How to disconnect and remove the starter motor and Starter Solenoid from the battery on Mazda MPV?

de-connect the cable on the negative terminal of the battery, and take off the starter motor. Then unscrew the strap connecting the starter to the starter motor connection and unscrew the screws that hold the starter to the starter motor which is different with the four-cylinder versus V6 engines. Unscrew the starter with the starter body and take out the plunger and the spring of the plunger. Removal is the opposite of installation.

What tests can be carried out on a Starter Solenoid using a fully-charged 12-volt battery on Mazda RX-7?

A fully charged twelve-volt battery can use to run three tests on the solenoid (magnetic switch). To check the pull-in coil, apply 12 volts between the 'S' terminal and the 'M' terminal on the solenoid. To do this, jumper wires are taken from the battery to the solenoid. The positive would go to the 'M' terminal and the negative would go to 'S' terminal. If magnetic switch is forced attracted, pull in switch is okay. The holding coil can be tested by grounding the 'M' terminal to the solenoid body with a lead. Then connect a jumper wire from the positive battery to the 'S' terminal. This should pull in the plunger. If the plunger continues attracted after the 'M' terminal lead is disconnected, then it is good. To check for return, push the plunger in by hand (operating it as you normally would) and place a jumper from the negative battery terminal to the 'M' terminal and a jumper from the positive battery terminal to the solenoid body and the plunger should not be attracted to the solenoid body.

Genuine Mazda Starter Solenoid

Starter Solenoid Relay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

26 Starter Solenoids found

View related parts
Mazda Solenoid Part Number: SH05-18-X10
$108.40 MSRP: $144.56
You Save: $36.16 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
Fits the following Mazda Models:
- CX-5 | 2019 | Signature | 4 Cyl 2.2 L DIESEL
View related parts
Mazda Solenoid Part Number: PYFL-18-X10
$132.00 MSRP: $176.03
You Save: $44.03 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
Fits the following Mazda Models:
- 6 | 2018-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature | 4 Cyl 2.5 L GAS
- CX-5 | 2019-2025 | 2.5 Carbon Turbo, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition Turbo, Grand Touring Reserve, Signature | 4 Cyl 2.5 L GAS
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Solenoid Part Number: PE01-18-X10
$140.58 MSRP: $187.46
You Save: $46.88 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
Fits the following Mazda Models:
- 3 | 2012 | Mazdaspeed, S, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- CX-5 | 2013 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Solenoid Part Number: LF4J-18-X10
$155.46 MSRP: $207.33
You Save: $51.87 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
Fits the following Mazda Models:
- 3 | 2013 | Mazdaspeed, S, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- 5 | 2013-2015 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Solenoid Part Number: PE07-18-X10
$170.94 MSRP: $227.96
You Save: $57.02 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
Fits the following Mazda Models:
- 3 | 2012-2025 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Grand Touring, I Sport, I Touring, Mazdaspeed, Preferred, Premium, S, Select, Select Sport, Sport, Touring, i, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2014-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
- CX-30 | 2020-2025 | 2.5 Carbon Turbo, 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
- CX-5 | 2013-2025 | 2.5 S, 2.5 S Carbon Edition, Carbon Edition, Grand Select, Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- CX-50 | 2023-2025 | 2.5 S, 2.5 Turbo, Hybrid Preferred, Hybrid Premium | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Switch Part Number: T301-18-X10
$121.91 MSRP: $162.59
You Save: $40.68 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Solenoid
Fits the following Mazda Models:
- CX-70 | 2025 | Turbo, Turbo S | 6 Cyl 3.3 L MILD HYBRID EV-GAS (MHEV)
- CX-90 | 2024-2025 | Turbo, Turbo S | 6 Cyl 3.3 L MILD HYBRID EV-GAS (MHEV)
View related parts
Mazda Solenoid Part Number: CY01-18-X10
$130.38 MSRP: $173.87
You Save: $43.49 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
Fits the following Mazda Models:
- 6 | 2009-2010 | S | 6 Cyl 3.7 L GAS
- CX-9 | 2013-2015, 2007-2009 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Solenoid Part Number: P59D-18-X10
$134.94 MSRP: $179.96
You Save: $45.02 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
Fits the following Mazda Models:
- MX-5 Miata | 2016-2024 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF GT, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Solenoid Part Number: LF9H-18-X10
$135.14 MSRP: $180.22
You Save: $45.08 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
Fits the following Mazda Models:
- MX-5 Miata | 2009-2012 | Grand Touring, SV, Special Edition, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Solenoid Part Number: NF01-18-X10
$146.28 MSRP: $195.07
You Save: $48.79 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
Fits the following Mazda Models:
- RX-7 | 1993-1995 | Base, R1, R2, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Solenoid Part Number: K801-18-X10A
$147.16 MSRP: $196.26
You Save: $49.10 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
Fits the following Mazda Models:
- Millenia | 1996-2002 | Base, Millennium Edition, S | 6 Cyl 2.3 L GAS
View related parts
Mazda Solenoid Part Number: CA25-18-X10
$147.19 MSRP: $196.29
You Save: $49.10 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
Fits the following Mazda Models:
- 6 | 2011-2013 | S | 6 Cyl 3.7 L GAS
- CX-9 | 2010-2012 | Grand Touring, Sport, Touring | 6 Cyl 3.7 L GAS
View related parts
Mazda Solenoid Part Number: ZYF3-18-X10
$153.14 MSRP: $204.22
You Save: $51.08 (26%)
ADD TO CART
Product Specifications
- Other Name: Switch
Fits the following Mazda Models:
- 2 | 2011-2012 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Solenoid Part Number: LFG1-18-X10
$157.98 MSRP: $210.67
You Save: $52.69 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
Fits the following Mazda Models:
- MX-5 Miata | 2012-2015, 2006-2008 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, SV, Special Edition, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Solenoid Part Number: N3H1-18-X10A
$168.43 MSRP: $224.62
You Save: $56.19 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
Fits the following Mazda Models:
- RX-8 | 2004-2011 | 40th Anniversary Edition, Base, Grand Touring, R3, Shinka, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Solenoid Part Number: KLA3-18-X10
$172.29 MSRP: $229.77
You Save: $57.48 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
Fits the following Mazda Models:
- 626 | 1997-2002 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
- Millenia | 1997-2002 | Base, L | 6 Cyl 2.5 L GAS
- MPV | 2000-2001 | DX, ES, LX | 6 Cyl 2.5 L GAS
- MX-6 | 1997 | Base, LS | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View More
View related parts
Mazda Solenoid Part Number: AJ51-18-X10
$178.11 MSRP: $237.52
You Save: $59.41 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
Fits the following Mazda Models:
- 6 | 2003-2008 | S | 6 Cyl 3.0 L GAS
- MPV | 2002-2006 | ES, LX, LX-SV | 6 Cyl 3.0 L GAS
View related parts
Mazda Solenoid Part Number: N3A1-18-X10
$190.21 MSRP: $253.66
You Save: $63.45 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
Fits the following Mazda Models:
- RX-7 | 1993-1994 | Base, R1, R2, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Solenoid Part Number: ZYF2-18-X10
Product Specifications
- Other Name: Switch
Fits the following Mazda Models:
- 2 | 2011-2012 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Solenoid Part Number: N3H218X10
Product Specifications
- Other Name: Switch
Fits the following Mazda Models:
- RX-8 | 2004-2011 | 40th Anniversary Edition, Base, Grand Touring, R3, Shinka, Sport, Touring | 2 Cyl 1.3 L GAS

| Page 1 of 2 |Next >

1-20 of 26 Results

Mazda Starter Solenoid

The Starter Solenoid enables the flow of battery current to the starter motor and instantly engages the pinion with the flywheel to crank the engine. Mazda brings each vehicle to life with its SKYACTIV engines, simple structures and KODO designs that make curves and surfaces look ready to move. Mazda's i-ACTIVSENSE features include lane keep assist and radar cruise, and the all-wheel drive system i-ACTIV provides enhanced grip on rough or wet roads. Mazda has vehicles that feel sporty and perform efficiently, which is made possible by the presence of powertrains and steering that respond quickly to the driver's needs. Notably, the incorporation of electric drive and mild hybrid technology shows how Mazda creates vehicles that move towards cleaner mobility. Mazda's blend of style, safety and fun at a reasonable price is loved by drivers. The Starter Solenoid depends on a current from the ignition switch and then draws contacts closed so full battery current gets to the starter motor. The electromagnet thrusts the pinion into the ring gear. The built-in one-way clutch protects the motor once the engine fires. The device opens the circuit when the key is released so that the pinion can retract. A weak voltage may cause the solenoid to click without bridging the circuit, rendering the engine silent. A functional Starter Solenoid ensures the vital connection between the battery, starter and flywheel that delivers dependable starts throughout the Mazda lineup.

You'll get great performance and real durability when you pick genuine OEM Starter Solenoid. Mazda builds these using high-quality materials and official factory methods to ensure they hold up mile after mile. You deserve that Mazda reliability without the headache of cheap knockoffs. It is easy to find exactly what you need in our huge inventory of genuine parts. Plus, every OEM part carries a real manufacturer's warranty for your peace of mind. You will love our low prices too. Order today and we will ship your brand-new parts fast. They often reach your door in just a few days.

Mazda Starter Solenoid Parts and Q&A

Solenoid
JF0118X10
Q:
How to disconnect and remove the starter motor and Starter Solenoid from the battery on Mazda MPV?
A:
de-connect the cable on the negative terminal of the battery, and take off the starter motor. Then unscrew the strap connecting the starter to the starter motor connection and unscrew the screws that hold the starter to the starter motor which is different with the four-cylinder versus V6 engines. Unscrew the starter with the starter body and take out the plunger and the spring of the plunger. Removal is the opposite of installation.
Solenoid
N3A1-18-X10
Q:
What tests can be carried out on a Starter Solenoid using a fully-charged 12-volt battery on Mazda RX-7?
A:
A fully charged twelve-volt battery can use to run three tests on the solenoid (magnetic switch). To check the pull-in coil, apply 12 volts between the 'S' terminal and the 'M' terminal on the solenoid. To do this, jumper wires are taken from the battery to the solenoid. The positive would go to the 'M' terminal and the negative would go to 'S' terminal. If magnetic switch is forced attracted, pull in switch is okay. The holding coil can be tested by grounding the 'M' terminal to the solenoid body with a lead. Then connect a jumper wire from the positive battery to the 'S' terminal. This should pull in the plunger. If the plunger continues attracted after the 'M' terminal lead is disconnected, then it is good. To check for return, push the plunger in by hand (operating it as you normally would) and place a jumper from the negative battery terminal to the 'M' terminal and a jumper from the positive battery terminal to the solenoid body and the plunger should not be attracted to the solenoid body.