Genuine Mazda Tribute Oil Filter

Mazda Tribute Oil Filter Parts and Q&A

• Oil Filter
  YF09-14-302A
  Q: What role does an oil filter play in the importance of an oil life indicator system and how should one properly change the oil on Mazda Tribute?

  A:

  Other models have oil life indication system, which switches on a message or light on the instrument panel when the oil needs change. Worn out oil is influenced by various factors and this system usually gives more miles between changes than the conventional 3000 miles, though frequent changes of oil are suggested to the engine life. When using the option of using the oil life indicator, do not exceed 10,000 miles in between changing. Frequent oil change is essential in the preventive maintenance since old oil gets dirty and diluted causing wear on the engine. To begin with, collect all the equipment you need and rags or newspapers in case of spills. It is better to lift the vehicle using a hoist or ramps so as to have access to the oil drain plug and filter. In case they are not familiar with the car, they should find the oil drain plug and filter and should be careful of the hot exhaust parts. When the engine has attained normal working temperature, warm it to facilitate the flow of oil, then ensure that it is parked on a flat surface and the oil filler cap is removed. Securely place the vehicle on jackstands and take out the engine splash shield. Open a drain pan beneath the oil drain plug and then take off the oil drain plug with the proper tool with the help of gloves to prevent oil burns on the hands. Check the old oil to see whether it is filled with any metal particles, clean the drain plug and replace it in a tight way. Install the drain pan below the oil filter, loosen the oil filter using a filter wrench then loosen it manually using a hand while tilting the drain pan to avoid spills. Wipe off the mounting surface of the block and make sure that there is no old gasket present. Compare old filter with new filter and lubricate the gasket of the new filter with engine oil and fix it manually without overtightening. Once all the tools and materials are removed, lower the vehicle then add new oil using the filler cap with a funnel, four quarts and confirming the dipstick is even. Turn on the engine and verify that there are no leaks at the oil pan drain plug and oil filter and tighten accordingly. Look at the dipstick again after a couple of minutes and put oil in where necessary. Check the oil level and leakage during the initial few journeys after changing. Old oil can be disposed in a proper manner by ensuring that it is cooled and transported in containers to a recycling plant against improper disposal techniques.