How to remove and install Automatic Transmission Shift Levers and their shift knobs on Mazda 3?

To install or remove the shift knob unscrew it off the shifter and to install it follow the process of removing in the reversed order. The shift lever assembly process should start with disconnection of the cable with the negative battery terminal and waiting a minimum of two minutes. Then take off the floor console. Carefully pry the cable eye on the ballstud on the shifter with a trim tool and remove the cable on the back of the housing with the same trim tool, being careful not to bend the cable where it meets the housing or it can be damaged. Unscrew the electrical connector at the shift assembly, followed by removing the four mounting bolts then dismount the shift assembly out of the floor. To install, do the steps in reverse and also reconnect the shift cable whenever it has been pulled off.

How to remove and install Automatic Transmission Shift Levers on Mazda 6?

The shift knob can be removed by unscrewing it to the shift lever assembly and then removing it. To install, reverse the procedure. To do this, you must first disconnect the cable with the negative battery terminal and allow at least two minutes to pass before proceeding. The second step is to take off the floor console indicator panel. Disconnect the interlock cable to the shift lever by lifting out the lock pin then disconnect the cable end of the lever and the cable housing of the lever base. Take the and slide the cable end off the shift assembly by pulling the catch at the bottom of the cable housing pushing it up and out of the bracket and slide the end of the cable off the lever. The shift assembly can be removed by disconnecting any electrical connectors at the shift assembly, and then removing the four mounting nuts to remove the shift assembly out of the floor. To install, undo the steps of removal, and make sure that when the shift cable has been disconnected there is an adjustment made.

Genuine Mazda Automatic Transmission Shift Levers

Automatic Transmission Shifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

62 Automatic Transmission Shift Levers found

View related parts
Mazda Shifter Assembly Part Number: KE40-46-100C
$165.51 MSRP: $220.73
You Save: $55.22 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Select; Gear Shift Assembly
- Replaces: KE40-46-100A, KE40-46-100B
Fits the following Mazda Models:
- 3 | 2014-2017 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2014-2017 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
- CX-5 | 2013-2016 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View More
View related parts
Mazda Shifter Part Number: VA45-46-100B
$172.93 MSRP: $230.62
You Save: $57.69 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Select; Shifter
- Replaces: VA45-46-100A
Fits the following Mazda Models:
- CX-50 | 2023-2024 | 2.5 S, 2.5 Turbo | 4 Cyl 2.5 L GAS
View related parts
Mazda Shifter Part Number: BCKN-46-100A
$196.69 MSRP: $262.31
You Save: $65.62 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Select; Gear Shift Assembly, Shifter
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Preferred, Premium, Select | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Shifter Assembly Part Number: DF71-46-100D
$204.03 MSRP: $272.08
You Save: $68.05 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Select; Gear Shift Assembly
- Replaces: DF71-46-100C
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Shifter Part Number: DGL2-46-100A
$210.03 MSRP: $280.10
You Save: $70.07 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Select; Gear Shift Assembly, Shifter
- Replaces: DGL2-46-100
Fits the following Mazda Models:
- CX-30 | 2020-2023 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, Base, Preferred, Premium, Select | 4 Cyl 2.5 L GAS
View related parts
Mazda Shifter Part Number: KB8A-46-100
$214.93 MSRP: $286.62
You Save: $71.69 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Select; Gear Shift Assembly, Shifter
Fits the following Mazda Models:
- CX-5 | 2017-2024 | 2.5 S, 2.5 S Carbon Edition, 2.5 Turbo, 2.5 Turbo Signature, Carbon Edition, Carbon Edition Turbo, Grand Select, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS
View related parts
Mazda Shifter Assembly Part Number: BJS7-46-100A
$231.93 MSRP: $309.30
You Save: $77.37 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Select; Gear Shift Assembly
- Replaces: BJS7-46-100
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Shifter Part Number: DA6B-46-100
$248.25 MSRP: $331.06
You Save: $82.81 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Select; Gear Shift Assembly
Fits the following Mazda Models:
- CX-3 | 2016-2021 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda Shifter Assembly Part Number: BJT1-46-100C
$260.73 MSRP: $347.71
You Save: $86.98 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Select; Gear Shift Assembly
- Replaces: BJT1-46-100A, BJT1-46-100B
Fits the following Mazda Models:
- 3 | 2014-2018 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Shifter Assembly Part Number: GRT7-46-100
$275.23 MSRP: $367.04
You Save: $91.81 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Select; Gear Shift Assembly, Shifter Assembly
Fits the following Mazda Models:
- 3 | 2018 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2018-2020 | Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Shifter Assembly Part Number: DR62-46-10X
$290.00 MSRP: $386.74
You Save: $96.74 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Change Control; Gear Shift Assembly
Fits the following Mazda Models:
- 2 | 2011-2014 | Sport, Touring | 4 Cyl 1.5 L GAS
View related parts
Mazda Shifter Part Number: GRV1-46-100A
$295.94 MSRP: $394.66
You Save: $98.72 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Select Lever; Gear Shift Assembly, Shifter, Shifter Assembly
- Replaces: GRV1-46-100
Fits the following Mazda Models:
- 3 | 2018 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2017-2021 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Shifter Assembly Part Number: BHN2-46-100E
$323.39 MSRP: $431.27
You Save: $107.88 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Select Lever; Gear Shift Assembly, Shifter Assembly
- Replaces: BHN2-46-100C, BHN2-46-100D
Fits the following Mazda Models:
- 3 | 2014-2017 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- 6 | 2014-2017 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Shifter Assembly Part Number: GHR5-46-100E
$324.55 MSRP: $432.82
You Save: $108.27 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Select; Gear Shift Assembly
- Replaces: GHR5-46-100D, GHR5-46-100A, GHR5-46-100, GHR5-46-100C
Fits the following Mazda Models:
- 6 | 2014-2017 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Shifter Part Number: CG25-46-100
$362.36 MSRP: $483.24
You Save: $120.88 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Select; Gear Shift Assembly
Fits the following Mazda Models:
- 5 | 2012-2015 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda Shifter Part Number: BDTV-46-100B
$365.48 MSRP: $487.40
You Save: $121.92 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Select; Gear Shift Assembly, Shifter
- Replaces: BCKA-46-100A, BCKA-46-100B, BDTV-46-100A
Fits the following Mazda Models:
- 3 | 2019-2024 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Shifter Assembly Part Number: BFD1-46-100
$349.75 MSRP: $466.43
You Save: $116.68 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Select; Gear Shift Assembly
Fits the following Mazda Models:
- 3 | 2012-2013 | i, Mazdaspeed, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda Shift Lever Part Number: BR5V-46-100A
Product Specifications
- Other Name: Lever, Select; Gear Shift Assembly
Fits the following Mazda Models:
- 3 | 2007-2009 | Mazdaspeed, S | 4 Cyl 2.3 L GAS
View related parts
Mazda Shift Lever Part Number: BP4K-46-100C
Product Specifications
- Other Name: Select Lever; Gear Shift Assembly
- Replaces: BP4K-46-100A
Fits the following Mazda Models:
- 3 | 2004-2009 | i, S, SP23 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda Shifter Assembly Part Number: BBM7-46-100F
Product Specifications
- Other Name: Lever, Select; Gear Shift Assembly
- Replaces: BBM7-46-100C, BBM7-46-100E
Fits the following Mazda Models:
- 3 | 2010-2013 | S | 4 Cyl 2.5 L GAS

| Page 1 of 4 |Next >

1-20 of 62 Results

Mazda Automatic Transmission Shift Levers

Every part of the car is important. Your vehicle's performance will be compromised if something goes wrong with the Mazda Automatic Transmission Shift Lever. Therefore, for your smooth driving and safety, you need regular checks and timely replacements. Whenever you need replacements, opt for genuine Mazda Automatic Transmission Shift Levers. Because they meet the manufacturer's criteria, it guarantees that replacements fit perfectly. Thus, these make better choices for people who care about driving. Why should you shop at MazdaPartsNow.com? We sell genuine Mazda Automatic Transmission Shift Levers. In our online catalog, there is a wide range of different parts. These are delivered directly from authorized Mazda dealers only so that customers can be sure of their security throughout any transaction while using our website. Furthermore, you can also quickly search for OEM parts you want because of our user-friendly site navigation. Choose us for a genuine Mazda Automatic Transmission Shift Lever that keeps your car running like new.

Mazda Automatic Transmission Shift Levers Parts and Q&A

Shift Lever
BR5V-46-100A
Q: How to remove and install Automatic Transmission Shift Levers and their shift knobs on Mazda 3?
A:
To install or remove the shift knob unscrew it off the shifter and to install it follow the process of removing in the reversed order. The shift lever assembly process should start with disconnection of the cable with the negative battery terminal and waiting a minimum of two minutes. Then take off the floor console. Carefully pry the cable eye on the ballstud on the shifter with a trim tool and remove the cable on the back of the housing with the same trim tool, being careful not to bend the cable where it meets the housing or it can be damaged. Unscrew the electrical connector at the shift assembly, followed by removing the four mounting bolts then dismount the shift assembly out of the floor. To install, do the steps in reverse and also reconnect the shift cable whenever it has been pulled off.
Gear Shift Assembly
GP7B-46-10XA-02
Q: How to remove and install Automatic Transmission Shift Levers on Mazda 6?
A:
The shift knob can be removed by unscrewing it to the shift lever assembly and then removing it. To install, reverse the procedure. To do this, you must first disconnect the cable with the negative battery terminal and allow at least two minutes to pass before proceeding. The second step is to take off the floor console indicator panel. Disconnect the interlock cable to the shift lever by lifting out the lock pin then disconnect the cable end of the lever and the cable housing of the lever base. Take the and slide the cable end off the shift assembly by pulling the catch at the bottom of the cable housing pushing it up and out of the bracket and slide the end of the cable off the lever. The shift assembly can be removed by disconnecting any electrical connectors at the shift assembly, and then removing the four mounting nuts to remove the shift assembly out of the floor. To install, undo the steps of removal, and make sure that when the shift cable has been disconnected there is an adjustment made.