How to remove and install Wheel Hub Bolt components with disc and drum brakes on Mazda Millenia?

In order to take out and put in the components with disc brakes, one should first raise up and support the relevant end of the vehicle securely with the help of jackstands then take out the wheel. The second step is to remove the brake pads and caliper, holding the caliper aside using wire or a coat hanger. Lift off the rotor, remove the outer wheel bearing and be careful in handling the wheel bearing. Hold the rotor in place with press bars and punch the stud out with an arbor press; no press available, the old stud may be punched out with a blunt drift taking care so as not to damage the rotor. To install it, clean the stud hole with the wire brush and begin installing the new stud with a hammer and drift pin without any lubricant or thread sealer. Install the stud with either a press or, in the absence of a press, flat washers and a lug nut to draw the stud until it is firmly seated then remove the lug nut and the washers. Install the rotor and the wheel bearings, the brake caliper and pads. Lastly, install the wheel, take out the jackstands and lower the vehicle and screw the lug nuts until the correct amount of torque. In the case of the drum brakes, lift the car and place it in jackstands and then remove the wheel and the brake drum. When necessary, take off the brake shoes. Press the stud of the axle flange with a large C-clamp and socket and apply the liquid soap on the serrated surface of the new stud and insert it into the hole. Installation requires placing flat washers on studs and screwing the lug nut, gripping the lug flange and screwing it in to ensure the stud is fully seated and then loosening the lug nut and the washers. Install the brake shoes back in place then the brake drum, and then the wheel. Lastly, take off jackstands and lower the car and screw the lug nuts to the correct torque.

Genuine Mazda Wheel Hub Bolt

Wheel Stud

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

35 Wheel Hub Bolts found

View related parts
Mazda Rotor Screw Part Number: 9983-10-816
$1.63 MSRP: $2.16
You Save: $0.53 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Screw; Drum Screw, Rotor Bolt
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
- 3 | 2019-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2006-2007 | i, Mazdaspeed, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
- CX-50 | 2023-2024 | 2.5 S, 2.5 Turbo | 4 Cyl 2.5 L GAS
- CX-7 | 2007-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
- MPV | 2000-2006 | DX, ES, LX, LX-SV | 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- MX-30 EV | 2022-2023 | Base, Premium Plus | BATTERY EV (EV/BEV)
View More
View related parts
Mazda Hub & Bearing Stud Part Number: GK2H-33-062
$1.55 MSRP: $2.07
You Save: $0.52 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt, Hub; Hub Assembly Stud
Fits the following Mazda Models:
- 6 | 2007-2013 | i, Mazdaspeed, S | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Wheel Stud Part Number: B45A-33-062
$3.91 MSRP: $5.21
You Save: $1.30 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt, Hub
Fits the following Mazda Models:
- 3 | 2014-2024 | 2.0, 2.5 S, Base, Carbon Edition, Grand Touring, i Grand Touring, I Sport, i SV, I Touring, Preferred, Premium, s Grand Touring, s Touring, Select, Select Sport, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- CX-30 | 2020-2021 | 2.5 S, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
- MX-30 EV | 2022-2023 | Base, Premium Plus | BATTERY EV (EV/BEV)
View More
View related parts
Mazda Wheel Stud Part Number: D10A-33-062
$3.91 MSRP: $5.21
You Save: $1.30 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt, Hub
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
- MX-5 Miata | 2016-2023 | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda Caliper Mount Bolt Part Number: 9YA0-2A-256
$4.05 MSRP: $5.40
You Save: $1.35 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt
Fits the following Mazda Models:
- 6 | 2018-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-5 | 2017-2024 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Hub & Bearing Mount Bolt Part Number: 9YA0-21-24C
$4.11 MSRP: $5.49
You Save: $1.38 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt; Hub Assembly Mount Bolt
Fits the following Mazda Models:
- 6 | 2014-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
- CX-5 | 2013-2023 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
- CX-9 | 2016-2023 | Carbon Edition, Grand Touring, Signature, Sport, Touring, Touring Plus | 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Wheel Stud Part Number: B455-33-062
$5.60 MSRP: $7.47
You Save: $1.87 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt, Hub; Hub Bolt, Wheel Bolt
Fits the following Mazda Models:
- 929 | 1995 | Base | 6 Cyl 3.0 L GAS
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
- Miata | 1999-2005, 1994-1997 | 10th Anniversary, Base, LS, M Edition, Mazdaspeed, SE, Shinsen, STO | 4 Cyl 1.8 L GAS
- Protege | 1990-2003 | DX, ES, LX, Mazdaspeed, MP3, SE | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Protege5 | 2002-2003 | Base | 4 Cyl 2.0 L GAS
- RX-7 | 1995 | Base, R2, Touring | 2 Cyl 1.3 L GAS
- RX-8 | 2004-2011 | 40th Anniversary Edition, Base, Grand Touring, R3, Shinka, Sport, Touring | 2 Cyl 1.3 L GAS
View More
View related parts
Mazda Hub Assembly Mount Bolt Part Number: 9YA1-61-405
$5.81 MSRP: $7.76
You Save: $1.95 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt; Hub Assembly Mount Bolt
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
- CX-50 | 2023-2024 | 2.5 S, 2.5 Turbo | 4 Cyl 2.5 L GAS
- MX-30 EV | 2022-2023 | Base, Premium Plus | BATTERY EV (EV/BEV)
View More
View related parts
Mazda Wheel Stud Part Number: B01Y-33-062
$5.94 MSRP: $7.92
You Save: $1.98 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt, Hub; Hub Bolt
Fits the following Mazda Models:
- 323 | 1990-1994 | Base, SE | 4 Cyl 1.6 L GAS
- 929 | 1992-1994 | Base | 6 Cyl 3.0 L GAS
- MX-3 | 1992-1995 | Base, GS, SE | 4 Cyl 1.6 L GAS, 6 Cyl 1.8 L GAS
- Miata | 1999-2005, 1990-1993 | 10th Anniversary, Base, LE, LS, Mazdaspeed, SE, Shinsen | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
- Protege | 1995-2003, 1990-1991 | 4WD, DX, ES, LX, Mazdaspeed, MP3 | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Protege5 | 2002-2003 | Base | 4 Cyl 2.0 L GAS
- RX-7 | 1993-1994 | Base, R1, R2, Touring | 2 Cyl 1.3 L GAS
View More
View related parts
Mazda Wheel Stud Part Number: GJ6A-33-062
$6.19 MSRP: $8.25
You Save: $2.06 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt, Hub; Wheel Stud
Fits the following Mazda Models:
- 6 | 2003-2005 | i, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
- CX-7 | 2007-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- CX-9 | 2007-2015 | Grand Touring, Sport, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View More
View related parts
Mazda Wheel Stud Part Number: GR1L-33-062A
$6.38 MSRP: $8.50
You Save: $2.12 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt, Hub; Wheel Stud
- Replaces: GR1L-33-062, GR1A-33-062
Fits the following Mazda Models:
- 6 | 2006-2013 | i, Mazdaspeed, S | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda Wheel Stud Part Number: KD31-33-062
$6.54 MSRP: $8.72
You Save: $2.18 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt, Hub
Fits the following Mazda Models:
- 3 | 2014-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Grand Touring, i Grand Touring, I Sport, i SV, I Touring, Preferred, Premium, s Grand Touring, s Touring, Select, Select Sport, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2014-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
- CX-5 | 2013-2024 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
- CX-50 | 2023-2024 | 2.5 S, 2.5 Turbo | 4 Cyl 2.5 L GAS
- MX-30 EV | 2022-2023 | Base, Premium Plus | BATTERY EV (EV/BEV)
View More
View related parts
Mazda Wheel Stud Part Number: F151-33-062
$6.61 MSRP: $8.81
You Save: $2.20 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt, Hub; Wheel Stud
Fits the following Mazda Models:
- MX-5 Miata | 2006-2015 | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
- RX-8 | 2004-2011 | 40th Anniversary Edition, Base, Grand Touring, R3, Shinka, Sport, Touring | 2 Cyl 1.3 L GAS
View related parts
Mazda Wheel Stud Part Number: D651-33-062
$7.79 MSRP: $10.39
You Save: $2.60 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt, Hub
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Wheel Stud Part Number: D652-33-062
$7.86 MSRP: $10.48
You Save: $2.62 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt, Hub
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Hub Mount Bolt Part Number: 9YA0-2A-022
$8.11 MSRP: $10.81
You Save: $2.70 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Rotor Bolt Part Number: 9YA0-21-083F
$14.53 MSRP: $19.37
You Save: $4.84 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt
- Replaces: 9YA0-21-083B, 9YA0-21-083C, 9YA0-21-083D
Fits the following Mazda Models:
- 3 | 2004-2006 | i, S, SP23 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda Wheel, Spare Bolt Part Number: G030-56-961
$1.98 MSRP: $19.85
You Save: $17.87 (91%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clamp, Spare Tire
Fits the following Mazda Models:
- Protege | 1999-2003 | DX, ES, LX, Mazdaspeed, MP3 | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Protege5 | 2002-2003 | Base | 4 Cyl 2.0 L GAS
View related parts
Mazda Wheel, Spare Bolt Part Number: G14R-56-961A
$18.21 MSRP: $24.29
You Save: $6.08 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt
- Replaces: G14R-56-961
Fits the following Mazda Models:
- Protege | 1999-2003 | DX, ES, LX, Mazdaspeed, MP3 | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Protege5 | 2002-2003 | Base | 4 Cyl 2.0 L GAS
View related parts
Mazda Hold Down Bolt Part Number: 8532-56-961
Product Specifications
- Other Name: Clamp, Spare Tire
Fits the following Mazda Models:
- CX-7 | 2007-2012 | Grand Touring, Sport, SV, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
- Protege | 1999-2003 | DX, ES, LX, Mazdaspeed, MP3 | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Protege5 | 2002-2003 | Base | 4 Cyl 2.0 L GAS
View More

| Page 1 of 2 |Next >

1-20 of 35 Results

Mazda Wheel Hub Bolt

Every part of the car is important. Your vehicle's performance will be compromised if something goes wrong with the Mazda Wheel Hub Bolt. Therefore, for your smooth driving and safety, you need regular checks and timely replacements. Whenever you need replacements, opt for genuine Mazda Wheel Hub Bolts. Because they meet the manufacturer's criteria, it guarantees that replacements fit perfectly. Thus, these make better choices for people who care about driving. Why should you shop at MazdaPartsNow.com? We sell genuine Mazda Wheel Hub Bolts. In our online catalog, there is a wide range of different parts. These are delivered directly from authorized Mazda dealers only so that customers can be sure of their security throughout any transaction while using our website. Furthermore, you can also quickly search for OEM parts you want because of our user-friendly site navigation. Choose us for a genuine Mazda Wheel Hub Bolt that keeps your car running like new.

Mazda Wheel Hub Bolt Parts and Q&A

Wheel Stud
J00Y-33-062
Q: How to remove and install Wheel Hub Bolt components with disc and drum brakes on Mazda Millenia?
A:
In order to take out and put in the components with disc brakes, one should first raise up and support the relevant end of the vehicle securely with the help of jackstands then take out the wheel. The second step is to remove the brake pads and caliper, holding the caliper aside using wire or a coat hanger. Lift off the rotor, remove the outer wheel bearing and be careful in handling the wheel bearing. Hold the rotor in place with press bars and punch the stud out with an arbor press; no press available, the old stud may be punched out with a blunt drift taking care so as not to damage the rotor. To install it, clean the stud hole with the wire brush and begin installing the new stud with a hammer and drift pin without any lubricant or thread sealer. Install the stud with either a press or, in the absence of a press, flat washers and a lug nut to draw the stud until it is firmly seated then remove the lug nut and the washers. Install the rotor and the wheel bearings, the brake caliper and pads. Lastly, install the wheel, take out the jackstands and lower the vehicle and screw the lug nuts until the correct amount of torque. In the case of the drum brakes, lift the car and place it in jackstands and then remove the wheel and the brake drum. When necessary, take off the brake shoes. Press the stud of the axle flange with a large C-clamp and socket and apply the liquid soap on the serrated surface of the new stud and insert it into the hole. Installation requires placing flat washers on studs and screwing the lug nut, gripping the lug flange and screwing it in to ensure the stud is fully seated and then loosening the lug nut and the washers. Install the brake shoes back in place then the brake drum, and then the wheel. Lastly, take off jackstands and lower the car and screw the lug nuts to the correct torque.