for people who care about driving. Why should you shop at MazdaPartsNow.com? We sell genuine Mazda Fuel Sending Units. In our online catalog, there is a wide range of different parts. These are delivered directly from authorized Mazda dealers only so that customers can be sure of their security throughout any transaction while using our website. Furthermore, you can also quickly search for OEM parts you want because of our user-friendly site navigation. Choose us for a genuine Mazda Fuel Sending Unit that keeps your car running like new.

Mazda Fuel Sending Unit Parts and Q&A

Fuel Gauge Sending Unit
NE51-60-960
Q: How to check and replace the fuel sending unit in the fuel pump assembly on Mazda MX-5 Miata?
A:
The fuel pump assembly that is in the fuel tank also incorporates the fuel level sending unit. In order to test the unit, first of all take out the fuel pump assembly of the tank. When the tank is empty the arm must be in the up position in case of a full tank. In the case of models that were produced in 1997 and below, the resistance must vary gradually between about 110 ohms and 2 to 4 ohms. In models between 1999 and 2005, the resistance would be between 93-97 ohms and 6.5-7.5 ohms. In the case of models after the year 2006, resistance between terminals A and C of the connector is measured and will vary between 200-205 ohms and 9-11 ohms with the values being approximate. In the event of invalid outcomes in the readings, the sending unit must be changed. To do so, drain the tank of fuel, pull the fuel pump assembly out, pull the electrical plug out of the fuel level sending unit and on models produced as early as 2005, unscrew the nuts holding the sending unit to the bracket and detach the sending unit. Installation is in the opposite of the sequence of removal.
Fuel Gauge Sending Unit
BS42-60-960
Q: How to check and replace the Fuel Sending Unit in the fuel pump assembly on Mazda Protege?
A:
The fuel pump assembly is fitted with the fuel level sending unit which is located in the fuel tank. In order to test the resistance of the sending unit, remove the fuel pump assembly first. Measure the resistance with the float arm totally down (tank empty) and with the arm up (tank full); the resistance should be approximately 110 ohms when the float arm is down and 2 to 4 ohms when it is up and vary between these two values steadily. In case there is a misreading then the unit sending should be changed. To replace, firstly, take out the fuel pump assembly in the fuel tank and then take off the electrical connection up to the fuel level sending unit, then loosen up the nuts holding the sending unit bracket to the fuel pump assembly. Removal is the converse of installation.